• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.719-724
• /
• 2002

Impact hammer is widely used as a convenient excitation tool in structural modal testing though, little is known about the dynamic characteristics of its impulse mechanism. Transmission of the impulsive force to the structure depends m the dynamic properties of the impact hammer as well as the stiffness of the tip. In this study an improved dynamic model of the impact hammer is proposed with the consideration of structure to be tested. The deformation masses of hammer tip and structure are as well as their contact stiffness. Numerical results show that this model is useful for the prediction of the impulse duration and the condition of rebounce..

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.12 s.117
• /
• pp.1208-1214
• /
• 2006

ATM(automated-teller machine) is a machine that receives and pays money directly. The double bill detector(DBD) module of an ATM detects double bills from its thickness. In this paper, the dynamic behavior of the DBD was analyzed, which cannot be simulated correctly by a package program of SAMCEF. And the displacements of the lever was measured for various bills experimentally. The measured dynamic behaviors were analyzed kinematically using a vector equation and simulated dynamically by the derivation of equation of motion with consideration of damping and stiffness of the DBD and bills. The analysis showed that the spring constant of the system is not so influential, instead, the contact angle between the lever and bill needs to be larger than the existing DBD in order to be laster and reliable DBD.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.634-642
• /
• 1998

This paper deals with the analytical model of an elastic porous material in sound transmission loss of a double panel with fiber glasses. From the parametric analysis, it is concluded that the boundary condition, which is concerned to the contact between the skin panel and core materials, does not have much influence on sound transmission loss of a double panel with fiber glasses, and material properties of the porous material become, however, important factors to mass-spring-mass resonance. The comparisons of the prediction with the measurement of sound transmission loss of walls show good agreement between the two values.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.45-50
• /
• 1998

The coupled vibration occurs between traveling vehicle and bridge, when vehicle runs on it. The natural frequency of this coupled system is dependent on the contact position of vehicle and bridge, that is, time-varying system. The calculations of these natural frequencies are very complicated, and often carried out by using Green function theory, series. But, these methods have any limitations, such as, supporting condition, boundary condition. In this paper, on the coupled system constructed by the concentrated mass and elastically supported beam, an analytical method of natural frequency is proposed by using Fourier sine transformation. The results are compared and discussed with numerically calculated ones.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.4 s.121
• /
• pp.317-323
• /
• 2007

Non-contact underwater explosions against surface ships could cause extensive equipment damage and render the ship inoperative. As an analytical method, DDAM(dynamic design and analysis method) is used for ship shock design. In this paper, in order to verify the finite element model of large shipboard equipment, modal test of equipment was performed. Major objective of this paper is to describe shock analysis methodology for large shipboard equipment attacked to the top and bottom foundations.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.9
• /
• pp.716-723
• /
• 2014

Vibration measurement using image processing is a fully non-contact measurement method and has many application fields. The resolution of vibration data measured by image processing depends on the camera performance and is lower than that measured by accelerometers. This work discusses the method to increase resolution of vibration signal measured by image processing based on the image mosaic technique with a high-power lens. The working principle of resolution enhancement was explained theoretically and verified by several experiments. It was shown that the proposed method can measure vibrations of relatively large scale structures with increased resolutions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.347-352
• /
• 1998

An analytical method for evaluating the free vibration of two circular plates coupled with water was developed by assuming the clamped boundary condition of the plates and an ideal fluid. The method was applied to analyze the transverse vibration modes, in-phase and out-of-phase, and the results were compared to those obtained by the finite element method (FEM) using a commercial ANSYS 5.2 software. It was found that the theoretical results can predict well the coupled natural frequencies for all in-phase modes with good accuracy. However, the analytical method shows some discrepancies compared with FEM analysis in predicting the coupled natural frequency of the out-of-phase modes, except when m = 0, the zero nodal circle. The analytical method also applied to evaluate the characteristics of the natural frequency with respect to the major parametric variation in mode numbers and distance between the circular plates.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.238-243
• /
• 1994

본 논문에서는 여러가지 형태의 결합부에 적용할 수 있는 일반적인 모델링 기법에 대하여 기술하였다. 기존의 해석방법은 특정한 결합부에만 적용이 가능하고 유한요소해석과 실험이 상호 보완적인 관계를 가진 형태의 해석방법이므로 실험이 불가능한 경우에 대해서는 적용하기 어려운 경우도 있다. 본 논문에서는 별도의 실험을 수행하지 않고 결합부 영역만을 상세하게 유한요소 모델링을 하여서 선택된 자유도에 대한 유연성 행렬(Flexibility Matrix)을 구하여 결합부의 특성을 구하는 일반적 모델링 기법을 제시하였다. 이 방법은 수치적으로 축약할 수 없는 모델-결합부가 접촉면(Contact Surface)을 가지고 있는 구조물을 효과적으로 축약할 수 있는 장점이 있다. 또한 모델링되는 결합부의 경계조건의 영향을 배제할 수 있으며 결합부에 존재하는 비선형성도 적정범위내에서 선형화할 수 있다. 제시한 일반적 모델링 기법을 나사 결합부, 접착제 결합부(Glued Joints), 볼트 결합부에 적용하여 결합부이 특성을 구하였으며 실험을 통하여 제시한 해석방법의 타당성을 검증하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.3 s.96
• /
• pp.329-333
• /
• 2005

This paper is concerned with the measurement of low-frequency vibrations of structures using the image processing method. To measure the vibrations visually, the measurement system consists of a camera, an image grabber board, and a computer. The specific target installed on the structure is used to calculate the vibration of structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the size of image. In this paper, we propose the methodology for the vibration measurement using the image processing method. The method enables us to measure the displacement directly without any contact. The current resolution of the vibration measurement is limited to sub centimeter scale. However, the frequency bandwidth and resolution can be enhanced by a high-speed and high-resolution image processing system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.364.1-364
• /
• 2002

This work is concerned with the damage size estimation by using propagating bonging wave signals in a beam. To this end, we apply the continuous wavelet transforms to the incident waves and the reflected waves from a small damage in a long cylindrical beam. In particular, we propose to use the relative magnitudes of the two kinds of waves along the ridges in the wavelet transformed time-frequency planes. (omitted)