• 한국건설관리학회논문집
• /
• 제22권6호
• /
• pp.120-130
• /
• 2021

최근 정부는 건설재해 예방을 위하여 건설공사 안전관리를 강화하고 있으며, 예방적 차원의 작업자 안전관리 방안이 중요한 실정이다. 한편 모듈러 건축은 중고층 건축물 등으로 점차 확대 적용될 예정이나, 작업환경이 열악하고 안전관리가 미흡한 중소규모 건설현장이 많아 재해예방을 위한 안전관리가 미흡한 실정이다. 또한 국내 모듈러 건축의 안전관리 방안은 작업자의 안전사고에 영향을 미치나 시공오차, 하자 등 구조안전과 관련한 요소를 관리하는 품질관리에 집중되어 있어, 작업자의 안전보건을 관리하여 재해를 예방하는 작업자 안전관리는 부족한 실정이다. 따라서 본 논문에서는 국내 연구 개발된 사례들을 분석하고 전문가 자문을 통하여 도출된 모듈러 건축의 작업자 안전관리를 위한 체크리스트의 분류체계를 제안하였다. 분류체계는 공장제작, 운송, 현장시공을 대분류로 구성하였으며, 하위체계는 현장시공의 6가지의 중분류 중 모듈러 골조설치 공사의 세부작업인 양중작업과 조립작업을 중심으로, 12가지의 단위작업을 구분하였다. 그리고 안전관리를 위한 관리요소에 따른 단위작업별 작업내용을 정의하고 분류체계에 최종적으로 반영하였다. 본 연구의 결과가 모듈러 건축의 건설현장에서 효율적인 안전관리를 수행하는데 기여할 수 있기를 기대한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.837-842
• /
• 2007

Since construction materials have been towards larger and heavier, the rate of accident associated with installation works of heavy construction materials is increasing. Installation works of heavy construction materials lead to frequent accidents, increasing the WMSDs(Work-Related Musculo-Skeletal Disorders) in construction site. In case of installation work of heavy glass ceiling, the rate of accidents such as falling and collision is increasing as well. This paper describes a ergonomic design of working platform(deck) in a glass ceiling installation robot. As well as, a design of working process is considered to accomplish an efficient installation work. As a result of the design, an installation work of heavy glass ceiling by the robot will be expected safety assurance and retrenchment of the construction cost and period.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.7-8
• /
• 2011

The use of foreign labors was inevitable at the construction site in Korea. Most construction companies are being used them in the workplace due to the cheap labor, but their work ability are insufficient as much as Korean labors. In this paper is expected to confirm the foreign labors' employment conditions and study to analyze the changing of foreign labors' work ability.

• 한국안전학회지
• /
• 제12권4호
• /
• pp.122-133
• /
• 1997

Various types of fatal accidents are increasing in Korean construction work site. Simply repeated and conventional accidents as well as new types of potential hazards which are caused by large-scaled work, complexity and negligence of temporary structures in construction are increasing, so that analysis of fundamental causes are necessary to control the construction accidents. In this study 739 fatal accidents are informally classified by the types of work and work process. The classified items which are based on ANSI Z 16.2, are modified adapted to the construction fields and are given code numbers and are analyzed by the data-base program. The exact causes of various types of accidents are analyzed by the accident types, agencies and hazardous conditions and through the Cross-tabulation method in order to find out the cause between relevant accidents.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.133-139
• /
• 2008

Productivity is an important factor of the construction's success and growth. However, compared to the other industries, the study of productivity in the construction industry is still insufficient. Even though the Cast-in-Place piles work is also important in construction process, the research on the productivity is not enough. So, it is necessary for the systematic research on the productivity of Cast-In-Place Piles Work. Therefore, the purpose of the study is to classify lower productivity's cause and find a way to improve these situations. This study will give the checklist for the further study of factoring and improvement of the Cast-in-Place piles work productivity.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.58-59
• /
• 2016

Along with the logistics development, heavy-loaded warehouses and sales facilities tend to be bigger and designed as a PC structures. PC erection work of heavy-loaded structures is influenced by various factors, including the required construction duration, site and surrounding situations, safety, PC member procurement, equipment rental cost, which ultimately impact the construction cost. It requires creative efforts and a lot of time when preparing an erection plan in consideration of these factors, and the plan prepared has a great influence on safety as well as the construction duration and cost. However, many engineers do not have enough experiences on PC erection work of heavy-loaded, long span structures, making it difficult for them to set erection plans and establish simulations. The study's results will provide a knowledge to obtain a solution for engineers to establish PC erection plans of heavy-loaded, long span structures.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.232-233
• /
• 2019

