• 제목/요약/키워드: Construction Labor

검색결과 731건 처리시간 0.024초

임시·일용직 증가 현상의 원인 - 수요 측면을 중심으로 - (The Cause of Increase in the Temporary In Korea: Labor Demand Approach)

  • 김용성
    • 노동경제논집
    • /
    • 제31권1호
    • /
    • pp.1-27
    • /
    • 2008
  • 본 연구는 최근 노동시장의 특정인 임시 일용직 증가의 원인을 분석하였다. 임시 일용직 증가 원인으로 기업의 수익성, 시장 변동성, 근로자의 자질에 대한 불확실성 측면에서 살펴보았다. 결과에 따르면 제조업의 경우 기업의 수익성과 건설업과 도소매업은 상품수요의 변동성과 관련이 깊은 것으로 나타났다. 한편 1990년대 이후 증가한 교육의 양적 팽창이 질적 향상을 수반하지 못한 결과 근로자의 자질에 대한 불확실성을 증가시키면서 기업은 상용직보다 임시 일용직을 선호하게 되었을 가능성도 간접적으로 확인되었다.

  • PDF

시계열분석을 통한 실적공사비의 노무비 분석 및 예측에 관한 연구 (Time Series Analysis and Forecast for Labor Cost of Actual Cost Data)

  • 이현석;이은영;김예상
    • 한국건설관리학회논문집
    • /
    • 제14권4호
    • /
    • pp.24-34
    • /
    • 2013
  • 2004년부터 정부는 무분별한 저가입찰을 방지하고, 기술 경쟁에 의한 적정 시장 가격 반영 및 효율적인 계약관련 업무를 추진하는 것을 목적으로 실적공사비 제도를 도입 시행하고 있다. 하지만 실적공사비 제도의 도입이 낙찰단가 하락에 의한 정부의 예산 절감에만 기여할 뿐, 실질적인 시장가격을 반영하고 있지 못하고 있다는 우려의 목소리 또한 꾸준히 제기되고 있는 실정이다. 낙찰단가 하락에 의한 일반건설업체의 비용 부담은 전문건설업체로 전가되며 최종적으로 건설노동자의 피해로 이어질 가능성이 크기에, 실적공사비에 적정 가격을 반영하고 현실화하는 것은 성공적인 실적공사비 제도의 정착에 매우 중요한 요소이다. 따라서 본 연구는 노무비를 중심으로 노무중심공정을 도출하고 이들의 실적공사비단가와 해당 기능공의 시중노임단가를 비교하여 실적공사비의 현실화수준을 파악하고, 시계열분석을 통해 변화를 분석하고 예측하였다. 시장가격이 반영되지 않은 낙찰 단가의 실질적 하락은 노무 환경의 변화를 가속화하고, 임금체불, 업체부도 등 건설근로자의 직접적인 피해로 이어질 수 있기에 향후 본 연구가 현행 실적공사비 제도의 문제점을 해결하고, 개선방안을 수립하기 위한 기초 자료로 활용될 수 있을 것으로 기대된다.

시뮬레이션에 의한 건설기계 시공능력 산정;굴삭기&로우더의 사이클타임 (Estimation of Construction Equipment Production Rates based on Simulation;Cycle time of backhoe & loader)

  • 한예령;박희성;장철기
    • 한국건축시공학회지
    • /
    • 제9권6호
    • /
    • pp.105-111
    • /
    • 2009
  • 건설기계는 건설사업의 성공적인 수행의 중요한 요인이며, 건설기계에 소요되는 비용이 건설공사비에서 차지하는 비중은 점차 증가하고 있다. 우리나라는 표준품셈에 제시된 건설기계 시공능력 산정식을 이용하여 건설기계의 시간당 작업량을 계산하고 있다. 건설기계 성능은 개선되고 있으나 시공능력 산정식에서 활용되고 있는 요소들은 이를 반영하지 못하고 있는 실정이며 극히 부분적으로만 재 개정되었다. 본 연구에서는 건설기계 시공능력 산정식 요소 중 사이클타임에 대해서 조사하였다. 이를 위해 먼저 관련 선행연구를 분석하였고, 건설공사에 주로 사용되는 건설기계인 굴삭기와 로우더의 사이클타임을 실사하였다. 수집된 자료와 현행 표준품셈의 시공능력 산정식에 적용되는 수치를 바탕으로 시뮬레이션 프로그램인 크리스탈볼을 활용하여 건설기계의 시공능력을 산정하였다.

철근공사의 공장가공 현황분석과 활성화 방안 (Analysis of re-bar manufacturing system in plant and its facilitate method)

  • 조훈희;강태경;박현용;윤석헌;허영기;박우열
    • 한국건설관리학회논문집
    • /
    • 제8권1호
    • /
    • pp.57-65
    • /
    • 2007
  • 철근 공장가공은 현장가공에 비하여 가공의 정밀도를 향상시킬 수 있을 뿐 아니라 철근의 절단 손실을 줄일 수 있는 장점이 있다. 최근 도심지 공사의 증가로 야적장이 부족하고 숙련된 현장 노무인력의 확보가 어려워짐에 따라 향후 철근의 공장가공 방식은 점차 확대될 것으로 예상된다. 본 연구에서는 철근가공 공장방식의 중요성을 인지하고 그간의 연구들이 배근작업과 전문건설업체를 중심으로 이루어졌다는 점에 착안하여 18개 철근가공 공장을 대상으로 실태조사를 실시하였다. 실태조사 결과를 토대로 철근공장가공 활성화를 위한 방안으로 철근가공 형상 표준화, 시공성이 반영된 배근상세도 작성 및 철근 가공형상표 산출 업무 전산화, 배근작업의 표준화와 ADC기반의 철근자재 추적시스템을 개발을 제안하였다.

