• 대한기계학회논문집
• /
• 제13권5호
• /
• pp.837-846
• /
• 1989

본 연구에서는 일반적인 평벨트 구동의 Eytelwein식을 이용하여 가공물이 풀리와 풀리사이의 벨트에서 연삭되는 벨트 접촉식 연삭에서 벨트 장력분포를 이론 및 실험적으로 구하고 벨트와 풀리사이의 내접촉 특성을 밝혀 벨트 연삭장치의 효율 개선을 위한 설계자료를 구하고자 하였다.

• 한국가시화정보학회지
• /
• 제10권3호
• /
• pp.21-24
• /
• 2012

Although the motion of the three-phase contact line on a solid substrate has been extensively studied thus far, the understanding of the dynamics of the contact line of liquid/liquid/gas phases is far from complete. Here we deposit a drop of isopropyl alcohol (IPA) on water and HFE-7100 whose free surfaces are exposed to air to observe the flow field around the contact line. By combining the shadowgraph and high-speed imaging techniques, we find that vortices are spontaneously generated at the contact line, which grow in size with time. The flow is attributed to the Marangoni stress that pulls a liquid of lower-surface tension toward a liquid surface having a higher surface tension. However, it is not still clear why the entrained lower-surface-tension liquid should whirl rapidly beneath the contact line. We also visualize the flow by the particle image velocimetry (PIV) to find out that the rotational velocity reaches the order of 1 mm/s near the free surface.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.619-620
• /
• 2013

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.144-150
• /
• 2001

Considered is non-symmetric contact traction induced by the tilting of a contact body and/or by a far field bulk tensile load to the other body. The problem is under the regime of plane strain. General profile of the contact end is incorporated and partial slip condition is supposed. As an example contact configuration, an indentation of a punch with rounded corners onto a half plane is studied. The variation of the internal stress field due to the tilting and the bulk tension is investigated. An edge crack problem is analyzed to examine the influence of the non-symmetric traction. It is shown that the tilting of a punch does not influence the behaviour of the crack. Rather, the effect of the bulk tension on the cracking behaviour is found considerable.

• 한국전산구조공학회논문집
• /
• 제24권1호
• /
• pp.33-41
• /
• 2011

본 연구에서는 비부착형 포스트텐션 시스템의 해석에 적용할 수 있는 모델링기법을 제시하였다. 모델링은 유한요소 해석 프로그램을 이용하였으며, tube-to-tube contact 요소를 도입하여 강연선의 물리적 형상을 직접적으로 모델링하는 방법과 실제의 강연선 외에 가상의 강연선을 콘크리트에 매입하고, 두 개의 강연선을 스프링으로 연결하여 간접적으로 모델링하는 방법을 동시에 제시하고 비교하였다. 콘크리트의 인장경화 현상을 무시하였을때 두 모델링기법에서는 거의 동일한 결과를 제공하지만 콘크리트의 인장경화를 고려한 경우에는 스프링을 이용한 간접적인 모델링기법을 통해서만 결과를 얻을 수 있었으며, 결과 또한 콘크리트의 경화현상을 고려하지 않은 경우와 다소 상이하였다. 비교를 통하여 비부착형 포스트텐션 시스템의 모델링기법으로 스프링을 이용한 모델링기법을 최종적으로 선정하고 기존의 실험적 연구에서 인용한 실험결과와 해석결과를 비교, 검증하였으며 또한 파라미터 스터디를 통해서 모델링의 적절성을 확인하였다.

• Smart Structures and Systems
• /
• 제29권3호
• /
• pp.475-484
• /
• 2022

The loss of cable tension for civil infrastructure reduces structural bearing capacity and causes harmful deformation of structures. Currently, most of the structural health monitoring (SHM) approaches for cables rely on contact transducers. This paper proposes a cable tension identification technology using percussion sound, which provides a fast determination of steel cable tension without physical contact between cables and sensors. Notably, inspired by the concept of tensioning strings for piano tuning, this proposed technology predicts cable tension value by deep learning assisted classification of "percussion" sound from tapping a steel cable. To simulate the non-linear mapping of human ears to sound and to better quantify the minor changes in the high-frequency bands of the sound spectrum generated by percussions, Mel-frequency cepstral coefficients (MFCCs) were extracted as acoustic features to train the deep learning network. A convolutional neural network (CNN) with four convolutional layers and two global pooling layers was employed to identify the cable tension in a certain designed range. Moreover, theoretical and finite element methods (FEM) were conducted to prove the feasibility of the proposed technology. Finally, the identification performance of the proposed technology was experimentally investigated. Overall, results show that the proposed percussion-based technology has great potentials for estimating cable tension for in-situ structural safety assessment.

