• Sijohaknonchong
• /
• v.25
• /
• pp.145-174
• /
• 2006

The purpose of this study is to research the correlation of Sijo with Akjang. In Joseon Dynasty, the contact of folk music and court music was brisk. Although they had some political premises, many Jeongjaes presented in the royal court parties accepted Gagok, one of the representative folk song genres. It was an eye-opening matter. The song words sung by Gagok music accompaniment were the lyrics of Sijo. We can give Sijo that was used in diverse royal court parties as an typical example about introduction of folk music to the court music. A lot of Goryeo Dynasty's Jeongjaes were introduced to Joseon Dynasty nearly as they are. Naturally so most Sokak-gasas were. Bukjeon was sung to Jinjak tune which Jeong-gwajeong was sung. Bukjeon in the music book Akhak-Guebum is a long song, but instead Bukjeons in the music book Geumhapjabo and Yang'geum-sinbo are short. It suggests that the poetic form of Sijo was introduced to the Lyric of royal court music from a point of time in the early Joseon Dynasty. Especially, Bukjeon had been continued to the late Joseon Dynasty after exchanging to the lyric form of Sijo. Bukjeon had been used In the royal court to the first half of Joseon Dynasty It became established in the repertory of Gagok after spreading to people out of court. Turnover from the long Bukjeon to the short was a result that the folk music influenced royal court music. Bukjeon. song words praying King's longevity. was used in the diverse situations such as a small royal parties, royal archery, and King's outing. It can be a clue that the Korean song words continued to late Joseon Dynasty were used for the lyric of royal court music. In the correlation of the poetic form of Sijo and Akjang, we can find out some characteristics different from our common sense to distinguish royal court music from folk music.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.528-543
• /
• 2005

Statement of problem: Repeated delivery and removal of abutment cause some changes such as wear, scratch or defect of hexagonal structure. It may increase the value of rotational freedom(RF) between hexagonal structures. Purpose: The purpose of this study was to evaluate surface changes and rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment after repeated delivery and removal under SEM and toolmaker's microscope. Materials and methods: Implant systems used for this study were 3i and Avana. Seven pail's of implant fixture, abutment and abutment screws for each system were selected and all fixtures were perpendicularly mounted in liquid unsaturated polyesther with dental surveyor. Each one was embedded beneath the platform of fixture. Surfaces of hexagonal structure before repeated closing and opening of abutment were observed using SEM and rotational freedom was measured by using toolmaker's microscope. Each abutment was secured to the implant future by each abutment screw with recommended torque value using a digital torque controller and was repeatedly delivered and removed by 20 times respectively. After experiment, evaluation for the change of hexagonal structures and measurement of rotational freedom were performed. Result : The results were as follows; 1. Wear of contact area between implant fixture and abutment was considerable in both 3i and Avana system. Scratches and defects were frequently observed at the line-angle of hexagonal structures of implant fixture and abutment. 2. In the SEM view of the external hexagon of implant fixture, the point-angle areas at the corner edge of hexagon were severely worn out in both systems. It was more notable in the case of 3i systems than in that of Avana systems. 3. In the SEM view of the internal hexagon of abutment, Gingi-Hue abutment of 3i systems showed severe wear in micro-stop contacts that were machined into the corners to prevent rotation and cemented abutment of Avana systems showed wear in both surface area adjacent to the corner mating with external hexagon of implant fixture. 4 The mean values of rotational freedom between the external hexagon of the implant fixture and internal hexagon of abutment were 0.48$\pm$0.04$^{\circ}$ in pre-tested 3i systems and 1.18$\pm$0.25$^{\circ}$ after test, and 1.80$\pm$0.04$^{\circ}$ in pre-tested Avana systems and 2.61$\pm$0.16$^{\circ}$ after test. 5. Changes of rotational freedom after test shouted statistical)y a significant increase in both 3i and Avana systems(P<0.05, paired t-test). 6. Statistically, there was no significant difference between amount of increase in the rotational freedom of 3i systems and amount of increase in that of Avana ones(P>0.05, unpaired t-test). Conclusion: Conclusively, it was considered that repeated delivery and remove of abutment by 20 times would not have influence on screw joint stability. However, it caused statistically the significant change of rotational freedom in tested systems. Therefore, it is suggested that repeated delivery and remove of abutment should be minimal as possible as it could be and be done carefully Additionally, it is suggested that the means or treatment to prevent the wear of mating components should be devised.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.116-126
• /
• 2013

