• Journal of Korea Water Resources Association
• /
• v.45 no.7
• /
• pp.713-727
• /
• 2012

In this study, the bivariate frequency analysis of the independent annual rainfall event series was done to be used for the runoff analysis, whose results were also compared with those from the conventional univariate frequency analysis. This study was applied to three differently-sized basins such as the Joongryang Stream, Chunggye Stream, and Ooyi Stream. The Clark model was used as the runoff model, and the SCS method was applied for the calculation of the effective rainfall. The alternating block method and the Huff method were considered to be compared for the temporal distribution of rainfall event. Summarizing the results are as follows. (1) The difference between the univariate and bivariate frequency analysis results were large when the rainfall duration was short, but significantly decreased as the rainfall duration increased. The univariate frequency analysis results were bigger when the rainfall duration was short, but smaller in opposite case. (2) The peak flow derived by applying the alternating block method was bigger than that by the Huff method. Also, the peak flow when applying the alternating block method increased as the rainfall duration increased, but converged smoothly around the rainfall duration of 24 hours. (3) For the Joongryang Stream, when applying the Huff method, the peak flow derived for the bivariate frequency analysis was bigger than that for the univariate case, but for the other two basins, the results were opposite. When applying the alternating block method, the results were consistent for all three basins that the peak flow derived by applying the bivariate frequency analysis was bigger than those by the univariate frequency analysis.

• Journal of Korea Water Resources Association
• /
• v.42 no.3
• /
• pp.235-246
• /
• 2009

This study theoretically reviews the basin storage coefficient and concentration time using the Nash model, a simple unit hydrograph theory. First, the storage coefficient and concentration time of Nash instantaneous unit hydrograph (IUH) are derived based on their definitions, whose characteristics as well as their relationship are also reviewed. Additionally, several empirical equations of storage coefficient and concentration time commonly used in Korea are evaluated by comparing them with those for the Nash IUH. Major results of this study are summarized as follows. (1) The concentration time of Nash IUH is approximately linearly proportional to the number of linear reservoirs, but the storage coefficient non-linearly to the square root. That is, if increasing the number of linear reservoirs by four times, the concentration time becomes also increased by about four times, but the storage coefficient only about two times. This result has a special meaning to understand the effect of basin subdivision on the concentration time and storage coefficient. (2) The storage coefficient and concentration time of Nash IUH are not independent each other, so their independent estimation does not make any physical sense. As the concentration time among the two is more sensitive to the number of linear reservoirs, which should be estimated first, then the storage coefficient considering the concentration time estimated. (3) Empirical equations of concentration time can be divided into two groups, one following the linear channel theory and the other not, whose equation forms are also found to be very similar. This result indicates that the characteristic factors dominating the concentration time are very similar, indicating the possibility of its regionalization over a basin with consistent equation forms. (4) Those for storage coefficient like the Russell formulae are found to consider the physical characteristics of a basin, so their unreasonable applications could sufficiently be excluded.

• Journal of Life Science
• /
• v.13 no.3
• /
• pp.314-323
• /
• 2003

The purpose of this study was to examine the effects of xenobiotic nuclear receptors, CAR, SXR, and PPAR${\gamma}$ on the transcriptional activity of estrogen receptor in human breast cancer cell lines and compare with those in human hepatoma cell line. Two different breast cancer cell lines, MCF-7 and MDA-MB-231 were cultured and effects of CAR, SXR, and PPAR${\gamma}$ on the ER-mediated transcriptional activation of synthetic (4ERE)-tk-luciferase reporter gene were analyzed. Consistent with the previous report, CAR significantly inhibited ER-mediated transactivation and SXR repressed modestly whereas the PPAR${\gamma}$ did not repress the ER-mediated transactivation. However, in breast cancer cells neither of the xenobiotic receptors repressed the ER-mediated transactivation. Instead, they tend to increase the transactivation depending on the cell type and xenobiotic nuclear receptors. In MCF-7, SXR but neither CAR nor PPAR${\gamma}$ slightly increased ER-mediated transactivation whereas in MDA-MB-231, CAR and PPAR${\gamma}$ but not SXR tend to increase the transactivation of the reporter gene. These results indicate that the effects of ER cross-talk by the CAR, SXR, and PPAR${\gamma}$ , are different in breast cancer cells from hepatoma cells. In conclusion, the transcriptional regulation by estrogen can involve different cross-talk interaction between estrogen receptor and xenobiotic nuclear receptors depending on the estrogen target cells.

