• 한국해양공학회지
• /
• 제5권2호
• /
• pp.198-198
• /
• 1991

Not only difference of fatigue crack growth and propagation behavior resulted from the grain size, the hardness ratio and volume fraction in M.E.F. dual phase steel composed of martensite in hard phase and ferrite in soft phase, but also the effects of the plastic constraint were investigated by fracture mechanics and microstructural method. The main results obtained are as follows: 1) The fatigue endurance of M.E.F. steel increases with decreasing the grain size, increasing the ratio of hardness and volume fraction. 2) The initiation of slip and crack occures faster as the stress level goes higher. These phenomena result from the plastic constraint effect of the second phase. 3) The crack propagation rate in the constant stress level is faster as the grain size gets larger, the ratio of hardness lower and volume fraction smaller.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1579-1586
• /
• 2020

Dissimilar metal joints (DMJs) are more common in the application of piping system of many industries. A 2- D and 3-D finite element analysis (FEA) is carried out on dissimilar metal Single Edged Notch Bending (DMSENB) specimens fabricated from ferritic steel, austenitic steel and Inconel - 182 alloy to study the behavior of DMJs with constraints by using linear elastic fracture mechanics (LEFM) principles. Studies on DMSENB specimens are conducted with respect to (i) dissimilar metal joint width (DMJW) (geometrical constraints) (5 mm, 10 mm, 20 mm, 30 mm and 50 mm) (ii) strength mismatch (material constraints) and (iii) crack lengths (16 mm, 20 mm and 24 mm) to study the DMJ behavior. From the FEA investigation, it is observed that (i) SIF increases with increase of crack length and DMJWs (ii) significant constraint effect (geometry, crack tip and strength mismatch) is observed for DMJWs of 5 mm and 10 mm (iii) stress distribution at the interfaces of DMSENB specimen exhibits clear indication of strength mismatch (iv) 3-D FEA yields realistic behavior (v) constraint effect is found to be significant if DMJW is less than 20 mm and the ratio of specimen length to the DMJW is greater than 7.4.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권7호
• /
• pp.3393-3412
• /
• 2017

As a main challenge in network virtualization, virtual network embedding problem is increasingly important and heuristic algorithms are of great interest. Aiming at the problems of poor correlation in node embedding and link embedding, long distance between adjacent virtual nodes and imbalance resource consumption of network components during embedding, we herein propose a two-stage virtual network embedding algorithm NA-PVNM. In node embedding stage, resource requirement and breadth first search algorithm are introduced to sort virtual nodes, and a node fitness function is developed to find the best substrate node. In link embedding stage, a path fitness function is developed to find the best path in which available bandwidth, CPU and path length are considered. Simulation results showed that the proposed algorithm could shorten link embedding distance, increase the acceptance ratio and revenue to cost ratio compared to previously reported algorithms. We also analyzed the impact of position constraint and substrate network attribute on algorithm performance, as well as the utilization of the substrate network resources during embedding via simulation. The results showed that, under the constraint of substrate resource distribution and virtual network requests, the critical factor of improving success ratio is to reduce resource consumption during embedding.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.920-925
• /
• 2001

A study on the topology optimization of a multi-spectral camera for space-use is presented. A multi-spectral camera for space-use experiences degradation of optical image in the space, which can not be detected on the optical test bench on the earth. An optical surface deformation of a primary mirror, which is a principal component of the camera system, under the self-weight loading is an important factor affecting the optical performance of the whole camera system. In this study, topology optimization of the primary mirror of the camera is presented. Total mass of the primary mirror is given as a constraint to the optimization problem. The sensitivities of the objective function and constraint are calculated by direct differentiation method. Optimization procedure is carried out by an optimality criterion method using the sensitivities of the objective function and the constraint. As a preliminary example, topology optimization considering a self-weight loading is treated. For practical use, the polishing pressure is included as a loading in the topology optimization of the primary mirror. Results of the optimized design topology for the primary mirror with varying mass ratios are presented.

• Steel and Composite Structures
• /
• 제46권1호
• /
• pp.33-51
• /
• 2023

This research presents a multi-material topology optimization for functionally graded material (FGM) and nonFGM with elastic buckling criteria. The elastic buckling based multi-material topology optimization of functionally graded steels (FGSs) uses a Jacobi scheme and a Method of Moving Asymptotes (MMA) as an expansion to revise the design variables shown first. Moreover, mathematical expressions for modified interpolation materials in the buckling framework are also described in detail. A Solid Isotropic Material with Penalization (SIMP) as well as a modified penalizing material model is utilized. Based on this investigation on the buckling constraint with homogenization material properties, this method for determining optimal shape is presented under buckling constraint parameters with non-homogenization material properties. For optimal problems, minimizing structural compliance like as an objective function is related to a given material volume and a buckling load factor. In this study, conflicts between structural stiffness and stability which cause an unfavorable effect on the performance of existing optimization procedures are reduced. A few structural design features illustrate the effectiveness and adjustability of an approach and provide some ideas for further expansions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.266-271
• /
• 2001

