• Water Engineering Research
• /
• v.2 no.4
• /
• pp.243-259
• /
• 2001

Local phenomena around bridge piers and abutments are generally considered to be similar, nevertheless the presence of the incoming boundary layer on the side wall in the abutment case generates extra pressure gradients and consequently a more complex vortex pattern. In the literature, experimental data for bridge abutments are relatively scarce; in particular almost no data are available for the time evolution of the scour. In this work we present the results of several long duration (3 days longrightarrow5weeks) clear water scour laboratory tests around bridge abutments; the time evolution of the erosion process is analysed with respect to local and global characteristic values (maxima, volume, hole shape). In particular we analyse the effect of the constriction ratio b/B between the transversal obstacle dimension and the flume width: in many practical situations abutments (or piers) obstruct a significant portion of the channel, so that the average acceleration due to constriction is expected to increase the scour effects of the local acceleration around the obstacle. Measured values for maximum scour are poorly predicted by literature formulas. Scour depths are positively correlated with the constriction ratio, but increases are smaller than expected from literature indications. Experimental results show that models for bridge piers cannot be directly applied to abutments; in particular, time scales for the latter are significantly larger than for piers.

• Journal of the Optical Society of Korea
• /
• v.17 no.3
• /
• pp.249-254
• /
• 2013

In ophthalmology, a pupillometer, a device to measure the diameter of the pupil of the eye, can provide information on the function of the autonomic nervous system. The current pupillometers on the market are either too large to be a handheld instrument, or relatively expensive. In this study, a pupillometer based on a smartphone was designed. Both white and infrared LEDs and a 3M pixel camera of a smartphone were applied for the visual stimuli to an eye and for the acquisition of the eye images, respectively. Contrary to the existing method of pupil measurement that usually observe the variation of pupil diameter, the proposed algorithm in this study was applied to calculate the constriction ratio of the pupillary area in response to pupillary light reflex. The results showed that the constriction ratio of the pupillary area were all in the normal range (above 4.0) from the sixteen healthy participants. It is believed that the approach to pupil measurement used in this study is suitable for a mobile interface, and this system can be applied to clinical research, home-use healthcare, and distributed to some areas which suffer from problems like a lack of medical support.

• Journal of the Society of Disaster Information
• /
• v.5 no.2
• /
• pp.140-152
• /
• 2009

Recently the occurrence ratio of mechanical accidents in industrial disaster of korea is increased, but very little accident information has been given regarding the prevention of mechanical accidents. In this study, mechanical accidents by the analysis of industrial accident case was examined. And it was proposed the risk assessment method and building database for investigation of risk factors in mechanical accident. As a result, from mechanical accidents database, it was found that the occurrence ratio of mechanical accident by constriction and falling etc. is very high and death ratio by mechanical accident is larger than that of usual accident. And we applied the quantitative risk assessment method proposed by this study in the mechanical accident analysis of a domestic manufacturer. From the results, the risk factors due to constriction, curling, falling and scattering are principal causes of mechanical accidents. These result is similar to that of the analysis of mechanical accidents for recent 12 years in korea.

• Water for future
• /
• v.18 no.4
• /
• pp.361-367
• /
• 1985

The variation of water surface profile due to the constriction of flow section in open channel was analysed by numerical scheme. Findings are that the variations of water surface are mainly dependent on the constriction ratio and Froude number of uniform flow, and the magnitudes of backwater obtained from the flow profiles agrees fairly well with the experiments by Skogerboe. This implies that the backwater can be predicted by numerical technique.

• Journal of Korean Society of Forest Science
• /
• v.80 no.4
• /
• pp.383-392
• /
• 1991

The genetic variation of Pinus densiflora and Pinus thunbergii by Giemsa C-banding was investigated and the results were as follows : 1. From Karyotype analysis of P. densiflora and P. thunbergii by Giemsa C-banding, somatic chromosome numbers of both species were 2n=24. 2. Chromosome of P. densiflora was M-type in arm ratio and they were no variation among individuals but variation in number and position of the secondary constriction and telomere banding among individuals. 3. P. thunbergii showed also M-type in arm ratio of chromosome, however, there was no variation in both number and position of the secondary constriction among individuals. 4. From chromosome C-banding, bands were appeared in the position of centromere and the secondary constriction in both P. densiflora and P. thunbergii. 5. In P. densiflora, the bands were shown on the secondary-constriction in chromosome No. 3, 4 and 7 of all individuals and the bands of the secondary constriction in chromosome No. 1, 2 and 5 showed variation among individuals. In chromosome No. 9, 10 and 11, the bands were shown in telomere and showed variation among individuals. 6. In P. thunbergii, the bands were shown on the secondary constriction in chromosome No. 2, 3, 7 and 8, and were shown no variation among individuals. There was no band on telomere. 7. The genetic variation by C-banding were shown in P. densiflora among individuals but no in P. thunbergii, and were shown on the secondary constriction in chromosome No. 4 of Pinus densiflora and in clnromosome No. 8 of Pinus thunbergii. These are the difference between the two species by C-banding.