Glycol ethers are a group of solvents based on alkyl ethers of ethylene glycol commonly used in paints. These solvents typically have a higher boiling point, together with the favorable solvent properties of lower-molecular weight ethers and alcohols. The word "Glycol ethers" was registered as a United States trademark by Union Carbide Corp. Typically, glycol ethers are found in pharmaceuticals, sunscreens, cosmetics, inks, dyes and water based paints. On the other hand, glycol ethers are used in degreasers, cleaners, aerosol paints and adhesives. Most glycol ethers are relatively water soluble, biodegradable and only a few are considered toxic. Therefore, they are unlikely to pose an adverse risk to the environment. Recent study suggests that occupational exposure to glycol ethers is related to low motile sperm count in men, but the finding has been disputed by others. In this study, skin permeation of 3 types glycol ethers were studied in vitro using matrix such as solvent and detergent. The absorption of glycol ethers[methyl glycol ethers(MC), ethyl glycol ethers(EC) and butyl glycol ethers(BC)] has been measured in vitro through rat skin. Epidermal membranes were set up in Franz diffusion cells and their permeability to PBS measured to establish the integrity of the skin before the glycol ethers were applied to the epidermal surface. Absorption rates for each glycol ethers were determined and permeability assessment made to quantify any irreversible alterations in barrier function due to contact with the esters. Types of glycol ethers in vitro experimental results on MC> EC> BC quickly appeared in the following order: skin permeation was beneficial to the skin permeation small molecular weight, the difference in chemical structure, such as hydrophilic, because with the partition coefficient and solubility mechanisms and passive diffusion to increase the speed at which transmission is considered.

• Korean Security Journal
• /
• no.39
• /
• pp.161-183
• /
• 2014

The job burnout of the private security guards who provide services through contact with customers can affect the overall the private security industry. So the managers need to make efforts to diagnose and evaluate the job burnout and provide continuous provision for the repatriation effect. However, up to the present, the job burnout measure for the private security guards has not been provided, so the objectivity of the information is questionable. For this reason, in order to establish the goodness of fit of the job burnout scale for private security guards based on the contents of the job burnout scale that was being provided to other service employees, this research aims to provide the scale to provide objective information compared with that of the past by applying the Rasch model of the item response theory. To achieve this purpose, the data on 379 private security guards working for the private security guard companies in the Gyeonggi region were collected, and the data were processed to suit the research purpose using SPSS 18.0 and AMOS 18.0, Winsteps programs. Through these research procedures, the following conclusion was obtained. With regard to the private security guards' measure of job burnout, as a result of factor analysis through the collected data, 4 questions were deleted, and as a result of the analysis of the goodness of the fit based on 18 questions, 4 questions were found to be inappropriate questions that did not satisfy the standard value, and the scope of the difficulty level of the questions from - 98 to 1.30 and the response reaction of a 5-point scale were found to suit the final private security guards' job burnout scale. In other words, the conclusion that it is appropriate to measure the private security guards job burnout scale with 3 factors and 13 questions was obtained. So if private security guards companies collect systematic data using the scale established in this research, and practice refresher training accordingly, they can reduce the private security guards' job burnout.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.1
• /
• pp.69-81
• /
• 2015

