• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.5
• /
• pp.751-760
• /
• 2018

Currently, the quality measurement of the work is carried out by the supervisor's visual inspection, as the workers individually judge the number of resolutions, thickness, speed and vibration. After work, we are conducting follow-up work through traditional spot test, which is less representative. Therefore, it is impossible to check the results of the resolution, and there is always the possibility that problems will arise due to poor construction. This study demonstrates the feasibility of using the continuous compaction strength measurement method by comparing the continuous compaction strength measurement method and the conventional compaction strength measurement method after performing the compaction in the actual field scale in various test conditions. The validity is verified by analyzing the Compaction Meter Value of an Intelligent Compaction roller composed of a Global Positioning System and an accelerometer, Based on the proven results, a full range of quality can be confirmed without a single test. The quality confirmation is visualized in the compaction control program developed in this study, This enables the field manager to perform real-time quality monitoring at the same time as compaction.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.289-296
• /
• 2014

The rebar detailing is an important work influencing the final performance and quality of RC structures. But it is one of the most irrational and illogical activity in construction site. Many groups of workers, including main contractors, structural engineers, shop drawers, rebar fabricators, and etc., participate in this activity. A loosely-organized process for this activity is apt to produce a big amount of rebar loss or even degraded structures. A 3-dimensional rebar auto-placing system, called as Rebar Hub, has been designed and implemented in this research. Rebar Hub provides a totally integrated service from 3D structural modeling of buildings to rebar auto-placing considering anchorage, splice, and the length of ordered rebar. In addition, Rebar Hub can recognize the 2D drawing CAD files and then build 3D structural models which are used for the start point of 3D rebar auto-placing. After rebar auto-placing, each members of the 3D structural model have rebar information belonging to them. It means that the rebar information can be used for the afterward works such as quantity-survey, manufacturing and fabrication of rebars. Rebar Hub is showing outstanding performance while applying to practical projects. It has almost five times productivity and reduces the rebar loss up to 3~8% of the initially-surveyed amount of rebar.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.3
• /
• pp.30-40
• /
• 1992

The area of grassland established and the arable land in forage production have been decreased recently in Korea. As a result, forages available from the grassland and the arable land provided only 40% of the total roughage consumed by cattle in 1991, compared with 54% in 1989. The decreasing trend of the forage production has been impinged on by a number of legislative. socio-economic. technical and other constraints negatively affecting grassland and forage development. Consequently. effective systems and strategies are quite necessary to have sustainable grassland farming in Korea. In spring and autumn, temperatures are too low for subtropical forage crops, and the summer monsoon climate is another serious limitation to the use of cool-season species. Therefore it is an imperative that not only the research-based grassland development but also the forage crop production should be strongly supported by the government authorities to overcome such climatic limitations. Private forest land holdings are of relatively small units in Korea. Accordingly. it is necessary and important to enlarge the forest land holdings per farm to develop as economic units of grassland. For this the government should introduce new policy measures such as for example: long-term leases of Sorest land and the idle arable land of absentee owners ; rational rental system of national and public forest lands; integrating livestock and forest production. All the laws and regulations standing in the way of the grassland development in forest lands should be modified and revised to open the way for much easier development of grassland. It is also proposed that a high level of financial incentives -hould be provided for structural improvements for the grassland development. They may be: mechanization facilitation, construction of new roads relating to grassland, and land exchange and consolidation. And it is basically necessary that financial enumeration or profits must be garanteed in order to motivate farmers to keep up farming continuously. For more efficient grassland development in mountainous areas, reorganization of Alpine Experiment Station and NAB1 Namwon Branch Station may be needed. Research should be strengthened for completion of pasture mixtures, development of maximum forage production methods with a view to saving labor and reducing production costs, introduction of grazing and forage conservation techniques. and utilization of rice straw as more palatable and nutritious forage source. In order to have more efficient and effective transfer of advanced forage production technologies to livestock farmers the user-clients. it is also essential that special training measures should be given to livestock farmers through making greater use of specialized research and extension workers.

