• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.908-913
• /
• 2000

In the process of integrity evaluation for nuclear power plant components, a series of fracture mechanics evaluation on surface cracks in reactor pressure vessel(RPV) must be conducted. These fracture mechanics evaluations are based on stress intensity factor, K. However, under pressurized thermal shock(PTS) conditions, the combination of thermal and mechanical stress by steep temperature gradient and internal pressure causes considerably high tensile stress at the inside of RPV wall. Besides, the internal pressure during the normal operation produces high tensile stress at the RPV wall. As a result cracks on inner surface of RPVs may experience elastic-plastic behavior which can be explained with J-integral. In such a case, however, J-integral may possibly lose its validity due to constraint effect. In this paper, in order to verify the suitability of J-integral, two dimensional finite element analyses were applied for various surface crack. Total of 18 crack geometries were analyzed, and Q stresses were obtained by comparing resulting HRR stress distribution with corresponding actual stress distributions. In conclusion, HRR stress fields were found to overestimate the actual crack-tin stress field due to constraint effect.

• Structural Engineering and Mechanics
• /
• 제47권1호
• /
• pp.131-147
• /
• 2013

In this paper, constraint-based fracture mechanics analyses of hollow cylinders with internal circumferential crack under tensile loading are conducted. Finite element analyses of the cracked cylinders are carried out to determine the fracture parameters including elastic T-stresses, and fully-plastic J-integrals. Linear elastic finite element analysis is conducted to obtain the T-stresses, and elastic-plastic analysis is conducted to obtain the fully plastic J-integrals. A wide range of cylinder geometries are studied, with cylinder radius ratios of $r_i/r_o$ = 0.2 to 0.8 and crack depth ratio a/t = 0.2 to 0.8. Fully plastic J-integrals are obtained for Ramberg-Osgood power law hardening material of n = 3, 5 and 10. These fracture parameters are then used to construct conventional and constraint-based failure assessment diagrams (FADs) to determine the maximum load carrying capacity of cracked cylinders. It is demonstrated that these tensile loaded cylinders with circumferential cracks are under low constraint conditions, and the load carrying capacity are higher when the low constraint effects are properly accounted for, using constraint-based FADs, comparing to the predictions from the conventional FADs.

• 한국음향학회지
• /
• 제36권3호
• /
• pp.151-157
• /
• 2017

잡음신호제거 성능을 향상시키기 위하여 일반선형제약적응배열이 제안되었다. 잡음신호제거 성능이 배열계수 벡터공간에서 검토되었다. 제약면이 이득요소에 의하여 원점에 대하여 수직 방향으로 이동하는데 이득요소가 커지면 원점과의 거리는 감소하게 됨이 밝혀졌다. 따라서 이득요소의 변화가 계수벡터와 잡음신호 방향벡터와의 직교성의 정도에 영향을 주어서 일반선형제약적응배열의 잡음신호제거 성능이 이득요소에 의하여 향상되게 된다. 제안된 적응 배열은 최적의 이득요소 수치에서 간섭적인 신호환경에서는 기존의 선형제약적응배열에 비하여 더 나은 잡음신호제거 성능을 나타내고 비간섭적인 신호환경에서는 비슷한 잡음신호제거 성능을 나타냄이 관찰되었다.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1726-1746
• /
• 2022

This paper presents fracture mechanics analysis results for various cracks located at pressurized water reactor pressure vessel nozzle crotch corners taking into consideration constraint effect. Technical documents such as the ASME B&PV Code, Sec.XI were reviewed and then a fracture mechanics analysis procedure was proposed for structural integrity assessment of various nozzle crotch corner cracks under normal operation conditions considering the constraint effect. Linear elastic fracture mechanics analysis was performed by conducting finite element analysis with the proposed analysis procedure. Based on the evaluation results, elastic-plastic fracture mechanics analysis taking into account the constraint effect was performed only for the axial surface crack of the reactor pressure vessel outlet nozzle with cladding. The fracture mechanics analysis result shows that only the axial surface crack in the reactor pressure vessel outlet nozzle has the stress intensity factor exceeding the low bound of upper-shelf fracture toughness irrespectively of considering the constraint effect. It is confirmed that the J-integral for the axial crack of the outlet nozzle does not exceed the ductile crack initiation toughness. Hence, it can be ensured that the structural integrity of all the cracks is maintained during the normal operation.

• 한국조경학회지
• /
• 제32권1호
• /
• pp.23-32
• /
• 2004

This study aims to examine constraints on visits to urban community parks and to find ways to elevate the efficient use of parks. To achieve this, the study relied on empirical study method and the descriptive method; additionally, present condition survey was performed with a user interview, on the assumption that a park visit is a form of leisure. As a result, the item of 'insufficient lighting facilities' shows the highest mean and the item of 'low quality of park' follows Previous research also revealed that the item of 'the lack of lighting facilities' is a major factor on user dissatisfaction, so a design and management program for night time users are fully researched and elaborately accomplished. Also, the high response of 'low quality of park' shows that the park supply policy in Korea focusses mainly on quantity so far, and it shows that user's dissatisfaction for park facilities becomes one of the major constraints of park visit. The factor analysis, on the object of 35 items except 2 items, appeared 5 factors: accessibility, inner discord, companion, family matters, park-itself-matters. Oneway Anova test showed that 4 factors except 'park-itself-matters' have reliable difference in constraint cognition by age and education. The visit constraint of 'park-itself-matters' did not appear different by any personal characteristics. Without regard to personal characteristics, it is regarded that this factor has the greatest effect upon park visits. In general, people who are disadvantaged strongly cognize constraints even in leisure such as a park visit, which is a simple and inexpensive leisure activity. Therefore, a park like a pocket park, which is small but located in a neighborhood, is more needed than a central park like a symbolic and huge park in every new city. Careful concern for night activity should be accomplished in the planning process.