Under the premise that parks have been a performing field of welfare ideology that benefits the citizen from the past, the present study began with a basic question on what substance a park has and how it has worked. Therefore, this study tried to find out the theoretic background that can explain the roles of a park as an instrument for welfare, of which topic is currently being discussed, and examine how the ideology in the debate regarding welfare characteristics of parks are differentiated from those of social welfare. In addition, this study divided the process of development of parks defined by Galen Cranz in an attempt to view how welfare benefits offered by parks have changed in their development and looked into the roles and types of welfare functions that parks provided to the citizens under a certain social situation by period. Furthermore, the characteristics and development of the ideology underlying a welfare park were examined by function and element in its progression. The results of this study are as follows. The functions that parks have performed so far can be classified into three categories. First, they have a remedial function. Parks have given direct services to 'the socially disadvantaged' such as relief, fostering, and rehabilitation. Second, parks have played a preventive function. They aim to reinforce the functions of individual, family, group, and community. Third, they have exerted a developmental function. They function to promote change of society in a way for it to contribute to social development. Looking into the roles and functions of parks from the perspective of their beneficiary class and benefits, the following were discovered. First, the beneficiaries of welfare characteristics in parks have expanded to the general public from the poor class, and the benefits of parks have spread into the public including the underprivileged in a real sense. Second, the significance of welfare characteristics in parks has also changed from literal benefits to caring for basic human rights. Third, the purpose of welfare characteristics in parks has changed from providing minimal conditions to optimal conditions. At its beginning, the ideology of welfare in parks remained ideal, confining itself to their idealistic characteristics; but as time went on, they created several social benefits in response to various social demands, developing into a field where welfare ideology manifests and is realized in an active manner. Furthermore, it was witnessed that the parks and welfare of the present times are standing at the point of contact for participation and universal well-being. The present study reconsidered the meaning and value of parks from perspective of them as a provider of welfare benefits as well as examined how the welfare ideology of parks is connected to practice. By doing so, this study discovered the various roles, values, and ideology that parks should bear in the future. Therefore, this study is expected to be a good example for future research related to the topic.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• The Journal of Internal Korean Medicine
• /
• v.18 no.2
• /
• pp.268-295
• /
• 1997

Sweating is natural phenomenon necessary for the regulation of an individual's body-temperature. The secretion of sweat is mediated by a portion of our vegetative nervous system(the sympathetic nervous system). In some people, this system is working at a very high activity level, far higher than needed to keep a constant temperature. This condition is referred to as hyperhidrosis. Especially excessive sweating of the hands and the feet is palmoplantar hyperhidrosis or volar hyperhidrosis. This is by far the most distressing condition. It was founded that the first important cause of this was emotional factor. The hands are much more exposed in social and prefessional activities than any other part of our body. Many individuals with palmoplantar hyperhidrosis are limited in their choice of proffession, because unable to manipulate materials sensitive to humidity or reluctant to shake hands; some patients arrive to the point to avoid social contact. The occidental medical treatments for palmoplantar hyperhidrosis include application of topical agents(chemical antiperspirants such as aluminum chloride), iontophoresis(treatment with electrical current), or surgery(thoracic sympathectomy). It was reported that the most effective treatment was thoracic sympathectomy. So this study was started to find the easy and effective oriental medical treatments against the occidental medical treatments through the oriental medical literature. The occidental medical idea for palmoplantar hyperhidrosis is only limited in neurologic system, so surgery is the best treatment. But the oriental medical idea for palmoplantar hyperhidrosis is much wider, so the oriental medical causes and treatments for this are able to be veriety. And the oriental medical teatment is freely in treating the patients of palmoplantar hyperhidrosis, because entire idea including pulse, facial color, mental condition, constitution and other symptom exists in the oriental medicine. The results of a bibliographic study of causes and treatments for palmoplantar are as follows; 1. The main causes of pa1moplantar hyperhidrosis are heat in the stomach, damp-heat in the spleen and the stomach, insufficiency of the spleen-qi and the stomach-qi, deficiency of the spleen-yin and the stomach-yin, and the others are the stomach-cold syndrome, stasis of blood and dyspepsia in the stomach, disorder of the liver-qi, deficiency of the heart-yin and the kidney-yin, deficiency of the heart-yang and the kidney-yang, stagnated heat in the liver and the spleen, the lung channel-heat etc. 2. The main methods of medical treatments for palmoplantar hyperhidrosis are clearing out the stomach-heat, eliminating dampness and heat in the spleen and the stomach, invigorating the spleen-qi and the stomach-qi, reinforcing the spleen-yin and the stomach-yin, warming the stomach, relaxing the liver and alleviating of mental depression and tonifying the heart and the kidney etc. 3. The main prescriptions of palmoplantar hyperhidrosis are Taesihotang, Palmultang-kakam, Samyeongbaechusan, Chongbisan, Sasammaekmundongtang, the others are Leejungtang, Hwangkikonjungtang, Seungkitang, Boyumtang, Baekhotang, Chongsimyonjayum, Moyrosan, etc. 4. Local medicine for external use are liquid after boiling alum in water for about 1 or 2 hours, liquid after boiling alum and pueraria root in water and liquid after boiling stragalus root, pueraria root, ledebouriella root and schizonepeta in water, etc. 5. The methods of acupuncture therapy include invigorating Bokyru, Yumkuk and purgating Hapkouk, or invigorating Bokyru, Kihae and purgating Hapkouk, or steadying Hapkouk, Nokung.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.4
• /
• pp.357-368
• /
• 2003