• Journal of Environmental Health Sciences
• /
• v.36 no.5
• /
• pp.391-401
• /
• 2010

A reduction in risk of occupational exposure to chemical hazards within the workplace has been the focus of attention both through industry initiatives and legislation. The aims of this study were to develop an exposure matrix by industry and process, and to apply this matrix to control the risk of occupational exposure to Dichloromethane (DCM). The exposure matrix is a tool to convert information on industry and process into information on occupational risk. The exposure matrix comprised industries and processes involving DCM, based on an exposure database provided by KOSHA (the Korean Occupational Safety and Health Agency), which was gathered from a workplace hazards evaluation program in Korea. The risk assessment of the exposure matrix was performed using Hallmark risk assessment tool. The results of the risk assessment were indicated by a Danger Value (DV) calculated from the combination of hazard rating (HR), duration of use rating (DUR), and risk probability rating (RPR) of exposure to the chemical, and were divided into four control bands which were related to control measures. The applicability of the risk assessment of the exposure matrix was evaluated by a field study, and survey of the employees of the exposure matrix groups. Among 45 industries examined, this study found that greater attention should be paid to two industries: the manufacture of other optical instruments and photographic equipment, and the manufacture of printing ink, and to one process among 47 examined, the packing process in the manufacture of printing ink, because these were regarded as carrying the highest risk. This tool of a risk assessment for the exposure matrix can be applied as a general exposure information system for hazard control, risk quantification, setting the occupational exposure limit, and hazard surveillance. The exposure matrix includes workforce data, and it provides information on the numbers of exposed workers in Korea by agent, occupation, and level of exposure and risk.

• Korean Security Journal
• /
• no.57
• /
• pp.137-156
• /
• 2018

The purpose of this study is to analyze the current status of counter terrorism system and to identify the causes of problems and to suggest alternatives by selecting legal and operational sectors based on theories of open systems and integrated systems. According to the results of the research, first, the degree of agreement on the open system and the integrated system is low with regard to the characteristics of the counter-terrorism system. Second, in relation to the importance and necessity of major factors of construction and operation of counter-terrorism system, counter-terrorism workers recognize that it is the most important and necessary. In the case of strengthening international cooperative system, the difference of recognition between importance and necessity was the biggest. The importance and necessity of reviewing the Anti-Terrorism Act for the protection of the public and public safety were relatively low, and the cooperation with the private sector showed the lowest importance and necessity. In the case of academic achievement, the average level of high school graduates is higher than that of professional high school graduates. Therefore, this research concludes that counter terrorism operation system with open and integrated system has to be applied to national counter terrorism operation structure in South Korea in increasing the quality and efficiency of nation counter terrorism response capability.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.1-7
• /
• 2019

This study analyzed the effects of labor aging on labor productivity using panel statistics of 16 local governments from 1995 to 2017. The aging of the labor force, defined as the proportion of workers aged 60 or older in total employment, in the results of the panel regression analysis considering regional fixed effects and various adjustment variables, has a very consistent and significant negative effect on labor productivity. For every 1% increase in aging, labor productivity decreases by about 0.14 ~ 0.20%. In addition, the per capita capital stock and human capital considered as adjustment variables contributed to the increase of labor productivity, and the unemployment rate, which is a proxy variable of the economic fluctuation, has a significant negative effect on labor productivity as expected. The coefficient of the industrial structure, which represents the share of the service industry in the whole industry, was positive, but is not significant. The results of this study suggest that the design and construction of economic and educational policies that can maintain and expand human capital are necessary to curb the reduction in labor productivity expected by the aging workforce.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.51-57
• /
• 2019