• Journal of Korean Society of Forest Science
• /
• v.77 no.1
• /
• pp.53-64
• /
• 1988

The idiogram of pine chromosomes was obtained from the length, the ratio of the long and short arm, and the position of the secondary constriction. The descending order of the long arm was found by analyzing the idiogram for 6 species of hard pines and 5 species of soft pines growing in Korea. The basic chromosome number of the genus Pinus was n=12, of which the ten chromosomes were the M-type showing similar S/L ratio, and the other two short chromosomes were the heterobrachial SM-type and the sub-median centric SM-type. The interspecific identification was able to made by comparing the number and the position of the secondary constriction, and the pattern of descending order of the long arm. The intraspecific variation was also able to be identified by comparing the long arms Descending order among the provenaces. Some differences were found in the chromosomal structures between the hard- and the soft-pines. However, the differences were not apparent as much as those in the morphological characteristics. The results might not be exactly reproducible because of the variable responses of chromosomes depending on concentration of the chemicals, the temperatures and time of the treatments, and the analytical errors during the preparateur preparation.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.265-274
• /
• 2024

The current research focuses on the development of a numerical approach to forecast strongly subcooled flow boiling of FC-72 as the refrigerant in various vertical minichannel shapes for high-heat-flux cooling applications. The simulations are carried out using the Volume of Fluid method with the Lee phase change model, which revealed some inherent flaws in multiphase flows that are primarily due to an insufficient interpretation of shearlift force on bubbles and conjugate heat transfer against the walls. A user-defined function (UDF) is used to provide specific information about this noticeable effect. The influence of shape and the inlet mass fluxes on the flow patterns, heat transfer, and pressure drop characteristics are discussed. The computational results are validated with experimental measurements, where excellent agreements are found that prove the efficiency of the present numerical model. The findings demonstrate that the heat transfer coefficient decreases as the mass flux increases and that the constriction design improves the thermal performance by 24.68% and 10.45% compared to the straight and expansion shapes, respectively. The periodic constriction sections ensure good mixing between the core and near-wall layers. In addition, a slight pressure drop penalty versus the thermal transfer benefits for the two configurations proposed is reported.

• Journal of Korean Society of Forest Science
• /
• v.75 no.1
• /
• pp.38-45
• /
• 1986

This study was designed to investigate the karyotype analysis of Juniperus chinensis and its seven varieties, and P. densiflora and P. densiflora for. multicaulis. Following results were obtained. 1. Three varieties, J. chinensis v. kaizuka, J. chinensis v. aureo-variegata and J. chinensis v. procumbens are turned out as tetraploids. 2. Varieties having many long chromosomes and long mean relative length of chromosomes are J. chinensis and J. chinensis v. aureo-globosa, while varieties having short chromosomes are J. chinensis v. horizontalis and J. chinensis v. globosa. 3. Varieties with high mean ratio of long arm length to short arm are J. chinensis v. globosa and J. chinensis v. kaizuka, while a variety with the low mean ratio is J. chinensis v. aureo-globosa. 4. When chromosomes are arranged according to the total length, the most similar variety with J. chinensis was J. chinensis v. sargentii, J. chinensis v. horizontalis, J. chinensis v. globosa and J. chinensis v. aureo-globosa, while the least similar one was J. chinensis v. procumbens. 5. Pinus densiflora for. multicaulis has shorter mean relative length of chromosome than P. densiflora, while the arm ratio of the former is higher than the latter. 6. When chromosomes are arranged according to the total length, six chromosomes showed the same order between the two varieties. 7. P. densiflora for. multicaulis has many chromosomes with secondary constriction.

• Restorative Dentistry and Endodontics
• /
• v.40 no.2
• /
• pp.113-122
• /
• 2015

Objectives: The aim of this paper was evaluating the ratios of electrical impedance measurements reported in previous studies through a correlation analysis in order to explicit it as the contributing factor to the accuracy of electronic apex locator (EAL). Materials and Methods: The literature regarding electrical property measurements of EALs was screened using Medline and Embase. All data acquired were plotted to identify correlations between impedance and log-scaled frequency. The accuracy of the impedance ratio method used to detect the apical constriction (APC) in most EALs was evaluated using linear ramp function fitting. Changes of impedance ratios for various frequencies were evaluated for a variety of file positions. Results: Among the ten papers selected in the search process, the first-order equations between log-scaled frequency and impedance were in the negative direction. When the model for the ratios was assumed to be a linear ramp function, the ratio values decreased if the file went deeper and the average ratio values of the left and right horizontal zones were significantly different in 8 out of 9 studies. The APC was located within the interval of linear relation between the left and right horizontal zones of the linear ramp model. Conclusions: Using the ratio method, the APC was located within a linear interval. Therefore, using the impedance ratio between electrical impedance measurements at different frequencies was a robust method for detection of the APC.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.265-270
• /
• 1998

As the goal of enterprises is to pursuit benefits, the goal of safety management is not only preventing accidents but also promoting benefits and productivity. However, enterprises have failed to realize the necessity of safety management, partly because they didn't grasp any appropriate evidences advocating effectiveness of safety management. This study aimed to survey construction-site engineers' consciousness on safety management contributing to cost reduction, construction period and quality enhancement. The result of this study showed that constriction-site engineers recognized the ratio of direct cost to Indirect cost as 1:2. The proportion of repliers who thought that safety management is contributable to cost reduction was 35％, to construction period was 20％, and to quality enhancement was 48％. The construction sites with excellent safety accomplisments also had good work and selling amounts.