• 대한기계학회논문집B
• /
• 제34권6호
• /
• pp.569-577
• /
• 2010

다상 유체 시스템에 적용할 수 있는 다중스케일 입자 시뮬레이션 기법을 개발하였다. 거시 모델과 미시모델이 만나는 경계영역에서 세가지로 구별되는 기능을 수행하도록 하였다. 먼저, 기상과 액상을 분리하여 연결하기 위해 벽을 설정하였다. 또 경계영역을 근처에서 경계의 위치를 측정하고 이것에 벽의 각도와 위치가 연동하여 접촉각 값을 미시모델에서 거시모델로 전달하게 하였다. 마지막으로, 입자의 삽입과 제거를 통해 경계영역의 질량과 온도를 거시적 조건에 맞추도록 하였다. 이 알고리즘들을 적용한 완전습윤과 부분습윤시스템들은 좋은 결합 결과를 보였다.

• 한국기계가공학회지
• /
• 제15권3호
• /
• pp.115-121
• /
• 2016

A mackerel grader is a machine for sorting mackerel according to size. In this study, the dynamic deflection and optimal sorting simulation of a mackerel grader was carried out by using multi-body dynamics. To analyze the dynamic deflection of the roller, RecurDyn, a multi-body dynamics analysis program, was used. The dynamic deflection of the roller pipe was analyzed according to the inclination of the roller pipe. When the inclination of the roller pipe was 30 degrees, the roller indicated the maximum deflection of about 6.3 mm at the center of the mass. To simulate the mackerel sorting, the mackerel grader machine was modeled, and the contact simulation between the mackerel model and the rotating roller pipe was carried out. When the inclination of the roller frame was 7 degrees, the mackerel grader indicated optimal sorting performance.

• 태양에너지
• /
• 제12권1호
• /
• pp.48-58
• /
• 1992

온도가 일정한 외벽을 열원으로 하는 수직 원통형 용기내에 채워진 물질(PCM)의 내향용융 과정에서 용기의 경사각의 변화에 따른 상변화 물질 내의 온도 분포, 용융율, 용융 에너지 등을 실험적으로 연구, 분석하였다. 상변화 물질로는 용융점 온도가 $42.5^{\circ}C$인 n-docosane paraffin($C_{22}H_{46}$)을 사용하였다. 수직 원통형 용기내에서 PCM 용융의 열전달 기구는 자연 대류에 의한 용융이 지배적인 반면 경사진 용기 내에서 용융은 자연 대류 및 고상 PCM과 용기 벽면의 직접 접촉에 의한 조합된 열전달 현상으로 나타났으며, 경사진 용기 내에서 파라핀의 용융율 및 용융에너지는 동일 온도 조건에서 수직 원통형 용기에서 보다 높은 값을 나타내었다.

• 방사성폐기물학회지
• /
• 제3권3호
• /
• pp.177-181
• /
• 2005

칼슘-벤토나이트와 접한 약 $20\%$의 우라늄 산화물을 함유한 유리고화체가 알곤 분위기에서 모의 화강암지하수에 의해 침출되었을 때 노란색의 우라늄화합물이 벤토나이트와 고화체의 경계면에 농축되었다. 6년간의 침출후 형성된 우라늄 화합물이 beta-uranophane $[Ca(UO_2)_2(SiO_{3}OH)_{2}5H_{2}O]$임을 XRD, 적외선 스펙트럼과 질량분석기를 이용하여 확인하였으며, 이 화합물의 용해도를 $80^{\circ}C$, 탈이온수에서 측정한 결과 약 $10^{-6}\;mole/L$ 이었다.

• Elastomers and Composites
• /
• 제34권5호
• /
• pp.407-413
• /
• 1999

비세라믹 복합절연소재는 기계적 물성, 환경문제, 대량생산과 용이한 설계등의 우수한 특성으로 인해 전력산업분야에서 관심의 대상이 되어왔다. 또한 세라믹 절연체에 비하여 가볍고, 더욱 강인한 물성을 가진다는 장점이 있다. 본 연구에서는 뛰어난 전기 절연 특성과 우수한 내열, 내산화, 내오존성과 내후성을 가진 ethylene propylene diene monomer(EPDM)를 절연소재로 사용하였다. 특히, EPDM은 다른 고무 복합체에 비해 우수한 소수성을 가지기 때문에 장기간 사용이 가능하다는 점에서 본 연구에서는 EPDM 복합체의 유변학적 물성, 전기적물성, 그리고 접촉각의 측정을 통한 소수성 및 회복력에 관한 연구를 하였다. 또한 SEM을 사용하여 표면 형태학적 연구를 수행하였다.

