• Korean Journal of Hydrosciences
• /
• v.7
• /
• pp.21-35
• /
• 1996

This Study is to develop the suitable hydrologic models for determination of the size and location of detention storage facilities to restrain stormwater runoff in urban areas. Hypothetical areas of two levels are considered to seize the hydrologic response characteristics. A one-square-kilometer ares is selected for the catchment level, and a 10-square-kilometer area consisting of 10 catchments is adapted at the watershed level as representative of urban drainage area. In this analysis, different rainfall freqyencies, land uses, drainage patte군, basin shates and detention storage policies are considered. Folw reduction effect of detention storage facilities is deduced from storage ratio and detention basin factor. A substantial saving in detention storage volumes is achieved 노두 the detention storage is planned at the watershed level rather than the catchment level. For the application of real watersheds, two watersheds in Seoul metropolitan area-Jamshil 2 and Seongnae 1-are selected on the basis of hydrologic response charactaristics. Through the regression analysis between dimensionless deterntion storage volume, dimensionless upstream area ratio and reduction rate of storage ratio, the regression equations to determine the size and location of detention storage faclities are presented.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.77-90
• /
• 1984

Results investigated backwater phenomena at Geumho river basin to get a basic data for Daegu basin area development plan are as the follows. 1. It is a A=0.35 L 1.848 (r = 0.97), the relationship between basin area and river length at Geumho river. 2. Dividing the rainfall of Geumho river basin as two parts, a first half rainfall and a second half rainfall, the amount of a first half rainfall appeared 57.5% comparison with total rainfall. 3. The maximum flood discharge appeared 12 hrs. continuous rainfall rather than 24 hrs. continuous rainfall. 4. Results investigated backwater phenomena from Geumho II bridge to chungchun appeared the rising water level of 69 cm, 55 cm, 44 cm, at section III in the starting point water level of 1.8 m, 2.4 m, 4.0 m respectively. 5. Results investigated backwater phenomena by the flood water level appeared a similar form. There was a average rising water level of 30 cm at section III. At the results of this computation, it was confirmed that section III was affected the highest backwater phenomena among the observed river reaches in Geumho river. In addition, this paper should be given a assistance to decide a economic and safe section in construction of bank of river and estuary barrage.

• International Journal of High-Rise Buildings
• /
• v.8 no.4
• /
• pp.235-253
• /
• 2019

This paper reviews shape optimization studies for tall and super-tall building design. Firstly, shape effects on aerodynamic and response characteristics are introduced and discussed. Effects of various configurations such as corner modifications, taper, setback, openings, and twists are examined. Comprehensive comparative studies on various configurations including polygon building models, and composite type building models such as corner-cut and taper, corner-cut and taper and helical, and so on, are also discussed under the conditions of the same height and volume. Aerodynamic characteristics are improved by increasing the twist angle of helical buildings and increasing the number of sides of polygon buildings, but a twist angle of $180^{\circ}$ and a number of sides of 5 (pentagon) seem to be enough. The majority of examined configurations show better aerodynamic characteristics than straight-square. In particular, composite type buildings and helical polygon buildings show significant improvement. Next, shape effects on pedestrian-level wind characteristics around tall and super-tall buildings are introduced and discussed. Corner modification buildings show significant reductions in speed-up areas. On the other hand, setback and tapered models with wider projected widths near the ground show adverse effects on pedestrian-level wind characteristics.

• Geomechanics and Engineering
• /
• v.18 no.6
• /
• pp.575-584
• /
• 2019

The groundwater level (GWL) is an important subsoil condition for the design of foundation. GWL tends to fluctuate often with seasonal variation, which may cause unexpected, additional settlements with some reductions in the safety margin of foundation. In this study, the effects of fluctuating GWL on the load carrying and settlement behavior of footing were investigated and quantified. A series of model load tests were conducted for various GWL and soil conditions using a hydraulically-controlled chamber system. Changes in load level and rising and falling GWL fluctuation cycle were considered in the tests. Settlements during GWL rise were greater than those during GWL fall. The depth of the GWL influence zone ($\underline{d}_{w,inf}$) varied in the range of 0.3 to 1.5 times footing width and became shallower as GWL continued to fluctuate. Design equations for estimating GWL-induced settlements for footings were proposed. The GWL fluctuation cycle, load level and soil density were considered in the proposed method. Changes in settlement and factor of safety with GWL fluctuation were discussed.

• The Journal of Fisheries Business Administration
• /
• v.54 no.3
• /
• pp.93-114
• /
• 2023

Around the 1980s, with government's promotion and dissemination policies for FRP (Fiberglass Reinforced Plastics) of the government as a main material of fishing boats, approximately 97% of the entire fishing boats in Korea have utilized FRP until now. Nevertheless, diverse social and environmental issues have emerged due to the susceptibility to fire and the generation of substances detrimental to human health during the construction process of FRP fishing vessels. Especially, the high disposal cost and the limitation of recycling technology in the disposal process of FRP fishing boats have elicited attention to circular economy. This research intended to grasp the management status and problems of disposed FRP fishing boats in Korea, and to assess the level of competitive advantage of FRP fishing boats' recycling technologies of FRP fishing boats based on VRIO (Value, Rarity, Imitability, Organization) analysis through domestic and foreign management policies and related recycling examples. According to the survey of 161 respondents, including the industry, stakeholders and experts related to the collection, treatment and recycling of fisheries wastes, it was revealed that FRP fishing boats' recycling technologies of FRP fishing boats are at the level of 'unused competitive advantage' that satisfied the level of value, rarity and imitability, but not the level of organization.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.6
• /
• pp.150-159
• /
• 2015