Time-series CTDT (Conductivity/Temperature/Depth/Transmissivity) were obtained at one point near tidewater glacier of Marian Cove (King George Islands, Antarctica) to present water column properties and SPM (suspended particulate matter) dispersal pattern in relation with tide, current, meteorological data, and SPM concentration. Four layers were divided from the water column characteristics measured in the interval of an hour for about 2 days: 1) cold, fresh, and turbid surface mixed layer between 0-20 m in water depth, 2) warm, saline, and relatively clean Maxwell Bay inflow between 20-40 m in water depth, 3) turbid/cold tongue of subglacial discharges compared with the ambient waters between 40-70 m in water depth, and 4) cold, saline, and clean bottom water beneath 70 m in water depth. Surface plume, turbid freshwater at coastal/cliff area in late summer (early February), had the characteristic temperature and SPM concentration according to morphology, glacial condition, and composition of sediments. The restrict dispersion only over the input source of meltwater discharges was due to calm wether condition. Due to strong wind-induced surface turbulence, fresh and turbid surface plume, englacial upwelling cold water, glacier-contact meltwater, and Maxwell Bay inflow was mixing at ice-proximal zone and the consequent mixed layer deepened at the surface. Large amount of precipitation, the major controlling factor for increasing short-term glacial discharges, was accompanied by the apparent development of subglacial discharge that resulted in the rapid drop of salinity below the mid depth. Although amount of subglacial discharge and englacial upwelling may be large, however, their low SPM concentration would have small influence on bottom deposition of terrigenous sediments.

