• 생명과학회지
• /
• 제14권1호
• /
• pp.163-166
• /
• 2004

정수용 입상활성탄(Granular Activated Carbon, GAC)에서 발생하는 세균 생장 현상을 파악하기 위해 활성탄 칼럼을 제작하고, 수돗물을 고정식 상향류 방식으로 (EBCT = 0.92~1분) 통수시켰다. 봄에는 14일 동안 세균수의 파과(breakthrough) 현상이 없었다. 여름에는 야자계와 석탄계 활성탄 칼럼의 유출 세균수는 비슷하여 파과전에 $10^2$ CFU/ ml수준으로 유입수보다 낮았지만, 10일 이후 유출수가 $10^3$ CFU/ml 로 유입수의 $10^2$ CFU/ml보다 높은 값을 보였다. 칼럼 내부 4지점의 활성탄을 깊이에 따라 분석했을 때 유입수 유입부에 가까울수록 많은 세균수가 관찰되었고 세균군집의 활성은 유사하였다 성장하는 세균은 야자계와 석탄계 활성탄이 서로 달랐지만 Acinetobacter 속이 우점을 이루고 있는 것으로 나타났다.

• 품질경영학회지
• /
• 제34권4호
• /
• pp.78-92
• /
• 2006

While many services appear, it are performed in the various researches about a service. Among them, as to the basic reason for measuring the service level, in order to find out the strategy improving service quality. But the method for measuring quality of services up to date was unable to make it enough the role. This research tried to propose the approach systematically analyzing the human errors in order to improve service quality about the call center which utilizes the information technology. In fact, the human errors was found in the customer contact point in which the actual service is delivered. An interaction between the element for comprising call service was classified into 3 while defining the human error as 3 group. Moreover, the process where a service is delivered was classified according to 5 step and the generated error was measured in each step. The implication of this research looks at the service failure and dissatisfaction as the occurrence of the human errors and illustrates the service quality improvement as a correction or a reduction. This approach is used that service is materially easily understood and is formulated with the quality improvement strategy.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.166-171
• /
• 2001

In order to improve the efficiency of the design process and the quality of the resulting design for the application-based exclusive rolling element bearings, this study propose design methodologies by using a genetic-based combinatorial optimization. By the presence of discrete variables such as the number of rolling element (standard component) and by the engineering point of views, the design problem of the rolling element bearing can be characterized by the combinatorial optimization problem as a fully discrete optimization. A genetic algorithm is used to efficiently find a set of the optimum discrete design values from the pre-defined variable sets. To effectively deal with the design constraints and the multi-objective problem, a ranking penalty method is suggested for constructing a fitness function in the genetic-based combinatorial optimization. To evaluate the proposed design method, a robust performance analyzer of ball bearing based on quasi-static analysis is developed and the computer program is applied to some design problems, 1) maximize fatigue life, 2) maximize stiffness, 3) maximize fatigue life and stiffness, of a angular contact ball bearing. Optimum design results are demonstrate the effectiveness of the design method suggested in this study. It believed that the proposed methodologies can be effectively applied to other multi-objective discrete optimization problems.

• 센서학회지
• /
• 제7권3호
• /
• pp.197-202
• /
• 1998

맥파신호는 심장과 심혈관계에 관련된 중요한 정보를 포함하고 있는 중요한 생체신호이다. 본 연구에서는 맥파신호를 비관혈적으로 검출하기 위해 기존의 기계적 변환방식의 개념에 근거하여 광섬유를 이용하는 맥파 검출용 트랜스듀서를 새로이 개발하여 사용하였다. 기계적 변환방식에서 발생될 수 있는 맥동전달 효율을 개선시키기 위해 본 연구에서는 맥동하는 피부와 접촉하여 센서에 전달하는 검출부(detecting part)와, 전달받은 변위운동을 광 출력 변화에 따른 전기 신호로 변환하는 감지부(sensing part)의 두 부분이 조합된 구조를 갖는 설계방식을 제안하였다. 우리는 이러한 조합형 구조의 설계방식을 이용한 결과로 기존의 트랜스듀서로 검출이 어려운 맥파의 C점(절흔)과 T파를 검출할 수 있음을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제14권4호
• /
• pp.242-250
• /
• 1989

The performance of a vertical type centrifugal distributor of granular materials was studied by means of mathematical models and experimental investigations. To develop the mathematical description of particle motion, some assumptions were made. The distribution process consisted of three stages: the entrance of a particle to the blade, the motion of the particle on the blade, and the motion of the particle in the air. The physical properties of fertilizer, which affected the particle motion, were investigated: bluk density, coefficient of friction, coefficient of restitution, and particle size distribution. The particle motion were simulated by using a computer. A prototype distributor was designed and constructed for experimental tests. The following conclusions were drawn from the computer simulation and experiment results. 1. The fertilizer may slide or roll at the point of contact when they impact on the blade and move along the blade. 2. The interaction among fertilizers may prevent them from bouncing. 3. When fertilizers roll on the blade, rolling resistance is one of the factors affecting the particle's motion. 4. The trajectory angle and position of fertilizers from a disc depend on the blade position and particle shape, but the rotating speed of the disc affected them only slightly.

