• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.161-166
• /
• 2008

In general structures, cleavage fracture may develop under the low constraint condition of larger scale yielding with a shallow surface crack. However, standard procedures for fracture toughness testing require very severe restrictions of specimen geometry. So the standard fracture toughness data makes the integrity assessment irrationally conservative. In this paper, cleavage fracture toughness tests have been made on side-grooved PCVN (precracked charpy V-notch) type specimens (10 by 10 by 55 mm) with varying crack depth, The constraint effects on the crack depth ratios are quantitatively evaluated by scaling model and Weibull stress method using 3-D finite clement method, After correction of constraint loss due to shallow crack depths, the statistical size effect are also corrected according to the standard ASTM E 1921 procedure, The results snowed a good agreement in the geometry correction regardless of the crack size, while some over-corrections were observed in the corrected values of $T_0$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.606-611
• /
• 2000

It has been noted that the low frequency absorption coefficient of a porous sample placed in a standing wave tube is affected by the nature of the sample's edge constraint. The edge constraint has the effect of stiffening the solid phase of the sample, which itself can be strongly coupled to the material's fluid phase, and hence the incident sound field, by viscous means at low frequencies. In recent work it has also been shown that such a circumferential constraint causes the low frequency transmission loss of a layer of fibrous material to approach a finite low frequency limit that is proportional to the flow resistance of the layer and which is substantially higher than that of an unconstrained sample of the same material. However, it was also found that the benefit of the circumferential edge constraint was reduced in a transitional frequency range by a shearing resonance of the sample. Here it will be shown that the effect of that resonance can be mitigated or eliminated by adding additional axial and radial constraints running through the sample. It will also be shown that the constraint effect can be modeled closely by using a finite element procedure based on the Biot poroelastic theory. Implications for low frequency barrier design are also discussed.

• 산업경영시스템학회지
• /
• 제31권4호
• /
• pp.134-139
• /
• 2008

Most approaches for continuous review inventory problem need tables for loss function and cumulative standard normal distribution. Furthermore, it is time-consuming to calculate order quantity (Q) and reorder point (r) iteratively until required values are converged. The purpose of this paper is to develop a direct method to get the solution without any tables. We used approximation approaches for loss function and cumulative standard normal distribution. The proposed method can get the solution directly without any iterative procedure for Q, r and without any tables. The performance of the proposed approach is tested by using numerical examples. The budget constraint of this paper assumes that purchasing costs are paid at the time an order is arrived. This constraint can be easily replaced by capacity constraint or budget constraint in which' purchasing costs are paid at the time an order is placed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권6호
• /
• pp.2873-2892
• /
• 2019

Reducing the interference to the licensed mobile users and obtaining the energy efficiency are key issues in cognitive heterogeneous networks. A corresponding rate loss constraint is proposed to be used for the sensing-based spectrum sharing (SBSS) model in cognitive heterogeneous networks in this paper. Resource allocation optimization strategy is designed for the maximum energy efficiency under the proposed interference constraint together with average transmission power constraint. An efficiency algorithm is studied to maximize energy efficiency due to the nonconvex optimal problem. Furthermore, the relationship between the proposed protection criterion and the conventional interference constraint strategy under imperfect sensing condition for the SBSS model is also investigated, and we found that the conventional interference threshold can be regarded as the upper bound of the maximum rate loss that the primary user could tolerate. Simulation results have shown the effectiveness of the proposed protection criterion overcome the conventional interference power constraint.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1508-1517
• /
• 2015

Optimal Power dispatch is the short-term decision of the optimal output of a number of power generation facilities, to meet the system demand, with the objective of Power dispatching at the lowest possible cost, subject to transmission lines power loss and operational constraints. The operational constraint includes power balance constraint, generator limit constraint, and emission dispatch constraint and valve point effects. In this paper, Opposition based Differential Evolution Algorithm (ODEA) has been proposed to handle the objective function and the operational constraints simultaneously. Furthermore, the valve point loading effects and transmission lines power loss are also considered for the efficient and effective Power dispatch. The ODEA has unique features such as self tuning of its control parameters, self acceleration and migration for searching. As a result, it requires very minimum executions compared with other searching strategies. The effectiveness of the algorithm has been validated through four standard test cases and compared with previous studies. The proposed method out performs the previous methods.

