• Journal of Conservation Science
• /
• v.27 no.2
• /
• pp.163-179
• /
• 2011

This study was to identify the material characteristics and provenance of the crucibles, potteries and roof tiles from the Wonsinheungdong site in Daejeon, Korea. Similar mineral composition of each samples showed by microscopic observation and X-ray diffraction analysis. However, wall thickness and mineral characterization of each ceramic artifacts are quite different. The pottery is characterized by thin wall with 0.5 to 0.7 cm and fine grained clay matrix. While the crucible and roof tile has thick wall with 1.3 to 2.5 cm, poorly sorted texture of many quarz, orthoclase and plagioclase whithin ceramic fabric. And large elonagated voids formed by hydrocarbone of straw during the firing and loose matrix obseved in crucible. All ceramic samples and ground soil of the site show similar mineralogical characteristics geochemical behavior and clay-mineralization degree. This indicates making that the soil is probable to be a raw material of all ceramic from the Wonsinheungdong site. Also, firing temperature of most ceramic artifacts are estimated as 850 of all ceramic from the Wonsinheungdong site. Also, firing temperature of most ceramic artifacts are estimated as 850 to $950^{\circ}C$ but hardest pottery fired high temperature between 1,050 to $1,150^{\circ}C$. The vitreous molten materials interpreted in slag included segregation of copper and tin. But it can not exclude the possibility that the glass molten material because observed reddish and greenish vitreous fine structure under microscopic.

• Journal of Conservation Science
• /
• v.1 no.1 s.1
• /
• pp.12-26
• /
• 1992

Ilsan peat-bed site, newly constructed city area, is located at the northern part of Seoul. This site is situated near the mouth of Han river, which flows through central Korea. Many fossil woods were excavated from this site, and surveyed the wood anatomical features. Totally 90 specimens were identified into 10 species including two roots and five barks which were not identified in detail. Alnus japonica and A. maxmowiczii are the most common and occupied 26. 7%, 34.4% of the total specimen number respectively, and then other species which excavated from Ilsan area are follows : Fraxinus rhynchophylla(18.9%), Lepido-balanus spp.(3.3%), Maackia amurensis(2.2%), Diospyros spp.(2.2%), Juglans mandshrica(1.1%), Prunophora spp.(1.1%), Malus or Pyrus spp.(1.1%), Rhamnus spp.(1.1%). Among the identified species there are fairly some species growing in the central - or northern temperate zone, such as A. maxmowiczii, F. rhynchophylla, Lepidobalanus spp., M. amurnsis, J. mandshurica, Rhumnus spp. Therefore, it can be estimated that the former temperature of Ilsan area was same or slightly cold than today. The species bearing fruit for food as .J, mandshunca, Diospyros spp., Prunophora spp., Mulus or Pyrus spp. were regarded as artificially planting trees, because they do not grow together in the same site.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.3
• /
• pp.179-187
• /
• 2007

This study was conducted to develop site index equations for some pine species by climatic zones based on the relationships between site index and environmental factors. The selected pine species were Pinus densiflora Sieb. et. Zucc., Pinus densiflora for, erecta, and Pinus thunbergii. A total of 28 environmental factors were obtained from a digital forest site map. The influence of 28 environmental factors on site index was evaluated by multiple regression analysis. Four to eight environmental factors were selected in the final site index equation for pine species by climatic zones. The site index equations developed in this study was then verified by three evaluation statistics such as model's estimation bias, model's precision and mean square error type of measure. We concluded that the site index equations for the pine species by climatic Bones were capable of estimating forest site productivity. Based on these site index equations, the amount of productive areas for the species by climatic zones was estimated by applying the GIS technique to digital forest maps.

• Journal of Conservation Science
• /
• v.10 no.1 s.13
• /
• pp.31-37
• /
• 2001

The metallurgical investigation of four lumps of bronze from the third building site of the northern workshop site at the Neungsan-ri temple site in Buyeo was performed. The microstructures of a section of sample was observed by SEM and qualitative and quantitative analysis of the sample was performed by EDS. The results are as follows: Sample 1 of the lump of bronze from northern workshop site in the third building site at Neungsan-ri temple site and sample 2 are speculated to be low-quality bronze resulting from refinery of matte which formed on the process of bronze refinery. Sample 3 is speculated as a lump of bronze which is one of Cu-Sn system and the one made by alloy only with pure bronze and tin on the process of bronze refinery. Sample 4 is confirmed as a lump of bronze which is one of Cu-Sn-Pb system from alloy of tin and lead into pure bronze. It is believed that the third building site at Neungsan-ri temple site in Buyeo produced bronze matte by refinery of copper ore or produced low-quality bronze by melting matte imported from outside.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.325-334
• /
• 2010

