• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술논문발표회
• /
• pp.31-36
• /
• 2002

Recently, more interests in surface treatment of structure with water repellent agent are steadily increased, But, investigation of its properties such as protection, durability, morphology of micro structure is not sufficient. Therefore, This paper is aimed for the investigation of water repellent property and change of morphology of micro pores in mortar that is treated by water repellent agent(Inorganic polymer based material). Water repellent property, water absorption coefficient, air permeability, porosity and the observation of micro structure was investigated in different water repellent agent type. The test results indicated that water repellent treated mortar showed low absorption coefficient and air permeability(breathing effect). This is why inorganic polymer is coated at the wall of capillary and micro pores, also, the volume of micro pore is reduced without the change of morphology in micro structure.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.224-229
• /
• 2009

Digital image recognition has been used for steel bridge surface assessment since late 1990s. However, the non-uniform illumination problems such as shades, shadows, and highlights are still challenges in image processing to date. Therefore, this paper develops a new approach to tackle the non-uniform illumination problem for rust image adjustment. The inhomogeneous illumination problem is divided into shades/shadows and highlights in this paper. The proposed BEMD-morphology approach (BMA) utilizes the bidimensional empirical mode decomposition to mitigate the shade/shadow effect, and the morphological processing to detect and replace the highlight area. Finally, the rust image processed with the BMA will be segmented by the K-Means algorithm, one of the most popular and effective methods, to show the effectiveness of illumination adjustment.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.469-474
• /
• 2003

Talus topography is that rock clasts that is weathered is accumulated dropping in steep slope to action of gravity. Rock fall talus is formed by the accumulation of rock debris falling as individual particles from a cliff. If the collapse is produced in talus slope, it will be possible the loss of manpower and country. Despite correct access about talus is required, domestic research was scientific access about talus short. The aim of the present study is to review and compare fabric data derived from rock fall talus about orientation, distribution and morphology in Sukam area. These deposits tend to have approximately equal amounts of clasts oriented parallel and perpendicular to the dip direction of the slope. And, platy-shaped clasts dominate the proximal and intermediate parts of the talus, whereas blocky-shaped clasts is more common in the distal part.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• 제2호
• /
• pp.140-146
• /
• 2004

All-round development of urban greenery network morphology is an integrated part of urban space system. The greenbelt construction of the Middle Ring Line is capable of changing linear planning and merging the peripheral greenery construction with 3-D space design to jointly form a broad open space.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.140-141
• /
• 2021

Arc thermal spray process is widely used to protect the steel from corrosion and abrasion. In the present study, two different coatings i.e. Al and Al-5%Mg were used to compare their corrosion resistance performance and the effect of 5% Mg addition in the properties of deposited coating. The SEM results showed the more compact and less porous morphology of Al-5%Mg coating compared to Al. The corrosion resistance performance of both deposited coatings was studied in artificial ocean water with exposure periods and results are compared. The total impedance values of Al-5%Mg at 0.01 Hz exhibited highest with exposure periods might be attributed to the coating and corrosion products nature and morphology compared to Al coating.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.281.1-281.1
• /
• 2013

Shape control of gold nanocrystal is still one of the most important challenges remaining to achieve geometry dependent properties. Thus far, several strategies have been developed to control the shape of nanoparticles, such as adding capping agents and diverse additives or adjusting the temperature and pH. Here, we used an already established seed-mediated method that allowed us to focus on controlling the growth stage. Cetyltrimethylammonium bromide (CTAB) and ascorbic acid (AA) were used as the ligand and the reducing agent, respectively, without using any additional additives during the growth stage. We investigated how the relative ratio of CTAB and AA concentrations could be a major determinant of nanoparticle shape over a wide concentration range of CTAB and AA. As a result, a morphology diagram was constructed experimentally that covered the growth conditions of rods, cuboctahedra, cubes, and rhombic dodecahedra. The trends in the morphology diagram emphasize the importance of the interplay between CTAB and AA. Furthermore, high-index faceted gold nanocrystal was obtained by two step seeded growth. Already synthesized cubic particles developed into hexoctahedral nanocrystal consisting of 48 identical {321} facets, which indicates that the growth of gold nanocrystal is affected by initial morphology of seed particles. The hexoctahedral gold nanoparticles can be used in catalysis and optical applications which exploiting their unique geometry. Our research can provide useful guidelines for designing various facetted geometries.

• 대한치과의사협회지
• /
• 제51권5호
• /
• pp.255-264
• /
• 2013

Many concept of occlusion have been introduced in the past, but there isn't any generally accepted unified theory since a single occlusion theory cannot represent the natural perfection, especially considering the difference in clinical experience, the dynamic occlusion, and individual diversity in mastication pattern. NAT(Naturgemasse Aufwachstechnik)/NFR((Natur Funktionsgerechte Rekonstruktion) occlusion is not just a theory on occlusion, but a clinical occlusion that can be practically applied to clinical practice by providing dynamic occlusion adjusted to the individual mastication pattern and biomechanics. This report aims to provide a guide to a clinically biomechanical occlusion through the teamwork of both the dentist and the lab technician by introducing the NAT occlusion through following: reviewing the concept of occlusion in terms of morphology, its correlation with NAT/NFR occlusion, reviewing the limitation of conventional occlusion theories, and introducing the clinical application of NAT/NFR.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.383-383
• /
• 2005

• 전자공학회논문지
• /
• 제51권10호
• /
• pp.248-255
• /
• 2014

본 논문에서는 다양한 특징점들을 이용하여 아스팔트 도로의 포트홀을 검출하는 방법을 제안한다. 포트홀 검출에서의 분할, 후보, 결정 단계 들은 특징점 들의 특성에 따라 추출된 값들에 의해 처리된다. 분할 단계에서는 히스토그램과 형태학 필터의 닫힘 연산을 이용하여 포트홀 검출을 위한 어두운 영역을 추출한다. 후보 단계에서는 포트홀 후보 영역을 정하기 위하여 크기, 밀도 등 다양한 특징점들을 이용하여 포트홀 후보 영역을 추출한다. 또한 마지막 결정 단계에서는 후보 영역과 배경 영역과의 특징점들의 비교를 통해서 후보 영역이 포트홀 여부를 판단한다. 실험 결과, 제안하는 방법이 기존 포트홀 검출 방법 보다 향상된 결과를 보이고 포트홀과 유사한 형태들과 구분하는 향상된 결과를 보인다.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1264-1272
• /
• 2016

The accurate estimation of leak rate through cracks is crucial in applying the leak before break (LBB) concept to pipeline design in nuclear power plants. Because of its importance, several programs were developed based on the several proposed flow models, and used in nuclear power industries. As the flow models were developed for a homogeneous pipe material, however, some difficulties were encountered in estimating leak rates for bimaterial pipes. In this paper, a flow model is proposed to estimate leak rate in bimaterial pipes based on the modified Henry-Fauske flow model. In the new flow model, different crack morphology parameters can be considered in two parts of a flow path. In addition, based on the proposed flow model, a program was developed to estimate leak rate for a crack with linearly varying cross-sectional area. Using the program, leak rates were calculated for through-thickness cracks with constant or linearly varying cross-sectional areas in a bimaterial pipe. The leak rate results were then compared and discussed in comparison with the results for a homogeneous pipe. The effects of the crack morphology parameters and the variation in cross-sectional area on the leak rate were examined and discussed.