• 인터넷정보학회논문지
• /
• 제9권2호
• /
• pp.139-145
• /
• 2008

CRM(Customer Relationship Management)은 비즈니스 환경에서 기업의 이익과 경쟁적 우위를 차지할 수 있도록 하는 비즈니스 전략이다. 기업의 고객 응대 기법으로는 인터넷, E-mail, SMS(Short Message Service), 텔레포니 서비스, DM(Direct Mail)이 이용되고 있다. 최근 수익성 모델 향상을 위한 노력으로 기존 고객의 이탈 방지 및 유지, 신규 고객의 가입 및 유지를 통한 비즈니스 모델을 다각화하고 있다. 또한 고객의 최초 접점이 될 수 있는 CRM 센터의 업무 프로세스 재설계(Business Process Re-engineering), 업무 프로세스 관리(Business Process Management)가 빈번하게 발생하고 있다. 본 논문에서는 고객응대 CRM 모델 구축시의 고려 사항을 제시하고 콜 객체 라우팅(Call Object Routing)을 위한 에이젼트(Agent)를 제안하고 구현 및 성능평가를 하였다. 제안한 모델은 대 고객 응대 CRM 모델로 효율적으로 이용될 수 있다.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.304-307
• /
• 2015

Carbon nanotubes (CNTs) have been widely accepted and used as the enhancer for polymer nano-composites due to their remarkable mechanical properties. Understandably, the CNT fiber-polymer matrix interface plays a major role in determining the properties of the CNT-polymer nano-composites. Here, using the LCAODFT Lab tool available on the EDISON Nano-Physics site, we performed first-principles density-functional theory calculations to determine the atomic configurations and binding energies of the CNTs in contact with polymers. For the polymer matrixes, we chose poly(acrylonitrile) (PAN), which is one of the most well-known polymer matrixes for the carbon nanofiber nanocomposites. Different chiralities and diameters of pristine CNTs were considered, and several PAN-CNT configurations were prepared based on the atomistic positions and directions of cyano group in PAN. The most favorable configuration of PAN was obtained when the PAN bound parallel to the surface of CNT. Our finding indicates the binding configurations are determined by the direction of the cyano group dominantly rather than the atomistic position of PAN, or the symmetry of CNTs. The result of increasing the length of CNT diameter suggests that PAN is inclinable to align evenly on the surface of relatively large size of CNT with the configuration parallel to the surface. These results obtained in this study will provide the starting point for the design of improved PAN-CNT composites for the next-generation ultra-strong and ultra-light carbon nanofibers.

• 한국주조공학회지
• /
• 제17권3호
• /
• pp.276-285
• /
• 1997

The effect of wheel surface condition on solidification behavior of Al-Cu ribbon was investigated in order to establish extreme levels of heat extraction. The condition of wheel surface was changed either by heating the wheel surface up to $200^{\circ}C$ or by coating boron nitride(BN) onto the the rim of a wheel. Heating the wheel surface up to $200^{\circ}C$ improved the wetting behavior between the molten metal and the rotating wheel, leading to an increase in the ratio of columnar structure to the entire thickness of Al-4.3wt%Cu and Al-33.2wt%Cu ribbons. For Al-4.3wt%Cu ribbon, assuming one grain as a single heterogeneous nucleation event at the contact point, the nucleation density with the wheel surface heated to $200^{\circ}C$, was $4{\times}10^6/mm^2$, and in the cases of BN coating with thin and thick layers, $10^5/mm^2$ and $5{\times}10^4/mm^2$, respectively. The largest cooling capacity of the wheel corresponded to the heated wheel surface, and as the thickness of BN coating layer increased, the cooling capacity of the wheel gradually decreased.

• 한국지열·수열에너지학회논문집
• /
• 제11권1호
• /
• pp.7-14
• /
• 2015

This study has been purposed to provide thermal comfort range in accordance with the residential style of radiant floor heating space, and to compare it with the thermal comfort range at predicted mean vote. The survey for the thermal sensation vote to the subjects and the measurement of environmental factors has been executed, and regression analysis has been performed. It is interpreted that the combination of the physical factor and the psychological factor results lower neutral point of the floor sitting style than that of the chair sitting style. There are some difference between the measured predicted mean vote and the thermal sensation vote via survey, which appears to be caused by distinctive heat transfer characteristic of floor radiant heating space, such as, high radiant temperature and contact thermal sensation of floor surface.

• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.19-23
• /
• 2004

The Hertzian indentation contact damage behavior of porous alumina with controlled pore shape was investigated by experiments. Porous alumina ceramics containing well-defined pore shape, size and distribution were prepared by incorporation of fugitive spherical starch. Porous alumina with isolated pore structure was prepared with porosity range up to 30%. The indentation stress-strain curves of porous alumina were constructed. Elastic modulus and yield stress can be obtained from the stress-strain relationship. Impulse excitation method for the measurement of elastic modulus was also conducted as well as Hertzian indentation and was confirmed as a useful tool to evaluate the elasticity of highly porous ceramics. Elastic modulus of the inter-connected pore structure is more sensitive to porosity than that of the isolated pore structure. When the specimen had isolated pore structure, higher yield point was obtained than it had inter-connected pore structure. This study proposed that the elastic modiulus of porous ceramics is strongly related to not only porosity, but also the structure of pore.