• Journal of Preventive Medicine and Public Health
• /
• v.21 no.2 s.24
• /
• pp.307-319
• /
• 1988

In order to determine the contents of lead, cadmium and zinc, the tissues of the crussian carp, Carassius carassius, collected from the middle streams of the Nakdong river were examined. During the dry season from 8 to 15, March, 1987, six loci were selected to sample the fish and river water; five of them were the midstreams of the Nakdong river i. e., the vicinities of the Andong dam, the Nakdong bridge, the Waegwan bridge, Gangjung and Gaepori, the other one was the Kumho river around the Paldal bridge(see Fig. 1). The microanalyses of lead and cadmium contents were undertaken by the atomic absorption spectrophotometer(Model IL-551) connected with CTF-IL 655, while that of Zinc by the flame method with IL551 only. The contents of lead and cadmium in water sampled from Gaepori distant from about 30km downward from the junction with the Kumho river were about 1.5 times higher than those from Gangjung distant about 0.5km upward from the junction, and the content of zinc from Gaepori was slightly higher than that from Gangjung. However, the contents of lead and cadmium in water sampled from Gaepori were three fifth of those from the vicinity of Paldal bridge far about 2km upperward from the junction. In the other words, the contents of lead and cadmium in the samples from the vicinity of the Paldal bridge were about 2.5 to 3 times higher than those from the Gangjung and 5 times higher than those from the Andong dam. The contents of the heavy metals in the tissues of Carassius carassius were relatively consistent to those of the aquatic environments where the fish were collected, with higher contents in the tissues of the crussian carp collected from the vicinity of Gaepori and the Paldal bridge which were so much polluted than in those from other loci in upper stream from the junction. And the contents of lead and cadmium in tissues were positively correlated with the age of the fish, however, that of zinc was not. The contents of lead in bone of crussian carp from the vicinity of the Paldal bridge in the group of 0-1 year old fish were similar to those of 4-5 years old fish from Gaepori, and higher than those of 3-4 years old fish collected from the upper stream of the junction. It is likely that fishing from Gaepori and the paldal bridge is not recommended, and all the industrial producers have to pay intensive attention to the water pollution due to the sewage disposal.

• Korean Journal of Weed Science
• /
• v.16 no.3
• /
• pp.187-193
• /
• 1996

To supply seeds with a good quality as plant materials for herbicide screening and to know whether the germination characteristics could be associated with a differential response to herbicides, germination characteristics and differential responses to herbicides were investigated with 3 species of a genus Setaria ; Yellow foxtail(Setaria glauca P. Beauv, SETGL), Giant foxtail(Setaria faberi Hetrm, SETFA), and Green foxtail(Setaria viridis P. Beauv, SETVI). Degree of dormancy was high in the order of SETGL, SETVI and SETFA. The dormancy of SETGL seed was relatively well removed by room temperature and drying storage, but SETFA and SETVI by low temperature and wetting storage(stratification). For breaking dormancy of SETGL, SETVI and SETFA, it was necessary for being kept under the above storage conditions for at least 2, 4 and 4-5 months, respectively. When the dormancy-breaked seeds were transfered to low temperature($4^{\circ}C$) and drying condition, SETGL showed germination rate of 96% even after 2 month storage. However, SETVI and SETFA showed a decreased germination of 54% and 69%, respectively, with a decreased velocity of germination, indicating that secondary dormancy might be induced. On the other hand, a significant change in germination rate was not observed as the seeds were transfered to room temperature($25^{\circ}C$) and drying condition. The germinability of SETGL seed began to decline from 6th year after storage in room temperature and drying condition. All of 3 species showed relatively high germination rate at alternating temperature of $30^{\circ}C$/$20^{\circ}C$(14hr/10hr) and their germination were not increased by light. All of 3 species exhibited similar responses to cycloxydim, sethoxydim and primisulfuron in greenhouse experiment. In contrast, SETVI and SETFA were relatively susceptible to fenoxapropethyl, SETFA to fluazifop-butyl, SETGL and SETFA to clorimuron-ethyl, and SETGL to EK-2612. The difference in herbicidal response among 3 species was the highest in the treatment of EK-2612. These results suggest that there is no a consistent tendency in responses of 3 species to herbicides which have the same target site. And the relationship between germination characteristics and differential responses to herbicides was not found.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.4
• /
• pp.223-237
• /
• 2008

The purpose of this research was to provide the information needed for improving the contents in housing unit of middle school technology and home economic textbook. For this purpose, a survey questionnaire was developed to examine teachers' importance perception of 48 contents in housing unit. A direct survey and an e-mail survey were used to collect data from teachers, and a total number of 233 data were analyzed. Conclusions were summarized as following: 1. Among the 48 contents in housing unit, the average score of teachers' importance perception of the 18 contents on 'interior environment and equipments' was 3.94; the average score of teachers' importance perception of the 15 contents on 'living space plan and use' was 3.78; and the average score of teachers'importance perception of the 15 content on 'housing maintenance and repair' was 3.42. Therefore, the 15 contents on 'housing maintenance and repair' must be revised. 2. Teachers' importance perception of 25 contents, among the 48 contents in housing unit, were significantly differentiated by gender, age, teaching experience, scholastic attainment, subject in charge(technology, home economics, technology and home economics), school type(boys' middle school, girls' middle school, coeducation), and region(city, county). Therefore, the 25 contents, of which importance perception were influenced by teachers' characteristics, must be revised in order to maintain the consistent importance perception. Suggestions were that the team teaching of technology and home economic textbook was more recommendable; that the local situations must be considered in the contents of housing unit and; that the contents of housing unit must be segmented into a minimum unit for the accurate evaluation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.87-97
• /
• 2015

