• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.100-103
• /
• 2019

'융합과 연결'이라는 4차 산업혁명으로 인하여 '고연결성 사회', '고지은성 사회'에 대한 관심이 높아지고 있으며 이에 관련한 대상은 오토메이션과 커넥티드 카등으로 국한되지 않는다. 사물인터넷은 4차 산업혁명의 주 관심사이며 이로 인한 차세대 이동통신 서비스의 기반 구축을 위한 중요 역할을 수행할 것으로 기대되고 있다. 여러 국내외 기업들은 사물인터넷 기반 구축을 위하여 여러 종류의 LPWAN에 관하여 연구 중에 있으며, 대표적으로 Semtech사의 LoRaWAN 기술이 있다. LoRaWAN은 장거리 저전력 네트워크로 수많은 디바이스, 센서를 관리하기 위함이며, 적게는 수백 개에서 많게는 수천 개에 달하는 디바이스, 센서와 통신이 이루어진다. 본 논문에서는 LoRaWAN 사용 시 자원 낭비를 줄이고 최대한의 성능을 위한 게이트웨이의 최적 노드 용량에 대해 분석하였다.

• 대한원격탐사학회지
• /
• 제35권2호
• /
• pp.317-326
• /
• 2019

개발사업 및 관련 환경영향은 공간 위에서 이루어지므로 환경영향평가 과정에서는 공간정보의 활용이 필수적이다. 본 연구에서는 환경영향평가의 공간정보 활용을 확대하기 위해 산재된 공간정보를 인벤토리로 구축, 환경영향평가 과정에서 활용할 수 있도록 제시하고자 한다. 이를 위해 환경영향평가 과정에서의 공간정보 이용 현황과 공공의 정보시스템에서 제공하는 환경 관련 공간정보 목록을 조사하였다. 그리고 선행연구 분석을 통해 도출한 인벤토리 구축 방법론을 적용, 환경영향평가 시 활용할 수 있는 공간정보 목록을 작성하였다. 그 결과 환경영향평가 업무에서 활용중인 공간정보는 64개 항목으로 조사되었으며, 자료 활용성 및 연계 갱신 가능성을 토대로 환경영향평가에 활용 가능한 국토환경공간정보는 45개 항목으로 조사되었다. 최종적으로 중복 제거 및 항목 재구성을 통해 14개의 신규 항목을 포함한 총 49개 항목을 도출, 공간정보 인벤토리로 제시하여 공간정보 기반의 환경영향평가에 기여할 수 있도록 하였다.

• 한국건축친환경설비학회 논문집
• /
• 제12권6호
• /
• pp.655-668
• /
• 2018

This paper analyzes the applicability and technology level of the green building element technology by analyzing the scorecard of the LEED Canada certified buildings. The results of this analysis will be able to evaluate the current status and level of application of green building element technology, and it will be used as a basic data to prepare for the revision of the certification standards and the establishment of strategies for the future green building activation. In this study, 1,010 LEED Canada certified buildings from 2011 to 2016 were analyzed. The results were analyzed by focusing on the status of greening by certification category and the characteristics of adoption by sub-category. The results of the study are summarized as follows. (1) EA category showed the biggest difference between the certification scores and the adoption rates than other categories, and it was confirmed that it is not easy category from the viewpoint of practical adoption. On the other hand, the ID (Innovation & Design Process) and WE were analyzed to be relatively easy to apply, with a score of over 72%. (2) In the case of Platinum class, the upper adoption rate is shown in all categories except MR. The Gold class shows the adoption rate of WE and ID in the top, and the middle rate in most categories. Silver grades showed lower rates in the three categories except WE, ID and EQ. Certified grades showed the adoption rates of the bottom except the two categories.