• Selected Papers of The Society of Naval Architects of Korea
• /
• 제2권1호
• /
• pp.18-28
• /
• 1994

In the vibration analysis of submerged or floating bodies such as ships and offshore structures, the coupled system between fluid and structure should be considered using the compatibility conditions on the wetted surface. It is well known that the hydroelastic vibration analysis of structures in contact with fluid can be done by applying the finite element method(FEM) to structures and the boundary element method(BEM) to the fluid domain. However, such an approach is impractical due to the characteristics of the fully coupled added mass matrix of fluid on the entire wetted surface. To overcome this difficulty, an efficient approach based on a reanalysis scheme is proposed in this paper. The proposed method can be applied for cases of higher local modes and beam-like modes for which three-dimensional reduction factors are not known. The three dimensional reduction factors are not needled and thus the restrictions can be removed in the analyses of non-beam like modes or local vibration modes by considering fluid-structure interaction. The validity and calculation efficiency of the proposed method are proved through numerical examples.

• 대한전자공학회논문지
• /
• 제10권3호
• /
• pp.1-9
• /
• 1973

파일롯트 램프와 숫자표시를 목적으로 국내에서 처음으로 화합물반도체인 갈륨 인을 사용해서 발광다이오드를 만들었다. 이같이 만든 다이오드는 밝고 선명한 붉은 빛을 냈으며 발광하는데 필요한 순방향 바이아스 전류는 5mA 이하였다. 다이오드의 p-n 접합면은 n형 GaP 단결정 기판에 liquid phase epitaxy방법으로 성장시켰고 이때의 Ga 용액의 온도는 약 1300°K정도를 유지했다. 이렇게 하여 제조된 p-n 접합체에 wire bonding으로 ohmic contact시켜 다이오드를 제조했다. 칼륨인 발광다이오드는 매우 적은 전류로 발광되는 장점과 성장 반웅시 질소를 불순물로 doping시키면 녹색으로 발광되는 장점을 갖고 있으므로 앞으로 양산화의 전망이 매우 밝다.

• 한국전산유체공학회지
• /
• 제17권1호
• /
• pp.8-15
• /
• 2012

A code developed using the flux-difference splitting scheme on the hybrid Cartesian/immersed boundary method is applied to simulate three-dimensional internal waves. The material interface is regarded as a moving contact discontinuity and is captured on the basis of mass conservation without any additional treatment across the interface. Inviscid fluxes are estimated using the flux-difference splitting scheme for incompressible fluids of different density. The hybrid Cartesian/immersed boundary method is used to enforce the boundary condition for a moving three-dimensional body. Immersed boundary nodes are identified within an instantaneous fluid domain on the basis of edges crossing a boundary. The dependent variables are reconstructed at the immersed boundary nodes along local normal lines to provide the boundary condition for a discretized flow problem. The internal waves are simulated, which are generated by an pitching ellipsoid near an material interface. The effects of density ratio and location of the ellipsoid on internal waves are compared.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제11권sup1호
• /
• pp.38-43
• /
• 2008

Enterobiasis and head lice infestations, contact-borne parasitic diseases, are the most prevalent parasitic infections of children in Korea, and they are transmitted by close contact with infected persons. They are not of major concern in public health, therefore their importance in children's health care are overlooked in Korea. Egg positive rates of Enterobius vermicularis have been reported to be 10~20% among children in kindergartens and primary schools. Enterobiasis is diagnosed by scotch tape anal swab, but repeated examination is necessary for accurate diagnosis. Albendazole or mebendazole are extremely effective for treatment, however, reinfections usually occur if treatment is not repeated at least three times at a 3-week-interval, targeting the whole family members including the patients. Environmental sanitation and health education are also necessary to guarantee the successful treatment of enterobiasis. Head lice infestation is still an indication of public health status. Children of 3 to 12 years old and their families have infestations more frequently, and girls have more than boys. Diagnosis can be made by identification of live lice or nits on the head. Pediculicides are effective treatment of infestations, however they do not kill nits completely, requiring second treatment. Recently wet combing is preferred as an alternative by parents in England because of possible toxicity of drugs and resistance of lice. It is impossible to completely prevent enterobiasis and/or head lice infestations. Therefore, mass screening and prevention are required, and, in local clinics, a thorough evaluation of the symptoms and past history, and appropriate laboratory tests are necessary.

• Structural Engineering and Mechanics
• /
• 제46권6호
• /
• pp.869-886
• /
• 2013

This work presents an experimental methodology specially developed for the nonlinear large-amplitude free vibration analysis of a clamped-free thin-walled metal column under self-weight. The main contribution of this paper is related to the developed experimental methodology which is based on a remote sensing technique using a computer vision system that integrates, on-line, the digital image acquisition and its treatment through special image processing routines. The main importance of this methodology is that it performs large deflections measurements without making contact with the structure and thus, not introducing undesirable changes in its behavior, for instance, appreciable changes in mass and stiffness properties. This structure presents, in most cases, highly non-linear responses, which cannot be reproduced by conventional finite-element softwares due, mainly, to the simultaneous influence of geometric and inertial non-linearities. To capture the non-linearities associated with large amplitude vibration and be able to describe the buckling process, the structure is discretized as a sequence of jointed coupled elastic pendulums. The obtained numerical results are favorably compared with the experimental ones, in the pre- and post-buckling regimes.