• Korea journal of population studies
• /
• v.11 no.2
• /
• pp.33-53
• /
• 1988

This study aimed at developing a desirable family planning policy and strategy by examining the current status of family planning practice in rural Korea and by indentifying the crucial factors which affect fertility control behavior. For this purpose, an analytical study was conducted, using the survey data collected in July 1985, on an interview basis, on 1, 440 married women living in the Soyi, Wonnam and Maingdong townships of Eumseong County(in North Chungcheong Province). This study population has the typical characteristics of rural areas, and the results of the analysis can be summarized as follows: 1. In regard to the demographic characteristics of the study population : their average age at marriage was 23.7, they had an average of 2.6 children( 1.3 boys, 1.3 girls) :10% experienced the death of their child (ren) :14% had spontaneous abortion(s) :4% weathered stillbirth(s) :35% went through induced abortion (s) : and 5.5% were currently pregnant. The average of their ideal numbers of children was 2.2, while 44% felt that they must have a son. 2. Looking at the contact rate with medical & health institutions, over the past 1 year, the visit rate to health subcenters was 43.7%, while 26.9% visited the (county) health center :59.6% had been to private clinics : and 41.5% went to the Soonchunhyang - Eumsung hospital : thus showing a relatively high rate of accessibility. 3. The utilization rate of family planning services was 76.5%, with tubectomy being the most prominent method at 52.3%, while the informants were health workers in 54.2% of the acceptors. Of the 8.4% who discontinued the use of contraceptive methods, only 26% did so due to want for pregnancy, natural infertility (meno - pause), or other reasons, while the remaining 74% stopped usage on account of side effects, failure in the methods themselves, and inconvenience of use, thus pointing to a situation where the proper choice of family planning methods have not yet been made. It can be noted that there is a strong motivation for early birth stopping as 35.3% practice family planning even with only one child, of which 38.3% have had sterilization operations. According to results of a multiple regression analysis, among the variables affecting contraception usage the most significant variable was the number of sons. 4. 34.8% experienced induced abortions. It was shown as a result of multiple regression analysis that the number of children and attitudes toward induced abortions extensively affected their frequency of abortions conducted. 5. In the regard to the relation between family planning and induced abortions, 33.7% of the women used both, while 52.0% of them used only the former(family planning), with only 1.4 % utilizing solely the latter(abortion), and 12.9% totally abstaining from fertility regulation : again, the discriminant analysis indicated that the choice of family planning and/or induced abortion was determined by the number of children and attitudes toward induced abortion. In view of the above mentioned results, the following are some comments and suggestions concerning problems related to the current family planning policies, in Korea : 1. It is difficult to expect a further quantitative expansion in family planning program operations, as there has been an excessive supply of target-oriented sterilization operations on women. From a maternal and child health care point of view, it will be desirable to have a diversification of service points in the future where family planning methods may be properly chosen, so that choices of methods which suit the mothers' characteristics and tastes may be made by the individuals themselves by strengthening their quality of family planning information services. 2. Along with the strengthening of the qualitative improvement of family planning services policies must be implemented to effectively promote the moral (ethical) deterrents to induced abortions and to preference for sons. From a maternal care standpoint, the social permissive norm toward induced abortion must be modified, and the bias towards son must be analyzed as the women with more daughters have a lower rate of family planning acceptance. Such changes in attitudes, however, can not be hoped to be accomplished with ad hoc policies, but will only be possible when an enhancement of the women's status(within the society) is brought about in a long - term perspective.

• Knowledge Management Research
• /
• v.22 no.3
• /
• pp.273-293
• /
• 2021

Due to the COVID-19 pandemic, the size of the e-commerce has been increased rapidly. This pandemic, which made contact-less communication culture in everyday life made the e-commerce market to be opened even to the consumers who would hesitate to purchase and pay by electronic device without any personal contacts and seeing or touching the real products. Consumers who have experienced the easy access and convenience of the online purchase would continue to take those advantages even after the pandemic. During this time of transformation, however, the size of information source for the consumers has become even shrunk into a flat screen and limited to visual only. To provide differentiated and competitive information on products, companies are adopting AR/VR and steaming technologies but the reviews from the honest users need to be recognized as important in that it is regarded as strong as the well refined product information provided by marketing professionals of the company and companies may obtain useful insight for product development, marketing and sales strategies. Then from the consumer's point of view, if the ratings of reviews are widely diverged how consumers would process the review information before purchase? Are non-converged ratings always unreliable and worthless? In this study, we analyzed how consumer's regulatory focus moderate the attitude to process the diverged information. This experiment was designed as a 2x2 factorial study to see how the variance of product review ratings (high vs. low) for cosmetics affects product attitudes by the consumers' regulatory focus (prevention focus vs. improvement focus). As a result of the study, it was found that prevention-focused consumers showed high product attitude when the review variance was low, whereas promotion-focused consumers showed high product attitude when the review variance was high. With such a study, this thesis can explain that even if a product with exactly the same average rating, the converged or diverged review can be interpreted differently by customer's regulatory focus. This paper has a theoretical contribution to elucidate the mechanism of consumer's information process when the information is not converged. In practice, as reviews and sales records of each product are accumulated, as an one of applied knowledge management types with big data, companies may develop and provide even reinforced customer experience by providing personalized and optimized products and review information.