• Nuclear Engineering and Technology
• /
• v.54 no.12
• /
• pp.4585-4600
• /
• 2022

A pool scrubber is often used as a wet-type design to mitigate the consequence of a severe nuclear accident. While studies indicated higher decontamination performance of a deeper pool, utilizing a very tall pool can be problematic due to potential structural stability and water backflow issues. This study proposes, as an alternative to a single pool system, a pool scrubber system composed of serially connected multiple pools with lower heights. Since large fraction of aerosol removal takes place in the injection region, serially connected pool scrubber system is expected to enhance the overall decontamination capability of a pool scrubber system. To support the analysis of the proposed system's decontamination capability, a new computer model was developed in the study to describe the bubble size dependent effect on aerosol removal including the effect of pool residence time. The accuracy of the new model was examined against experimental data for its validation. The proposed scrubber system composed of serially connected multiple shorter pools is found to have much improved decontamination performance over the current single pool system design.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.585-592
• /
• 2017

Most sewer lines buried in the city are likely to be collapsed due to serious aging. Also, due to the high concentration of development and high population density and traffic, the collapse of the sewer will cause enormous social and economic damage. Therefore, proactive maintenance is required to prevent accidents caused by deteriorated sewer pipe. In order to utilize limited budget effectively, risk-based prioritization methods should be proposed that simultaneously consider the consequence of failure and the probability of failure. In this study, the method of risk-based prioritization of sewer was examined by reviewing various cases of overseas studies and applied to the urban sub-catchment. First, the impact factors that can be secured through the sewer GIS DB in Seoul were derived, and the weight, sub-criteria, and impact score of each impact factor were determined and the consequence of failure was calculated by weight sum method. In addition, the probability of failure was calculated by dividing the service life by the estimated useful life, and the consequence of failure and the probability of failure were classified into five grades by the Jenks natural breaks classification method. The prioritization method was applied to sub-catchment in the Seoul to derive a risk matrix and a risk grade. As a result, 26% of all subjects were selected as the inspection priority subjects with 4-5 risk grade. Therefore, using the risk-based CCTV prioritization methodology, it will be possible to systematically determine the objects that need investigation first.

• Journal of the Korean Institute of Gas
• /
• v.16 no.1
• /
• pp.39-45
• /
• 2012

While the natural gas supply industry has continuously been growing, its potential hazard has also risen since the natural gas facilities essentially require installations that carry highly flammable and pressurized gas close to the populated areas, posing a serious consequence of significant property damage as well as human casualties in the event of accident. Therefore Quantitative Risk Assessment (QAR) has been recognized as a appropriate method to reduce the risk as far as possible, considering the reality of unachievable zero-risk. However, it is hard to perform effective QRA on hundreds of gas facilities because of insufficient number of expert and long-term analysis. In this paper, we suggest a conceptual QRA system framework to support more efficient risk analysis in gas supply facilities. In this system, the experts make questionnaires and internal calculation formula needed in accident frequency/consequence analysis of the facility through pre-analysis on the point of analysis, called incident point, and general users locate the point on the map and input the value required by the questionnaire to obtain the risk. Ultimately, this is suggested based on the idea that the specialization is available in QRA analysis process and the validity of the system is verified through actual system construction and application.

• Journal of Distribution Science
• /
• v.14 no.6
• /
• pp.65-73
• /
• 2016

Purpose - Recently, the management conditions of small independent retailers are getting worse everyday as large-scale marts and franchised convenience stores are increasing. The objective of this research is to find out the antecedents and consequences of cooperation in voluntary chain in order to enhance small independent retailer's competitiveness. Voluntary chains, also called affiliation or symbol groups, or allied group represent a high market shared in some European countries like Italy, France, and Germany. Nevertheless, there are still limitations in this research from academic fields. Drawing from network theory, the author investigates the relationship between antecedent factors in voluntary chain cooperation, such as participation benefits, justice of compensation, and autonomy in voluntary chain, and relationship specific asset. The author also attempts to examine the relationship between the relationship specific asset and cooperation of voluntary chain member shop and cooperation and consequence factors of voluntary chain cooperation, such as efficiency, group cohesiveness, and long-term relationship. Research design, data, and methodology - The author presented conceptual framework integrating the major antecedents and consequences of voluntary chain cooperation. The data were collected from 174 independent small retailers who joined K-voluntary chain. K-voluntary chain consists of small independent retailers. In accordance with their status, each entrepreneur associated with the voluntary group can own one or more outlets and can be a part of the life and the decision-making process of the group. This participation is not based on company turnover or on the number of outlets, but based on a one member, one vote system. To verify the research model and test hypotheses, the author carefully investigated the reliability, content validity, convergent validity, and discriminant validity of the proposed model. The data were analyzed by using SPSS 18.0 and AMOS structural equation modeling program. Results - The results of this study are as follows. First, as antecedent variables, participation benefits and justice of compensation have positive effect on the relationship specific assets of voluntary chain members. Second, voluntary chain members' relationship specific asset also directly related to the level of its cooperation to chain headquarter. Third, cooperation of voluntary chain member shop facilitates efficiency, group cohesiveness, and long-term relationship. Unexpectedly, there are no effect autonomy in voluntary chain to relationship specific asset. Conclusions - This research shows several theoretical and practical implications to both marketing scholars and marketers. In terms of theoretical implications, this study applies to network theory and network theory variables to explain the antecedent and consequence factors of cooperation in voluntary chain. From the point of view from business management, most of all, this study shows the way how to reinforce competitiveness of voluntary chain. Specifically, it is necessary for voluntary chain headquarter to give higher level of participation benefit and justice of compensation to its members. Second, the results also indicate what the consequence factors of cooperation in voluntary chain. In other words, to increase the level of marketing efficiency, group cohesiveness, long-term orientation in retail voluntary chain, and chain headquarter need to facilitate participants' cooperation.