In order to clarify the effect of consolidant, the artificial porous material with low intensity was manufactured using granite powder and Portland cement. We have prepared four kinds of alkoxysilane system consolidants, a acrylic resin and a epoxy resin and investigated about characteristics before and after consolidation. As a result of the research, Silres BS OH 100 was effective for density and surface hardness. SS-101 with hydrophobicity and Site SX-RO with hydrophilicity had the good durability over salts weathering. On the other hand, Syton HT-50 and Paraloid B72 were easily destructed by salt weathering because they were concentrated on surface area by the low penetration depth. Araldite 2020 was the most effective consolidant for improvement of physical properties.

• Conservation Science in Museum
• /
• v.13
• /
• pp.45-49
• /
• 2012

A scientific analysis was carried out on the 14 pieces of glass beads excavated from the Daho-ri site NO. 6, Changweon. Most of the glass pieces were made of light blue transparent glass with round bubbles aligned in a regular direction. As a result of the SEM-EDS analysis, all the glass pieces turned out to be within the potash glass group (K₂O-SiO₂) and were identified to be the LCA (Low CaO, Low Al₂O₃) series glass, of which the concentration is 5% or below for CaO and Al₂O₃ respectively. In addition, it is presumed that plant materials were refined or a mineral (saltpetre, KNO₃) was used as the raw materials for making potash and also that the ingredient acting as a colorants for light blue color was affected deeply by CuO.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.101-108
• /
• 2016

Lead isotope ratio of bronze artifacts excavated from Dongchon Site in Sunchang have determined by TIMS. As results of comparison lead isotope ratio of bronze objects with the provenance data of galenas of Korea, China, and Japan, the provenance of three material of bronze objects were turned out to originate from the southern and northern part of China. On the other hands, data were plotted either in zone 3 of the South Korean galena map. The results of these scientific analysis of bronze objects can be used as basic data in comparison researches on manufacturing technology, provenance of bronze objects to be found in the future.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.411-420
• /
• 2009

A series of scientific analyses, including ICP-AES, microstructure, and TIMS, were carried out on 5 bronze spoons among 14 bronze artifacts excavated from the Ok-dong site in Andong, North Gyeongsang Province. The results of analysis showed that the bronze spoons were formed from an alloy of no more than 75% Cu and 21~23% Sn, placing it in the category of brassware, with trace elements such as Pb, Fe, and Zn. In particular, plumbum Pb contents of which traces of 0.04% were found, appears to have been added as an impurity during smelting. The microstructure of the bronze spoons suggests that the casting process involved using a spoon-shaped hollow mold, followed by an ropid-cooling process after the shape was perfected at approximately $586^{\circ}C$. After comparison of data measured from thermal ionization mass spectrometry (TIMS) of galena from Korea, China, and Japan, it appears that the raw materials for the bronze spoons included galena (lead sulfide) produced from the southern part of China.

• Journal of Conservation Science
• /
• v.12 no.1 s.15
• /
• pp.31-47
• /
• 2003

The stone implements from the Unjeonri relic sites were studied on the basis of petrology, geochemistry and archaeogeological interpretations. Magnetic susceptibility (MS) of the stone implements were mainly lest than 0.5 $(10^{-3}\;SI\;unit)$, however, stone axe of syenitic rock (2.37), stone axe of schist (0.19) and stone knife of slate (0.11) showed different from the some measured rocks of an outcrop. Geochemical evolution trend of both a stone implement and the surface rock were identical when it a normalization to use the behavior, enrichment, compatibility and incompatibility of the elements. But, some rocks of a axe (schist), a knife (slate), a arrowhead (shale) could not confirm typical occurrence and the distribution area within the Unjeonri site and a radius 10 km. In the Unjeonri site, the stone implements suggest that coexisting two types as domestic- and foreign-type lithic artifacts.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.155-160
• /
• 2009

This study is designed to optimize the method of using SE-101 for strengthening the durability and the stabilization of moving historical site. The permeability and the shear strength of The epoxy SE-101 with low viscosity were measured on different particle sizes and moisture content of soil. Like it can be expected from the data of viscosity, as the soil particle size was increased, the permeability was also increased, while the shear strength was decreased. And especially, it is noted that the deviation of permeability can be more extreme according to the different hardening speed of macromolecule and mineral additives. As the rate of moisture content in soil sample is increased, the deviation between permeability and shear strength is also increased. Even though among the same soil sample, some parts of it can be weaker than others, which cause the breakages of epoxy products. Thus, it is necessary that the soil should be dried over 50% of permeation depth of SE-101 before use.