• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.1-7
• /
• 2005

In order to secure the traffic safety especially in the entrance waterway of harbour, it is important that the breakwater and the port facilities should be designed properly considering ship-handling difficulty and traffic flow. In this study, the lateral force acting on ship hull under the external force(wind, current, wave) is investigated quantitatively for the container ship approaching to the Busan and Gamcheon breakwater. The relation of ship-handling difficulty to the breakwater and the arrangement of ship's routine are examined based on the lateral force under the external force. Some of reviews to secure traffic safety on the design of breakwater are discussed.

• Journal of Biosystems Engineering
• /
• v.31 no.3 s.116
• /
• pp.168-174
• /
• 2006

The purpose of this study is to develop the cold chain system by developing optimal phase change materials (PCM). There are some benefits from developing this system such as keeping freshness of agriculture products, saving energy, etc. The major results are as follows. To decide a latent heat material, the characteristics of water, sodium, polyacrylate, ethanol and N-tetradecane are analysed. Also, an insulating material is made by mixing water, nucleating agent and latent heat material, using cementing method. In addition, the sensitivity analysis for developed latent heat material($K_l,\;K_2,\;K_3$) is conducted. For $K_l,\;K_2,\;K_3$ which cans keep latent heat temperature, ranging from $0\;to\;5^{\circ}C,\;5\;to\;10^{\circ}C,\;10\;to\;15^{\circ}C$. it can keeps latent heat temperature at radiant heat (5, 12, $17^{\circ}C$) and transportation latent heat container both melting temperature and amount of latent heat of Kl are $-1.6{\pm}1.0^{\circ}C$, 326.51 J/g, respectively and freezing temperature and latent heat are $-7.98{\pm}1.5^{\circ}C$ and 174.18 J/g. and $K_2$ are $7.41{\pm}1.5^{\circ}C$, 89.80 J/g, respectively and freezing temperature and latent heat are $-2.14{\pm}1.5^{\circ}C$ and 83.90 J/g. and $K_3$ are $9.54{\pm}1.0^{\circ}C$, 145.42 J/g, respectively and freezing temperature and latent heat are $0.21{\pm}1.0^{\circ}C$ and 152.48 J/g.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.5
• /
• pp.577-582
• /
• 2015

This paper is the fundamental study for the application of cold storage system to the transportation equipment by sea and land. This numerical study presents the solid-liquid phase change phenomenon of calcium chloride solution of 30wt %. The governing equations are 1-dimensional unsteady state heat transfer equations of $1^{st}$ order partial differential equations. This type of latent heat storage material is often usable in fishery vessel for controlling the temperature of container with constant condition. The governing equation was discretized with finite difference method and the program was composed with Mathcad program. The main parameters of this solution were the initial temperature of heat storage material, ambient temperature of cold air and the velocity of cold air. The data of boundary layer thickness becomes thin with the increasing of cold air flowing velocity and also the heat storage completion time become shorten.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.199-211
• /
• 2018

Ever since Korea was geopolitically divided into North and South Korea in the 1940s, South Korea has depended on maritime transportation for global trade and logistics. Now, however, South Korea is preparing to develop a new global route for trans-Eurasia logistics passing through North Korea. Even though there are difficulties to overcome, South Korea expects that a new overland route, shorter than the existing seaways in the Europe-Asia section, will bring more frequent trade with more rapid and cost-effective logistics services in the future. Related to this issue, this study aims to proactively analyze dynamic logistics changes in South Korea when a trans-Korea railway is developed and linked with the trans-China railway and the trans-Siberian railway. This study employed a system dynamics simulation approach to model the logistics system in South Korea. The simulation results indicated that the traffic of the Uiwang inland container depot near the capital area may increase but the traffic of the Port of Busan may decrease. With supplementary research, consequently, follow-up studies on adjusting the traffic capacity in Korea are required to attain successful trans-Eurasia logistics by rail.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.405-413
• /
• 2006

In general mechanical servo systems, friction deteriorates the performance of controllers by its nonlinear characteristics. Especially, friction phenomenon causes steady-state tracking errors and limit cycles in position and velocity control systems, even though gains of controllers are tuned well in linear system model. Even if sensor is used higher accuracy level, it is difficult to improve tracking performance of the position to the same level with a general control method such as PID type. Therefore, many friction models were proposed and compensation methods have been researched actively. In this paper, we consider that the variation of mover's mass is various by loading and unloading. The normal force variation occurs by it an other parameters. Therefore, the proposed control system is composed of main position controller and a friction compensator. A parameter estimator for a nonlinear friction model is designed by adaptive control law and adaptive backstepping control method.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.55-64
• /
• 2007