• 소성∙가공
• /
• 제8권1호
• /
• pp.47-56
• /
• 1999

The governing functional in plastic deformation has to satisfy the incompressibility constraint. This incompressibility constraint imposed on velocity fields can be removed by introducing either Lagrange multiplier or the penalty constant into the functional. In this study, two-dimensional rigid plastic FEM programs using these schemes were developed. These two programs and DEFORM were applied in a cylinder upsetting and a closed die forging to compare the values of load, local mean stress and volume loss. As the results, the program using Lagrange multiplier obtained a more exact and stable solution, but it took more computational time than the program using the penalty constant. Therefore, according to user's need, one of these two programs can be chosen to simulate a metal forming processes.

• International Journal of Control, Automation, and Systems
• /
• 제5권2호
• /
• pp.218-222
• /
• 2007

This paper presents a new Perfect Tracking Control (PTC) scheme for linear systems with state constraint. The proposed controller increases the number of the steps on-line for perfect tracking to satisfy the given ellipsoid-type state constraint. The unavoidable step delay that we impose is minimized by solving LMI feasibility problems and the possible feedback information loss is avoided. The proposed schemes are easy to develop, theoretically simple and clear, and include the conventional PTC as its special case.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 학술대회 논문집 전문대학교육위원
• /
• pp.104-106
• /
• 2000

This paper presents an algorithm for optimal reactive power dispatch problem based on Improved Genetic Algorithm(IGA). Optimal Reactive Power Dispatch (ORPD) is particularized to the minimization of transmission line losses by suitable selection of generator reactive power outputs and transformer tap setting. For the objective, in this paper, Loss Re-Distribution Algorithm(LRDA) is new applied to the equality constraint of ORPD. The proposed method has been evaluated on the IEEE 30 bus system. Results of the application of the method are compared with a base case.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.382-383
• /
• 2005

• 한국통신학회논문지
• /
• 제32권1A호
• /
• pp.13-23
• /
• 2007

본 논문에서는 OFDMA(Orthogonal Frequency Division Multiple Access) 시스템에서 실시간 트래픽 전송을 위한 효율적 패킷 스케줄링 기법을 제안한다. 본 방식은 패킷의 시간 지연 구속을 우선 만족시키면서 데이터 전송률도 향상시키는 기법으로 TEDC(Throughput Enhancement Under Delay-Constraint)라 불리운다. 사용자별 트래픽 특성에 따른 허용 지연 시간(Tolerable Delay Time TDT)을 정의하여 다양한 시간 지연 요구 조건을 차별화 하여 관리함으로써 무선 자원의 사용 효율을 향상시킨다. 논문에서 제안하는 TEDC 방식은 두 단계로 이루어진다. 첫 번째 단계에서는, 실시간 서비스를 위해 요구되는 시간 지연 구속을 만족하기 위해 잔여 허용 시간이 남지 않은 긴급한 사용자들에게 우선적으로 무선자원을 할당한다. 두 번째 단계에서는 첫 번째 단계에서 할당하고 남은 잉여 무선 자원에 대해서 자원의 활용도를 최대화하여 전체 데이터 전송률(Throughput)을 향상시킨다. 제안된 TEDC 방식의 성능은 기존의 자원할당 방식인 Round robin, M-LWDF, EXP 방식과 패킷 손실률, 데이터 전송률, 채널 활용도 측면에서 비교, 분석된다. 시뮬레이션 결과, TEDC 방식이 패킷 손실률, 데이터 전송률, 채널 활용도 측면에서 다른 자원 할당 방식보다 모두 우수한 성능을 보였다.