• 한국안광학회지
• /
• 제19권1호
• /
• pp.23-30
• /
• 2014

목적: 본 연구에서는 콘택트렌즈 관리용품의 세척력 평가를 위해 미셀임계농도 평가법, 표면장력 평가법 및 단백질세척효율평가법의 상관관계에 대해 알아보고자 하였다. 방법: 계면활성제의 미셀임계농도와 실제 콘택트렌즈 관리용액의 계면활성제 농도를 문헌과 관련 자료들을 이용하여 조사하였다. 표면장력기기로 $25{\pm}1^{\circ}C$에서 콘택트렌즈 관리용액의 표면장력을 측정하였으며, lotrafilcon A, comfilcon A, balafilcon A재질의 렌즈를 인공누액에 14일 동안 침착시킨 후 콘택트렌즈 관리용액으로 세척하여 세척효율을 비교하였다. 결과: 콘택트렌즈 관리용품 22제품 중 계면활성제 농도가 표시된 제품은 9제품이었으며 문헌상의 미셀임계농도보다 계면활성제 농도가 더 높은 제품은 7제품이었다. 표면장력을 측정한 결과 대체적으로 소프트렌즈용 관리용품의 표면장력이 다른 관리용품보다 낮음을 알 수 있었으며, 렌즈에 침착된 단백질 제거효과 분석 결과에서는 표면장력이 더 낮은 제품의 단백질 제거효율이 더 높은 것을 알 수 있었다. 결론: 콘택트렌즈 관리용액의 계면활성제 농도가 높은 경우 표면장력이 낮으며, 표면장력이 낮을수록 침착된 단백질 세척 효율이 높아져 세척력 평가법 간에 서로 상관관계가 있음을 밝혔다.

• 전기학회논문지
• /
• 제64권12호
• /
• pp.1789-1795
• /
• 2015

The pulley-type tensioning device subjected to a maximum tension of 34 kN has been developed for 400 km/h high-speed railway. The tensioning device is to maintain the tension variation within 3% of the normal value, irregardless of temperature changes. Field tests shows that the tensioning device had a variation of tension which was as small as 0.6% as temperatures changed from $-5{\sim}7^{\circ}C$. Along with the tensions, we measured its X and Y movements due to the temperature changes. Based on a combination of its X and Y movements, we proposed a new performance index with which we can see if the tensioning device has troubles in operation without tension measurements.

• 한국자동차공학회논문집
• /
• 제25권2호
• /
• pp.133-139
• /
• 2017

The timing chain system, which is a typical power transmission technology applied to a vehicle, has been widely used by the automotive industry because it is normally designed to last a car's lifetime. However, the timing chain system may cause some problems due to the shape of the chains and the polygonal behavior on contact between the chain and the sprocket. In addition, noise and vibration caused by transmission error are the most typical problems encountered by major automotive manufacturers and they are considered as the main source of customer complaint. The initial tension of the chain-sprocket system is thought to be the main cause of transmission error, and it is regarded as the source of engine vibration and noise. The initial tension of the chain system should be controlled carefully since a low initial tension can cause twisting, which may lead to a system malfunction, while a high initial tension can reduce the service life due to a worn down contact surface. In this paper, the kinematic analysis model is generated with various initial tensions, which are controlled by changing the shape of the fixed guide with the largest contact surface with chain. The results showed that the transmission error was minimized on a particular range of initial tension, and the tendency showed that the error changed with a higher sensitivity at a lower initial tension.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.261-265
• /
• 2016

Surface tension is a major factor in the thermodynamics as well as fluid properties of Magneto-Rheological Fluids (MRF). We measured the surface tension of an MRF using two different methods. A wettability characterization based on contact angles measurements for the fluid interacting with two different surfaces was conducted. A hydrocarbon based commercial MRF with more than 80% solid weight, placed on quartz and poly-tetra-fluoroethylene (PTFE) surfaces was used. We measured the fluids' surface tension value by means of contact angles measurements and by the falling drop method.