거푸집 공사의 생산성 분석을 통한 작업조 기반의 Cost Data Prototype 개발에 관한 연구 (Development of Cost Data Prototype based on Production Crew by Productivity Analysis of Form Work)

  • 강동완;지성민;현창택
    • 한국건설관리학회논문집
    • /
    • 제13권1호
    • /
    • pp.44-52
    • /
    • 2012
  • 합리적인 방법에 의해 결정된 건설 공사비를 포함하여 계약을 체결하는 것은 공공 건설공사의 사업비 관리 측면에서 매우 중요하다. 국내에서는 건설 공사비를 산정하는 기준으로 표준품셈이 사용되고 있지만, 표준품셈에서 제시하는 품의 적정성에 대해서 문제가 제기되고 있으며, 현장의 자원 투입량과 품셈에서 제시하는 자원 투입량의 차이로 합리적이고 효율적인 공사비를 산정하는데 어려움이 있다. 본 연구에서는 건설 공사비를 합리적으로 산정하기 위하여, 공동주택 거푸집 공사의 생산성 분석을 통한 작업조 기반의 Cost Data Prototype을 제시하였다. 특히, CYCLONE 모델은 민감도 분석을 통해 최적의 작업인원을 제시하는 모델이므로, 거푸집 공사의 다양한 작업공간과 작업인원을 대상으로 생산성을 분석할 수 있는 도구로 활용이 가능하다. 그리고 개발된 회귀식은 거푸집 공사의 작업인원을 독립변수로 하여, 필요한 작업량을 종속변수로 예측하는데 활용이 가능할 것이다.

유동화공법에 의해 제조한 고유동 콘크리트의 원가분석에 관한 기초적 연구 (A Fundamental Study on the Estimation of Construction Cost of High Fluidity Concrete Applying Flowing Concrete Method)

  • 한민철;손성운;오선교;김성수;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2002년도 학술.기술논문발표회
    • /
    • pp.99-102
    • /
    • 2002
  • This paper discusses the estimation of construction cost of high fluidity concrete using segregation reducing type superplasicizer with 350kgf/cm2 of design strength and 60$\pm$5cm of slump flow in order to verify the cost down effect of high fluidity concrete compared with that of plain concrete with 350kgf/cm2 of design strength and 18cm of slump and with 210kgf/cm2 of design strength and 15cm of slump. According to research, under same strength levels, although material cost of high fluidity concrete is somewhat higher than that of plain concrete due to segregation reducing type superplasticizer, labor cost and equipment cost of high fluidity concrete is cheaper than that of plain concrete. However, based on the strength differences, high fluidity concrete shows lower material cost, labor cost and equipment cost than that of plain concrete due to decreasing in size of member and re-bar caused by high strength development of concrete.

  • PDF

일반재해 발생시 산재처리 방안연구 -건설현장 사고사례를 중심으로- (General Disaster Scattered Action Research -Focusing On the Construction Site Accident Cases-)

  • 유용태;강경식
    • 대한안전경영과학회지
    • /
    • 제17권4호
    • /
    • pp.23-33
    • /
    • 2015
  • Recently, the Ministry of Employment and Labor Management is a trend to strengthen all men death rate than the accident rate. Points reduction in the accident rate change orders related to credit rating score to +2 points in his plans as part of +1 point. In addition, according to the fancy linger RISK treatment in the event of a disaster site and fiction treatment to achieve accident-free during processing the scene interspersed with equity issues have been raised. In general disaster for the problem in the first two cases occurs when abnormal process according to the disaster site manager positions dismissal policy, each division headquarters itself, interspersed disasters performance compared to processing in accordance with the refrain, processing expenses in accordance with the composition of untreated industrial accident, costs and burdens partners FTC, there is a possibility that the issues raised, such as the Ministry of Employment and Labor. In response to domestic social practices focused on the construction site practices and prevention measures should be evaluated with respect to what.

Investigating the Maintenance Cost of Rest Areas: A Case Study of Nevada

  • Shrestha, Kishor;Shrestha, Pramen P.
    • 국제학술발표논문집
    • /
    • The 9th International Conference on Construction Engineering and Project Management
    • /
    • pp.624-631
    • /
    • 2022
  • Highway Rest Areas are envisioned to provide an accessible space for rest and parking for travelers, especially those driving a long distance. In addition, modern highway Rest Areas provide many amenities to highway users, including wifi service, picnic tables, litter barrels, running water, public telephones, and sometimes even free coffee. Various studies were conducted in the domain of Rest Area facility design and their operating costs in different states; however, limited studies were conducted on the maintenance costs of these facilities. Therefore, this study's main objective is to compute the annual maintenance cost of Rest Areas in the state of Nevada. This study also analyzes the main cost categories of the maintenance works. The raw cost data of Nevada Rest Area maintenance from 1990 to 2012 were collected from the Nevada Department of Transportation (NDOT). Results show that the maintenance cost fluctuated over the study period; the maintenance cost decreased from 1991 to 2004 and then increased until 2012. The primary cost categories of maintenance work are labor, equipment, and material costs. Among these, labor cost was the largest category with 56 percent of the total maintenance cost, followed by equipment cost and material cost. The findings of this study may help NDOT and other transportation agencies plan their budget for future Rest Area maintenance activities.

  • PDF