• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.408-409
• /
• 2011

Transshipment cargo volume in 2010 compared to 1st quarter 2011 increased 8.43 percent of busan port for transshipment of cargo. thus transshipment of cargo is growing among, south east container terminals and Horando area of new port is planing to develop using small dock for the operations in order to enable. therefore, this study is to deduce implications for operating activation about 6 berths of feeder port in pusan new port that is planing to develop with dock that could be docked very large container ships and feeder dock that could be handled transshipment of cargo.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.239-240
• /
• 2018

In order to improve the productivity and continuous competitiveness of container terminals, it is necessary to make efforts to reduce operational losses at each terminal. As a study on this, it is necessary to study the non-productivity movement based on the shuffle(re-handling) in the yard analysis is needed. In this study, non - productive activity factors were classified by prefecture, transporter, shippers and terminal based on operation data of domestic A terminal. As a result, 14.7% is due to the causes of shipping companies and shipping companies, and in addition, 85.3% of the respondents indicated that they were responsible for the terminal operation. In order to minimize the above factors, it is necessary to reduce the non-productive activity through rapid information processing and pre-information acquisition from shipping companies, and minimize the influence of bulge-out through installation of concrete blocks in the equipment field.

• Journal of Navigation and Port Research
• /
• v.38 no.5
• /
• pp.493-501
• /
• 2014

An automated lifting vehicle(ALV) used in an automated container terminal is a type of unmanned vehicle that can self-lift a container as well as self-transport it to a destination. To operate a fleet of ALVs efficiently, one needs to be able to determine a minimum-time route to a given destination whenever an ALV is to start its transport job. To find a route free from any collision or deadlock, the occupation time of the ALV on each segment of the route should be carefully scheduled to avoid any such hazard. However, it is not easy because not only the travel times of ALVs are uncertain due to traffic condition but also the operation times of cranes en route are not predicted precisely. In this paper, we propose a routing method based on an ant colony optimization algorithm that takes into account these uncertainties. The result of simulation experiment shows that the proposed method can effectively find good routes under uncertainty.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.317-323
• /
• 2006

This paper deals with High Stacking System(HSS) development to develop a next generation port handling system for accommodating mega-sized container ships. It aims to develop the HSS that maximizes handling capacity within the limited space of the port. The system is expected to resolve the problem of yard space shortage as well as utilize innovative technology to ensure high-performance and automation at the terminal so as to enhance stevedoring productivity. The main objectives of this paper is suggesting the design concept drawing the HSS terminal and simulation analysis was undertaken taking into consideration performance of handling equipment, and port handling system Design concept drawing of the HSS terminal and will be used as base data for basic design and detailed design in actual operations of the terminal in the future. The HSS, to be applied to both conventional and new terminals, is expected to act as a catalyst for enhancing the value-added at ports.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.1
• /
• pp.237-246
• /
• 2015

In this paper, Improved productivity models of container terminal are provided by utilizing a simulation considering Tandem-lift Quay Crane and transport vehicle of container's high productivity 'Alternative ship-to-yard vehicles.' Feature of this method is deriving the data of tandem-lift Quay Crane and Alternative ship-to-yard vehicles, estimating the productivity model of tandem-lift Quay Crane by using regression analysis. Tandem-lift Quay Crane is equipment of loading and unloading to increase productivity approximately by 2 time existing (single, twin) Quay Crane by dealing with four 20ft containers or two 40ft containers at the same. Alternative ship-to-yard vehicles can transfer containers(4TEU) more than existing Yard Tractor. This paper is deriving the optimal combination showing the highest productivity by using simulation considering Tandem-lift Quay Crane and Alternative ship-to-yard vehicles on container terminals and developing estimating model of productivity by using regression analysis using data of simulation.