This study was conducted for the purpose of presenting basic data for calculating a more reasonable landscaping project cost in the future through the construction cost calculation ratio of scenic planting and facilities and their time series trend analysis targeting 'J' corporation, a representative Korean public institution that creates apartment complexes. This study targeted scenic planting and the facility construction costs of 37 apartment complexes in the capital area from 2004 to 2012, using statistical analysis methods such as technical analysis, correlation analysis, and regression analysis to analyze the characteristics of the time series change. The conclusion was drawn as follows. First, breaking down the cost of overall landscaping projects to scenic planting and facility construction, the ratio of the average cost of scenic planting to that of facility construction showed 56.1% to 43.9% from 2004 to 2012. Second, the costs of planting construction and facility construction both showed a fluctuation range of about ${\pm}3%$, implying relatively steady costs considering the inflation rate. Third, the landscape construction cost for each type of construction resulted in a fluctuation range from minimum ${\pm}3%$(exercise facility) to maximum ${\pm}5%$(packing facility), reflecting that among the landscaping projects, the facility construction costs tended to show relatively large fluctuations in accordance with the change of time series. Fourth, the comprehensive indication of the ratio of landscaping project costs by time series and landscaping construction type implies that the regional characteristics and positional condition of the apartment complexes were not reflected sufficiently. Fifth, the high level of correlation of landscaping construction types and landscaping construction elements imply that the entire construction costs were controlled through partial adjustment of cost components within the overall frame of construction cost. These results reveal the problems of standardized landscaping cost irrespective of user satisfaction or environmental traits such as the conditions of the apartment complexes.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.3
• /
• pp.237-245
• /
• 2016

Structural performance and durability of ultra high performance concrete could demonstrate optimal performance when unity was kept. Accordingly, it is necessary to involve the characteristics and quantitative surface treatment at the same time in order to retain oneness of Ultra-High-Performance Concrete(UHPC) according to construction joint occurrence. Therefore, this study derives a reasonable surface treatment method in a material's point of view through the shear adhesion performance evaluation according to the construction joints surface processing method as a part for securing the adhesion performance of the construction joints when casting UHPC. 180 MPa of required average strength was used for mix of UHPC and surface treatment method was set to totally 7 level that MN, GR-10-0, GR-20-0, GR-30-0, SH-30-5, SH-30-10. After the specimen were manufactured to a size of $150{\times}150{\times}150mm$, Direct shear test was performed to evaluate the shear adhesion strength. As a result, it was confirmed that the adhesion performance was improved when executing a surface treatment for the construction joint interface and standard of failure mode of specimen was over Type C. Also, It was considered that interface of cross section and depth of concavo-convex should be concerned.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.3
• /
• pp.67-77
• /
• 2012

O Having a highly reliable plan for the process and estimating an accurate construction period during the early stages of a construction project can prevent falsifying the plan and reduce the occurrence of construction delays. Moreover, it allows a succession of swift and accurate decisions to happen. The difficulty in obtaining an accurate estimate of the construction period is especially prominent in high-rise building projects because the works involved are very complicated and costly. As such, it is important that research is done to find out the impacts a reliable plan and good estimate of the construction period can bring with regards to the monthly work efficiency and success of a high-rise building project. However, due to the difference in climatic conditions at high altitude and surface level, the current way of calculating work efficiency in a typical project is inaccurate for a high-rise building project. With that, this paper aims to compute the work efficiency with height, taking into consideration the change in climatic elements at different working heights. A comparison of the results according to the climatic features of each city can also be done in this paper. According to the results calculated in work altitudes, the work efficiency in Busan falls the most. On the other hands, the work efficiency in Seoul falls the least. The reason these results are shown is the influence of wind speed at high altitude. The estimation of work efficiency at high altitude would be used for estimating construction period, feasibility studies, and selecting a city of high-rise building projects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.27-32
• /
• 2019

This study examined the mediated effects of job satisfaction and the control effects of the perceived organizational support awareness on the effects of safety awareness recognized by construction workers on unsafe acts as a way to reduce unsafe acts. To this end, 439 workers at 23 construction sites across the country received a questionnaire from July 1 to July 20, 2019 and the data were analyzed, which resulted in the following conclusions. First, the sense of safety in which construction workers are late has a direct influence on job satisfaction. Second, job satisfaction recognized by construction workers has been shown to have a direct negative effect on the anxiety act. Third, job satisfaction was influenced by the medium in relation to safety awareness and anxiety transfer act recognized by construction workers. Fourth, the adjustment effect of the perceived organizational support awareness in the relationship between safety awareness and task satisfaction was shown to be significant. This study suggests that to prevent unsafe acts at construction sites, increased safe acts reduce the level of anxiety transfer due to a high sense of safety and job satisfaction by workers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.407-416
• /
• 2020

North Korea's demand for infrastructure construction and maintenance is growing rapidly. On the other hand, the number of skilled workers is insufficient. Therefore, through a survey of North Korean defectors, this study analyzed the status of construction technology and the difficulties of construction workers. In addition, an attempt was made to derive an appropriate education and training program process and operation plan. As a result of the survey, the reason for the low technical level of construction workers was the lack of skills, lack of motivation to work, and the lack of training and management systems. The appropriate education and training period was 56% of the total response within one year and 36% within six months. Based on the results of this survey, the period of education and training for the rapid training of construction technical personnel in North Korea was adopted as one year. Moreover, compared to the NCS standard in South Korea, appropriate training hours were suggested, excluding training courses, such as planning and design, construction management that require specialized knowledge. Finally, the curriculum corresponding to the education and training courses and the standards for facility names and required areas for facility operation were suggested.