A plant layout problem has a large impact on the overall construction cost of a plant. When determining a plant layout, various constraints associating with safety, environment, sufficient maintenance area, passages for workers, etc have to be considered together. In general plant layout problems, the main goal is to minimize the length of piping connecting equipments as satisfying various constraints. Since the process may suffer from the heat and friction loss, the piping length between equipments should be shorter. This problem can be represented by the mathematical formulation and the optimal solutions can be investigated by an optimization solver. General researches have overlooked many constraints such as maintenance spaces and safety distances between equipments. And, previous researches have tested benchmark processes. What the lack of general researches is that there is no realistic comparison. In this study, the plant layout of a real industrial C3MR (Propane precooling Mixed Refrigerant) process is studied. A MILP (Mixed Integer Linear Programming) including various constraints is developed. To avoid the violation of constraints, penalty functions are introduced. However, conventional optimization solvers handling the derivatives of an objective functions can not solve this problem due to the complexities of equations. Therefore, the PSO (Particle Swarm Optimization), which investigate an optimal solutions without differential equations, is selected to solve this problem. The results show that a proposed method contributes to saving the capital expenditures.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.249-257
• /
• 2018

The number of deaths for railway traffic accidents is mainly caused by working close to the track, or when unauthorized passage pass through the track. The safety fences are being used to ensure safety for workers close to the track, and to improve the efficiency of the work, without interfering with the passage of trains. However, a safety fence for railway tracks needs to be examined to see if it will interfere with the passage of trains. The purpose of this study is to analyze the safe distance between train and safety fence developed in Korea. In addition, the lateral load condition of wind pressure by trains is estimated and numerical analysis is carried out according to the installation intervals of railway safety fences. It has been confirmed that the proper spacing between the train and the railway safety fence should be at least 200 mm from the vehicle limit, and that the proper spacing of railway safety fence must be calculated in consideration of the wind pressure by trains.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.200-210
• /
• 2020

The maintenance of educational facilities was assembled in 12 project classifications of the Educational Improvement Program. The priorities were decided by the evaluation scores derived from the condition investigation, and maintenance works were budgeted in the order of priorities. These priorities were a schedule for conducting maintenance and an important criterion for obtaining a construction order. Several restrictions in the condition investigation exist, which derives budgets and conducts maintenance separately based on the priorities. An educational facility manager has a restriction in quantity take-off, which results in an incorrect budget. Discomfort would occur in an educational environment, and a period of infringing safety would increase. This study proposes applying a BIM in the condition investigation and the planning framework for work-type packaging. A BIM supports a budget calculation and derives evaluation scores by linking a repair and an inspection result. The work-type packaging algorithm divides a budget allocation range and derives the result of a grouped work-types applied in an equivalent space and element. As a result of applying cases, it could shorten the duration by approximately 37.4%. Its usability in selecting a grouped work-type was evaluated through an assessment with workers.

• Journal of Korea Foundry Society
• /
• v.41 no.6
• /
• pp.550-557
• /
• 2021

With the advent of the fourth industrial revolution, the interest in the internet of things (IoT) in manufacturing is growing, even at foundries. There are several types of process data that can be automatically collected at a foundry, but considerable amounts of process data are still managed based on handwriting for reasons such as the limited functions of outdated production facilities and process design based on operator know-how. In particular, despite recognizing the importance of converting process data into big data, many companies have difficulty adopting these steps willingly due to the burden of system construction costs. In this study, the field applicability of IoT-based devices was examined by manufacturing devices and applying them directly to the site of a centrifugal foundry. For the centrifugal casting process, the temperature and humidity of the working site, the molten metal temperature, and mold rotation speed were selected as process parameters to be collected. The sensors were selected in consideration of the detailed product specifications and cost required for each process parameter, and the circuit was configured using a NodeMCU board capable of wireless communication for IoT-based devices. After designing the circuit, PCB boards were prepared for each parameter, and each device was installed on site considering the working environment. After the on-site installation process, it was confirmed that the level of satisfaction with the safety of the workers and the efficiency of process management increased. Also, it is expected that it will be possible to link process data and quality data in the future, if process parameters are continuously collected. The IoT-based device designed in this study has adequate reliability at a low cast, meaning that the application of this technique can be considered as a cornerstone of data collecting at foundries.