• 플랜트 저널
• /
• 제17권3호
• /
• pp.37-41
• /
• 2021

P&ID(Piping and Instrument Diagram)는 플랜트의 장치 및 계장 정보를 집약적으로 담고 있는, 엔지니어링 핵심도면이다. 한 장의 P&ID에는 심볼로 표현된 수백 여개의 정보들이 존재하며, 이에 대한 디지털 전산화 작업이 수작업으로 진행되고 있어 많은 인력과 시간이 소요된다. 기존 연구들은 CNN 모델을 이용하여 도면 객체 검출에 성공하였으나, 도면 한 장당 약 30분, 인식률은 90% 정도로 현장에서 구현하기에는 부족한 성능이다. 따라서 본 연구에서는 영역 검출과 객체 인식을 동시에 처리하는 1-stage 객체 검출 알고리즘을 제안하였다. 이미지 레이블링 오픈소스 툴을 이용하여 학습 데이터를 구축하고 딥러닝 모델 학습을 통해 도면 내 심볼 이미지 인식 방법을 제안한다.

• 대한건축학회논문집:구조계
• /
• 제35권2호
• /
• pp.3-11
• /
• 2019

The recent earthquake of Pohang (M5.4) and the Gyeongju earthquake (M5.8) suggested the possibility of a strong earthquake in Korea and reminded us that the Korea is no longer an earthquake-safe zone. In the disaster recovery stage in a disaster like an earthquake, the investigation of the damage situation and the safety assessment of the building serve to provide important information for the initial action such as establishment of the recovery strategy and rescue of the survivor. However, the research that depends on manpower can not cope with the difficulty of processing a large number of doses in a short time, and the expertise of the manpower must be taken into consideration, which may result in delayed initial action. In this study, we propose an rapid safety evaluation technique of building using unmanned aerial vehicle which evaluates the performance and safety of buildings by integrating conventional safety inspection method with unmanned aerial vehicle technology and developed evaluation method of each evaluation factor. In order to verify this, the buildings damaged by the earthquake in Pohang were checked and compared using this system. The results are consistent with the results of the existing emergency earthquake risk assessment. As a result, the possibility of checking the emergency safety using the unmanned aerial vehicle for the damaged structures in case of a large-scale disaster such as an earthquake was confirmed.

• 대한건축학회논문집:구조계
• /
• 제35권9호
• /
• pp.199-206
• /
• 2019

Experimental study on the durability characteristics to examine the feasibility of concrete with high water-tightness and self-healing performance to minimize maintenance of concrete for artificial ground is as follows. 1) When blending agent, swelling agents, and curing accelerator were added on the ternary system cement with blast-furnace slag fine particles and fly ash to give a self-healing property, higher blending strengths by 82% at design standard strength of 24MPa and by 74% at design strength of 30MPa, respectively could be obtained. 2) The permeability test for the specimens having high water-tightness and no shrinkage showed that the permeability was reduced at maximum of 98%. However, the permeability was decreased as the design strength was increased, showing the reduction rate of 87% at the design strength of 50MPa. 3) The depth of carbonation of blast-furnace slag and fly ash was increased in all the specimens compared with those of OPC only. However, as the material age was increased, carbonation penetration depth was decreased compared with the reference blend. 4) Compared with the reference blending using only OPC, the freeze-thaw resistance was higher in the case of blending with 40% of blast-furnace slag and 10% of fly ash at the design standard strength of 50MPa. In addition, the freeze-thaw resistance in general was superior in the design standard strength of 50MPa with the lower water-binder ratio (W/B) as compared with the design standard strength of 24MPa and 30MPa with the high water-binder ratios.

• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.53-60
• /
• 2018

For test on flooring board laminated with PVC decoration materials in order to replace the current surface materials such as HPL in decoration wood-based flooring board. the Results of comparison and analysis are as follows: For thermal conductivity, flooring board decorated with PVC did not show huge differences when temperature was rising and lowering compared to the flooring materials laminated with the existing HPL surface materials. It seems the most meaningful results for using it as indoor flooring materials. That is, in Korea where there is the culture focusing on ondol heating, use amount of heat energy and efficiency of flooring materials are very important and sensitive issues, involving immediately with household economy of final consumers, and it might be a criteria to judge basic performances required as flooring materials. As a result of the analysis on mandatory durability test items such as abrasion resistance, absorption width expansion rate, impact resistance, surface hardness, and impact absorption for flooring materials, compared to flooring board laminated with general HPL surface decoration materials, decoration wood-based flooring board laminated with PVC surface decoration materials which is higher abrasion resistance with smaller transformation and has better durability and impact absorption of the surface, is available for actual application as indoor flooring board, and for replacing surface decoration materials impregnated with heat-hardened resion such as HPL.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권6호
• /
• pp.2148-2167
• /
• 2021