In general mechanical servo systems, friction deteriorates the performance of controllers by its nonlinear characteristics. Especially, friction phenomenon causes steady-state tracking errors and limit cycles in position and velocity control systems, even though gains of controllers are tuned well in linear system model. Even if sensor is used higher accuracy level, it is difficult to improve tracking performance of the position to the same level with a general control method such as PID type. Therefore, many friction models were proposed and compensation methods have been researched actively. In this paper, we consider that the variation of mover's mass is various by loading and unloading. The normal force variation occurs by it and other parameters. Therefore, the proposed control system is composed of main position controller and a friction compensator. A parameter estimator for a nonlinear friction model is designed by adaptive control law and adaptive backstepping control method.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.515-521
• /
• 2015

The purpose of this study was to analyze the weights of obstacle factors against mutual access of towed trailers of car-ferry between South Korea and China using Fuzzy-AHP. To this end, factors were first selected through literature research and finally selected through in-depth interviews with a group of experts in cargoes who are currently in car-ferry companies. Selected high rank obstacle factors included unstable service provision, limited policy support, and additional costs being incurred and among them, unstable service provision was identified as the most serious obstacle factor through analysis. Eleven measurement variables selected include insufficient supply of container yard, trailer insurance and management issues, insufficient special equipment, insufficient specialized manpower, limited input service courses, insufficient marketing and public relations strategies, and increasing transportation costs and among them, increasing equipment returning costs due to unbalanced cargo gathering were identified as the most serious obstacle factor through analysis followed by limited input service courses, insufficient special equipment, delays in procedures, and occurrence of additional procedures in order of precedence.

• Journal of Korea Port Economic Association
• /
• v.30 no.1
• /
• pp.143-157
• /
• 2014

Most metropolitan shippers (MS) have used trans pacific route (TPR) or Asia-Europe route (AEP) through Busan port (BP). If Incheon new port (INP) sets up the deep water-depths under -16m, however, there might be a change in MS's port choice behavior (PCB). In this respect, the aim of this paper is to estimate an INP's allotment rate for metropolitan cargo using Logit Model (LM) considering changing global shipping and port environment. This paper reviews previous studies related to shippers' PCB then sets up the utility function (UF) including the dummied dependent variable which is comprised of BP and INP, and some independent variables such as the frequency of liner shipping route (TPR), inland transportation fare, and the rate of container terminal service. As a result of LM analysis, BP has 0.6618 and INP has 0,3382.

• Journal of Korea Port Economic Association
• /
• v.38 no.2
• /
• pp.123-138
• /
• 2022

Korea has been huge investments in its port system, annually upgrading its infrastructure to turn the ports into Asian hub port. However, while Busan port is ranked fifth globally for container throughput, Other Korean ports are ranked much lower. This article applies Data Envelopment Analysis (DEA) and Malmquist Productivity Index (MPI) to evaluate selected major Korean seaports' operational efficiency and productivity from 2010 to 2018. It further integrates Principal Component Analysis (PCA) into DEA, with the PCA-DEA combined model strengthening the basic DEA results, as the discriminatory power weakens when the variable number exceeds the number of Decision Making Units(DMU). Meanwhile, MPI is applied to measure the seaports' productivity over the years. The analyses generate efficiency and productivity rankings for Korean seaports. The results show that except for Gwangyang and Ulsan port, none of the selected seaports is currently efficient enough in their operations. The study also indicates that technological progress has led to impactful changes in the productivity of Korean seaports.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.3
• /
• pp.191-198
• /
• 2024

Korea is an import and export-oriented economy that relies on shipping transportation, and sea ports play an important role in national economic growth. To secure and maintain the competitiveness of these ports, hardware and software investments are required, but policy support can also be expected to have an effect. This study identified the irrationality of the system by exploratory analysis of the port facility fee discount system for Ulsan Port, an energy hub port, and suggested improvement measures to resolve it.This study analyzed the volume of Ulsan Port and the reduction of port facility usage fees for about 10 years and identified irrational factors that despite a special port for liquid cargo, a considerable reduction for container cargo is concentrated, and even because it was a passing ship, 100% reduction for entrance and clearance fees were provided to them, which could cause serious moral hazard.. As a way to improve the port facility charge discount system at Ulsan Port, this study proposed strengthening support for eco-friendly activities to support containers, adjusting the reduction rate for passing ships, or improving the reduction and exemption application process.