The plater work in the standard of estimate presents a variety of construction types. However, there is a part that does not fit the change of specification standards and on-site construction status, and it was revised in 2019's standard of estimate. In this study, we analyzed in detail the factors affecting the changes in estimating standards in the plater work. There were changes in the specification standards previously presented as primary coat, secondary coat, and formal coat as well as changes in on-site construction status such as thickness according to the number of plastering. Therefore, it is analyzed that the estimating standards can be classified by the number of finishes according to the site conditions by reflecting the analysis of the specification standards and site application status, and suggesting the finishing standards according to the number of plastering.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.600-601
• /
• 2015

Both the importance and process of estimating Nuclear-power plant construction time and cost have increased in significance as energy user costs themselves have become more significant. In estimating construction time, few parameters are more significant than work item production rates and factors significantly affecting the rates. A standardized data collection tool was used to acquire a total of 401 data points from a S Nuclear-power plant project, for selected critical works: form-work, rebar-work, and concrete-pouring. With the data, several hypothesized drivers of the man-hour production rates and crew-day production rates were also analyzed. Findings from this study will enable industry professionals to enhance accuracy of time and cost estimation for nuclear power plant construction.

• 한국건설관리학회논문집
• /
• 제14권1호
• /
• pp.133-143
• /
• 2013

BIM과 건설사업관리(Construction Management; 이하 CM)는 건설정보를 통합 관리하고 신뢰성 있는 의사결정을 지원하는 수단이라는 점에서 그 성격이 유사하기 때문에 BIM은 CM에 효율적으로 활용할 수 있으나, CM 분야에서 BIM 도입은 미흡한 실정이다. 이 연구의 목적은 시공단계의 CM 업무에 BIM을 효과적으로 활용할 수 있도록 업무절차 모델 및 가이드를 제시하는 것이다. 문헌조사를 통해 BIM 기능을 BIM 전환설계, 모델 검토, 데이터 추출, 자동 견적, 4D 시뮬레이션, 도면 생성, 엔지니어링 분야 연계분석 등으로 정의하고, CM 업무와 프로세스를 분석하여 BIM의 적용이 가능한 CM 업무를 도출하였다. BIM 기능과 CM 업무 간 연관성 분석을 통해 기존의 업무절차를 BIM 기능과 연계하여 재구성하고, 사업 참여자별 역할을 재정립하여 BIM기반 CM 업무절차 모델을 개발하였다. 개발된 모델의 효용성을 향상시키고자 면담조사와 사례조사를 통해 사업 참여자들의 BIM 업무를 기술한 가이드를 작성하였다. 또한 BIM기반 CM 업무절차 모델의 활용성을 검증하기 위한 선행연구의 BIM 프로세스와 비교 분석하고 전문가를 대상으로 설문조사를 수행하였다. 이 연구는 CM 분야에서 BIM의 활용성을 높이는데 기여할 수 있다. 향후에는 사례적용을 통해 실무적 관점에서 모델을 평가할 필요가 있으며, BIM 도입으로 인한 CM 업무의 확대를 고려하여 지속적으로 BIM기반 CM 업무절차 모델을 업데이트할 필요가 있다.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.16-23
• /
• 2020

The use of construction machinery has been increasing every year due to the large scale, high-rise and lack of workers in construction work. On the other hand, deaths are on the rise every year due to inadequate risk management for construction machinery work. In addition, the number of deaths caused by the lack of signals or insufficient signals during construction machinery work is increasing rapidly, and it is deemed necessary to analyze the actual conditions and take countermeasures. Therefore this study has developed the Strength Risk Index (SRI) based on the Frequency Risk Index (FRI) and the 5W1H by analyzing in-depth deaths caused by construction machinery over the past five years. The risk index (RI) was assessed using the frequency and strength risk index derived to determine whether it is acceptable (acceptable risk < 0.25 ≦ unacceptable risk) and the risk assessment method for reducing risk was proposed by applying 3E (Engineering, Education, Enforcement) measures for each level of risk for unacceptable risk. It also proposed measures to improve the system, such as requirements for signal numbers, mandatory placement standards, and mandatory installation of side and rear monitoring cameras, as measures for accidents caused by failure to deploy signals or insufficient signals, which account for the highest proportion of deaths among construction machinery operators and workers.