Spherical indentation technique was developed to evaluate the flow properties of metallic materials in carbon steel, stainless steel and alloys, etc. Through the spherical indentation test, differently degraded 1Cr-1Mo-0.25V steel's mechanical properties were observed and compared with conventional standard test data. The flow properties of 1Cr-1Mo-0.25V steels were estimated by analyzing the indentation load-depth curve. To characterize the flow property, we used material yield slope and constraint factor index rather than strain-hardening exponent because the variation of strain-hardening exponent was very little and the data showed irregularly. And the constraint factor's effect was small when the material yield slope was taken into account.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.24-33
• /
• 2000

This paper investigates the relationship between J-integral and crack tip opening displacement, ${\delta}_t$ using Gordens results of numerical analysis. Estimation were carried out for several strength levels such as ultimate, flow, yield, ultimate-flow, flow-yield stress to determine the influence of strain hardening and the ratio of crack length to width on the $J-{\delta}_t$ relationship. It was found that for SE(B) specimens, the $J-{\delta}_t$ relationship can be applied to relate J to ${\delta}_t$ as follows $J=m_j{\times}{\sigma}_i{\times}{\delta}_t$ where $m_j=1.27773+0.8307({\alpha}/W)$, ${\sigma}_i:{\sigma}_U$, ${\sigma}_{U-F}={\frac{1}{2}} ({\sigma}_U+{\sigma}_F$), ${\sigma}_F$, ${\sigma}_F}$ $Y=({\sigma}_F+{\sigma}_Y)$, ${\sigma}_Y$

• Journal of Sport and Applied Science
• /
• 제5권2호
• /
• pp.47-53
• /
• 2021

Purpose: The purpose of this study is to generate industrial insights for developing sports movie industry. Related studies are scare. Research design, data, and methodology: The study employed case study and selected typical case samples who seem informative about sport movie industry. The authors interviewed six experts who are experienced in sport movie and related academic sector. Interviews were audio-taped and the text were decoded by multiple reading. Through this process, the study categorized significant meanings and produced results. Interviewees reviewed again the final findings to confirm validity, which calls member check. Results: It was suggested that developmental factors of sports movie were the realization of realistic sports scenes by using technologies. Second, participants told that contents of sport movie need to reflect real stories and it should tell the stories. Regarding constraints of sport movies, movie producers feel difficulty to make scenes in that sports are inherently quickly performed. Another constraints are that production cost is expensive but audiences are barely attended. Conclusions: For promoting economic outcomes and developing sport movie industry, government needs to financially support related markets to support sport movie producers assisting them to concentrate their movie works. Future directions for related-studies were discussed.

• 한국통신학회논문지
• /
• 제21권1호
• /
• pp.91-102
• /
• 1996

ATM(asynchronous transfer mode)망에서 멀티미디어 트래픽이 효율적으로 전송되기 위해서는 전송되는 트래픽의 특성이 충분한 고려된 경로설정이 이루어져야 한다. 본 논문에서는 ATM망의 가상경로/가상채널의 특성을 기반으로한 점 대 다중점 경로설정 알고리즘을 제안한다. 제안한 알고리즘은 가상경로 트리를 사용하며 경로설정시 가상경로/가상채널 스위칭의 특성이 반영된 비용함수를 사용하였다. 또한 비용함수는 링크 비용, 지연 및 지연에 대한 가중치로 구성되며 지연에 대한 가중치는 트래픽의 지연감도에 의해 결정된다. 제안한 알고리즘은 트래픽의 지연한계를 만족시킬 수 있는 경로를 설정할 뿐만 아니라, 동일한 경로설정 비용을 가지는 지연한계내의 경로중 지연을 최적화하는 경로를 선택할 수있다. 또한 지연에 대한 가중치를 조절하여 지연 및 비용에 최적화된 알고리즘에 근사한 성능을 가질 수있다. 시뮬레이션 결과, 제안된 알고리즘은 가중치가 0.8에서 1사이에 존재할 때 경로설정 비용측면에서는 비용에 최적화된 알고리즘의 성능에 근사하였으며, 종단간 지연측면에 있어서는 지연이 강하게 반영된 알고리즘의 성능에 근사되었다.

• Journal of Biosystems Engineering
• /
• 제16권4호
• /
• pp.372-383
• /
• 1991

This study was performed to find out optimum drying conditions of red pepper to minimize energy consumption and drying time, respectively, under the quality constraint using Box's complex method. The results from this study are summarized as follows. 1. From the optimization results for the drying process, energy consumption was minimized at the drying condition to minimize drying time. 2. The optimization results according to drying method was found out to be greatly affected by the quality constraint of red pepper. Especially, the turning point to change drying stage was a very important factor in the drying method with two stages.