• Journal of Navigation and Port Research
• /
• v.45 no.3
• /
• pp.102-108
• /
• 2021

The purpose of this study is to develop a proactive methodology for disruption due to uncertainty in vessels' arrival time. As worldwide imports and exports increased rapidly, the importance of berth planning in container terminals has increased accordingly. Since the berth plan determines the capacity of the container terminal, it aims to maximize efficiency by minimizing the time and space gap between the vessels. In reality, several uncertainties disrupt the initial berth plan resulting in economic losses. In this study, we propose a robust berth plan for preventing disruption.

• Journal of Korea Port Economic Association
• /
• v.31 no.4
• /
• pp.91-106
• /
• 2015

This study aims to analyze the effects of service quality offered by automotive Ro-Ro terminal operators on customer satisfaction and loyalty. The results of the research can be used to understand how to enhance the service level in order to manage competitiveness of the terminal operators, finally resulting in global competitiveness of the automobile industry of Korea in both exports and imports. We carried out a survey on two groups: shippers (customers) and providers (related terminal operators and stakeholders). To identify and classify the factors into groups, we conducted Exploratory Factors Analysis (EFA) and Confirmatory Factor Analysis (CFA), which showed construct validity and convergent validity. We also calculated Cronbach's alpha for reliability. Five factor groups were identified: tangibles, reliability, responsiveness, assurance, and empathy. We found that empathy is the most influential factor group among the five groups, and that the other groups too exhibited similar effects. Based on the results of the survey and analyses, we can conclude that empathy is most important in automotive Ro-Ro terminals. In particular, specialties, training, experiences, and loyalty of employees are crucial factors because automotive Ro-Ro terminals significantly rely on work forces, differently from other bulk terminals and container terminals. Flexible working hours and fringe benefits for work forces can increase empathy, finally resulting in productivity and efficiency. Next, well-designed work schedules are followed, based on visibility through logistics and SCM activities in automobile export and import processes with information and communication networks.

• Journal of Navigation and Port Research
• /
• v.40 no.4
• /
• pp.223-230
• /
• 2016

While marine transport freight is steadily increasing, people are more interested in terminals handling cargo. But the domestic researches on terminals were almost on container terminal. This study attempted to study the service quality for bulk terminals. The users of bulk terminal services were divided into shipowners and shippers to compare their differences by using bulk terminal service provided. During the attributions proposed in this study, Tangibles were descripted by the numbers of berth or depth, facilities, and so on. So it was suitable to consider the tangibles by formative indicators. And also this study has tried using "reflective model" and "formative model" to make a measurement model for comprehensive analyses. The results showed that all of the items were significant except the relation between empathy and performance satisfaction in the overall measurement model analyses. User groups difference analyses results have showed that the trust responsiveness impact on performance satisfaction was more importantly assessed by shippers than by shipowners. It was expected to use the results of this study as a good strategic resource to help bulk terminal administrators make various expansion plans to improve the bulk terminal's competitiveness in the future.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1071-1074
• /
• 2005

This paper suggests how can we guarantee terminal quality of service like ship waiting time ratio and ship residing time applying RFID(Radio Frequence IDentification) technology, raising up rapidly as a fundamental solution of new growing industry, to port information system. Also, lead time of whole port logistics can be decreased for reduction of loading & discharging time resulted from productivity improvement of G/C(Gantry Crane) and YT(Yard Tract) etc as applying RFID technology to terminal operation.

• Journal of Navigation and Port Research
• /
• v.28 no.7
• /
• pp.635-640
• /
• 2004

In this paper, a tracking algorithm for autonomous navigation of automated guided vehicles (AGVs) operating in container terminals is presented. The developed navigation algorithm takes the form of a federated information filter used to detect other AGVs and avoid obstacles using fused information from multiple sensors. Being equivalent to the Kalman filter (KF) algebraically, the information filter is extended to N-sensor distributed dynamic systems. In multi-sensor environments, the information-based filter is easier to decentralize, initialize, and fuse than a KF-based filter. It is proved that the information state and the information matrix of the suggested filter, which are weighted in terms of an information sharing factor, are equal to those of a centralized information filter under the regular conditions. Numerical examples using Monte Carlo simulation are provided to compare the centralized information filter and the proposed one.