There's a trend towards vitalization of nightscape planning businesses nationally and locally as well for city image making and activation of regional economy, but there is still no systematic nightscape planning going on for lack of relevant researches and objective evaluations. This study aims to suggest the guideline for nightscape planning by conducting an eye tracking experiment and survey for recognizing the characteristics of a nightscape. Furthermore, the authors intended to verify the eye-tracking method as a tool for landscape evaluation. The research site was restricted in the campus of Virginia Tech, VA, and those were selected by experts' survey among various types of nightscape images. The variables for analyzing the characteristics of nightscape images selected were 'preference', 'safety(fear)' and 'clearness'. 'Fixation duration', 'saccade duration', 'scan path length', and 'pupil size' were selected as the eye movement measurements. The results of this study are as follows: The first outcome found was that there were significant differences among the characteristics(preference, safety and clearness) of a nightscape by MANOVA, and these variables were correlated positively by Pearson's correlation. Secondly, there were differences on fixation duration, saccade duration and scan path depending on the nightscape setting statistically. Also, the eye tracking measurement in an open setting was recorded lower than enclosed settings. In the result of a heat map, we found the meaning of the fixated areas on both viewing without intention and viewing intentionally. It turned out that the fixated areas were consistent with the areas the subjects felt preferred and clarity in all of the nightscape images, which means people usually focus on what they prefer and see clearly in a certain nightscape. Based on this result and previous studies, the authors could make a conclusion that eye tracking method can apply to evaluate nightscape settings in terms of analyzing the whole characteristics and finding specific points for the detailed analysis as well. Therefore, these results can contribute by suggesting nightscape planning, implication of the landscape evaluation, and implication of the eye tracking study.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.6
• /
• pp.28-39
• /
• 2017

The purpose of this study was to analyze the tendencies of the written test questions regarding the scientific plant names in the subject of scenic planting in the national qualification test for landscape engineers. To achieve this purpose, targeting the 20 questions in the subject of scenic planting, the study chronologically analyzed the types of the presented questions about the scientific names of the plants, the changes in their year-to-year number, and their presentation frequency over the past 11 years from 2006 to 2016. The following was found by an analysis of the tendency of the questions presented over 11 years from 2006 to 2016 regarding the scientific plant names in scenic planting in the written test of the national technical qualification examination for landscape engineers. The number of these questions was 234, and they were classified into 13 items: scientific names, families/genuses/ species, characteristics, barks, roots, foliage, flowers, fruits, properties, places of origin, stalks, leave, and uses. After analyzing the examination question trends per year, the year in which the highest number of questions was given was 2013 at 56.6%; the ratio of questions asking botanical names increased until 2013, although that ratio decreased starting in 2014 due to consistent efforts from the landscaping field. The plant species most frequently asked about were Betula platyphylla and Taxus cuspidata and others frequently asked about included Pinus densiflora, Acer palmatum, Forsythia koreana, Cercis chinensis, Robinia pseudoacacia, Cornus officinalis, Zelkova serrata, Abies holophylla, Camellia japonica, Sophora japonica, Chaenomeles sinensis, which were asked about more than 10 times. The number of plant species presented as question items or choice items was 240 and their presentation frequency was 806, Among these, 66 species were steadily presented more than five times. They were presented 486 times, accounting for 27.5% of all species. The number of the new plant species which began to be presented in 2009 were 119(49.58% including Quercus myrsinaefolia) of all 240 species, indicating that their presentation frequency was gradually increased. As a result of comparative analysis of questions on arbor and shrub, evergreen and leaf abscission that have been presented for recent 11 years, the questions on arbor were more than shrub, the questions on leaf abscission were more than evergreen.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.11
• /
• pp.509-520
• /
• 2015

College Scholastic Ability Test(CSAT) is a primary test to evaluate the study achievement of high-school students and used by most universities for admission decision in South Korea. Because its level of difficulty is a significant issue to both students and universities, the government makes a huge effort to have a consistent difficulty level every year. However, the actual levels of difficulty have significantly fluctuated, which causes many problems with university admission. In this paper, we build two types of data-driven prediction models to predict correct answer rate and to identify significant factors for CSAT English test through accumulated test data of CSAT, unlike traditional methods depending on experts' judgments. Initially, we derive candidate question-specific factors that can influence the correct answer rate, such as the position, EBS-relation, readability, from the annual CSAT practices and CSAT for 10 years. In addition, we drive context-specific factors by employing topic modeling which identify the underlying topics over the text. Then, the correct answer rate is predicted by multiple linear regression and level of difficulty is predicted by classification tree. The experimental results show that 90% of accuracy can be achieved by the level of difficulty (difficult/easy) classification model, whereas the error rate for correct answer rate is below 16%. Points and problem category are found to be critical to predict the correct answer rate. In addition, the correct answer rate is also influenced by some of the topics discovered by topic modeling. Based on our study, it will be possible to predict the range of expected correct answer rate for both question-level and entire test-level, which will help CSAT examiners to control the level of difficulties.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.