The proliferation of the Internet of Things (IoT) technologies and applications, especially the rapid rise in the use of mobile devices, from individuals to organizations, has led to the fundamental role of secure wireless networks in all aspects of services that presented with many opportunities and challenges. To ensure the CIA (confidentiality, integrity and accessibility) security model of the networks security and high efficiency of performance results in various resource-constrained applications and environments of the IoT platform, DDO-(data-driven operation) based constructions have been introduced as a primitive design that meet the demand of high speed encryption systems. Among of them, the TMN-family ciphers which were proposed by Tuan P.M., Do Thi B., etc., in 2016, are entirely suitable approaches for various communication applications of wireless mobile networks (WMNs) and advanced wireless sensor networks (WSNs) with high flexibility, applicability and mobility shown in two different algorithm selections, TMN64 and TMN128. The two ciphers provide strong security against known cryptanalysis, such as linear attacks and differential attacks. In this study, we demonstrate new probability results on the security of the two TMN construction versions - TMN64 and TMN128, by proposing efficient related-key recovery attacks. The high probability characteristics (DCs) are constructed under the related-key differential properties on a full number of function rounds of TMN64 and TMN128, as 10-rounds and 12-rounds, respectively. Hence, the amplified boomerang attacks can be applied to break these two ciphers with appropriate complexity of data and time consumptions. The work is expected to be extended and improved with the latest BCT technique for better cryptanalytic results in further research.

• 한국전산구조공학회논문집
• /
• 제34권2호
• /
• pp.93-100
• /
• 2021

현재 우리나라에서 설계 및 시공되는 대부분의 철근콘크리트 벽식구조 공동주택은 상부벽체-하부골조 시스템으로 구성되어 있으며 서로 다른 상하부 구조시스템의 결합을 위해 전이보를 이용한다. 상부의 하중을 하부의 기둥 부재에 효율적으로 전달하기 위해 전이보가 큰 강성을 지녀야 하고 이로 인해 부재의 춤이 커져 많은 물량의 투입되고 전반적인 경제성이 떨어지게 된다. 이러한 문제점을 해결하기 위해 기둥을 벽체요소로 대체하고 일반적인 콘크리트 전이보에 비해 규모가 작은 경계보를 수평 구조요소로 활용한 새로운 경계보-벽체 시스템을 제안한다. 제안된 시스템의 축하중에 대한 성능 평가를 위해 3차원 비선형 유한요소해석을 수행하였다. 주요 설계변수로 상하부벽체 길이비, 경계보 부재의 전단보강근 간격, 하부벽체로 연속되는 상부벽체 수직근의 꺾임 비율, 슬래브 길이를 설정하고 제안된 시스템의 성능에 얼마나 기여하는지 분석하였다.

• 식품과학과 산업
• /
• 제54권2호
• /
• pp.73-81
• /
• 2021

스마트 HACCP을 통한 기록관리 자동화는 센서를 이용하여 중요관리점(CCP) 모니터링을 함으로써 한계기준 이탈 여부를 실시간으로 확인할 수 있으며 알람기능 구현을 통해 개선조치에 이르기까지의 소요시간을 단축시킬 수 있다. 식품업체의 HACCP 업무운영 효율성·편의성을 향상시킴과 동시에 제조공정의 자동화를 통해 수작업에 대한 병원성미생물의 교차오염도를 효율적으로 관리가 가능하여 식품산업의 경쟁력을 향상시킬 수 있다. 또 종사자의 비의도적 실수와 데이터 위·변조를 방지할 수 있게 해 소비자에게 식품안전에 대한 보다 신뢰성 높은 믿음을 줄 수 있다. 이렇듯 스마트 HACCP은 정부·기업·소비자 모두에게 공공의 이익을 가져다줄 새로운 미래이다.