• Structural Engineering and Mechanics
• /
• 제34권2호
• /
• pp.143-157
• /
• 2010

This paper presents theoretical solutions for the three-dimensional (3D) stress field in an infinite isotropic elastic plate containing a through-the-thickness circular hole subjected to far-field in-plane loads by using Kane and Mindlin's assumption. The dangerous position, where the premature fracture or failure of the plate will take place, the expressions of the tangential stress at the surface of the hole and the out-of-plane stress constraint factor are found in a concise, explicit form. Based on the present theoretical solutions, a comprehensive analysis is performed on the deviated degree of the in-plane stresses from the related plane stress solutions, stress concentration and out-of-plane constraint, and the emphasis has been placed on the effects of the plate thickness, Poisson's ratio and the far-field in-plane loads on the stress field. The analytical solution shows that the effects of the plate thickness and Poisson's ratio on the deviation of the 3D in-plane stress components is obvious and could not be ignored, although their effects on distributions of the in-plane stress components are slight, and that the effect of the far-field in-plane loads is just on the contrary of that of the above two. When only the shear stress is loaded at far field, the stress concentration factor reach its peak value about 8.9% higher than that of the plane stress solutions, and the out-of-plane stress constraint factor can reach 1 at the surface of the hole and is the biggest among all cases considered.

• Journal of information and communication convergence engineering
• /
• 제15권2호
• /
• pp.73-78
• /
• 2017

A general linearly constrained broadband adaptive array is examined in the eigenvector space with respect to the optimal weight vector and the adaptive algorithm. The optimal weight vector and the general adaptive algorithm in the eigenvector space are obtained by eigenvector matrix transformation. Their operations are shown to be the same as in the standard coordinate system except for the relevant transformed vectors and matrices. The nulling performance of the general linearly constrained broadband adaptive array depends on the gain factor such that the constraint plane is shifted perpendicularly to the origin by an increase in the gain factor. The general linearly constrained broadband adaptive array is observed to perform better than a conventional linearly constrained adaptive array in a coherent signal environment, while the former performs similarly to the latter in a non-coherent signal environment.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1531-1538
• /
• 2003

This paper compiles solutions of plastic $\eta$ factors and crack tip stress triaxialites for standard and nonstandard fracture toughness testing specimens, via detailed three-dimensional (3-D) finite element (FE) analyses. Fracture toughness testing specimens include a middle cracked tension (M(T)) specimen, SE(B), single-edge cracked bar in tension (SE(T)) and C(T) specimen. The ligament-to-thickness ratio of the specimen is systematically varied. It is found that the use of the CMOD overall provides more robust experimental J estimation than that of the LLD, for all cases considered in the present work. Moreover, the J estimation based on the load-CMOD record is shown to be insensitive to the specimen thickness, and thus can be used for testing specimen with any thickness. The effects of in-plane and out-of-plane constraint on the crack tip stress triaxiality are also quantified, so that when experimental J value is estimated according to the procedure recommended in this paper, the corresponding crack tip stress triaxiality can be estimated. Moreover, it is found that the out-of-plane constraint effect is related to the in-plane constraint effect.

• 대한산업공학회지
• /
• 제27권4호
• /
• pp.406-412
• /
• 2001

IP address lookup is to determine the next hop destination of an incoming packet in the router. The address lookup is a major bottleneck in high performance router due to the increased routing table sizes, increased traffic, higher speed links, and the migration to 128 bits IPv6 addresses. IP lookup time is dependent on data structure of lookup table and search scheme. In this paper, we propose a new approach to build a lookup table that satisfies the memory constraint. The design of lookup table is formulated as an optimization problem. The objective is to minimize average depth from the root node for lookup. We assume that the frequencies with which prefixes are accessed are known and the data structure is level compressed trie with branching factor $\kappa$ at the root and binary at all other nodes. Thus, the problem is to determine the branching factor k at the root node such that the average depth is minimized. A heuristic procedure is proposed to solve the problem. Experimental results show that the lookup table based on the proposed heuristic has better average and the worst-case depth for lookup.

• 한국해양공학회지
• /
• 제5권2호
• /
• pp.58-66
• /
• 1991

Not only difference of fatigue crack growth and propagation behavior resulted from the grain size, the hardness ratio and volume fraction in M.E.F. dual phase steel composed of martensite in hard phase and ferrite in soft phase, but also the effects of the plastic constraint were investigated by fracture mechanics and microstructural method. The main results obtained are as follows: 1) The fatigue endurance of M.E.F. steel increases with decreasing the grain size, increasing the ratio of hardness and volume fraction. 2) The initiation of slip and crack occures faster as the stress level goes higher. These phenomena result from the plastic constraint effect of the second phase. 3) The crack propagation rate in the constant stress level is faster as the grain size gets larger, the ratio of hardness lower and volume fraction smaller.