• Informatization Policy
• /
• v.25 no.3
• /
• pp.95-115
• /
• 2018

This study aims to examine organization members' intention to violate security policies based on the Person-Environment Fit Model. This study investigated the effect of the relationship between organizational security environment and the individual security value on the intention of organizational security policy violation. The security environments are classified into the organizational information security culture and peers' behavior of security compliance, while the personal values are classified into reconstructing the conduct, distorting the consequence, and devaluing the organization as presented in the moral disengagement theory. Based on the concept of the moral disengagement theory, we measured the individual security values as a second order factor. This study found that the information security culture had a statistically significant impact on devaluing the organization, but did not have as much impact on reconstructing the conduct and distorting the consequence. Peers' behavior of security compliance had a significant impact on reconstructing the conduct, distorting the consequence and devaluing the organization, all of which also had relevant impact on the organizational members' intention of security policy violation.This study measured a persons' perception on security policy breach by presenting scenarios of password sharing that is common in many organizations. This study is expected to make practical contributions, as it deals with challenges that many organizations are actually faced with.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.20-27
• /
• 2003

Hazard Analysis is one of the basic tasks to ensure the safety of chemical plants. However, it is an arduous, tedious, time-consuming work and requires multidisciplinary knowledge and demands considerable cognitive load from the analysts. To overcome these problems, there have been attempts to automate this work by utilizing computer technology, particularly in the area of knowledge-based technique. There is two methods in the risk assessment of Chemical plant; quantitative and qualitative risk assessment. Both of them have been applied respectively, but if the integrated method of quantitative and qualitative risk assessments is used, all of the advantage of two methods can be applied. It is difficult to carry out integrated risk management of chemical plant. Therefore, automated integration system of risk management is necessary. We developed S/W Automated System for Hazard Screening & Analysis(ASCA) and applied to practical plant. By applying ASCA to case study, we can get the information about relative ranks of equipments, variable deviation, and consequence of potential accident. In this study, we applied ASCA to the H.T.U(Hydrotreating Unit) of the process to produce aromatic material. We could know relative ranks of equipments, variable deviation of malfunction in storage tank, D-101, and consequence of potential accident using ASCA. If integrated risk management in the chemical plant is applied, we can develop the emergency plan and prevent the accident.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.42-50
• /
• 2019

As the industry develops in Korea, the use of hazardous chemicals is increasing rapidly and chemical accidents are increasing accordingly. Most of the chemical accidents are caused by leaks of hazardous chemicals, but there are also accidents in which all the substances are released instantaneously due to sudden high temperature/pressure or defection of the storage tanks. This is called catastrophic failure and its frequency is very low, but consequence is very huge when it occurs. In Korea, there were 15 casualties including three deaths due to catastrophic rupture of water tank in 2013, and 64 instances of failures from 1919 to 2004 worldwide. In case of catastrophic failure, it would be able to overflow outside the bund that reduces the evaporation rate and following consequence. This incident is called overtopping. Overseas, some researchers have been studying the amount of external overflow depending on bund conditions in the event of such an accident. Based on the previous research, this study identified overtopping fraction by condition of bund in accordance with Korea Chemicals Controls Act Using CFD simulation. As a result, as the height increases and the distance to the facility decreases while meeting the minimum standard of the bund capacity, the overtopping effect has decreased. In addition, by identifying the effects of overtopping according to atmospheric conditions, types of materials and shapes of bunds, this study proposes the design of the bund considering the effect of overtopping caused by catastrophic failure with different bund conditions.

• Journal of applied mathematics & informatics
• /
• v.17 no.1_2_3
• /
• pp.245-258
• /
• 2005

In this paper we prove that the alternating groups A_n, for n = p, p+1, p+2 and symmetric groups $S_n$, for n = p, p+1, where p$\ge$3 is a prime number, can be uniquely determined by their order components. As one of the important consequence of this characterization we show that the simple groups An, where n = p, p+1, P+2 and p$\ge$3 is prime, satisfy in Thompson's conjecture and Shi's conjecture.

• ETRI Journal
• /
• v.10 no.3
• /
• pp.140-156
• /
• 1988

This paper presents methodological and theoretical principles for constructing a machine thanslation system between Korean and Japanese. We focus our discussion on the real time computing problem of the machine translation system. This problem is characterized in the time and space complexity during the machine translation. The NARA system has the real time computing algorithm which is based on a mathematical model integrating the linguistic competence and the linguistic performance of both languages, with consequence that the system NARA has also the functional characteristic : the two-way translation mechanism.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.52-55
• /
• 1997

This paper discusses an automatic visual-servoing system, in which a laser and a CCD camera are used for imaging the pattern of joint groove. The algorithm used here is simple and robust to find out the gap width and gap center. As a consequence, the speed of algorithm is very fast and optimized. A feature of this system is that it processes only by summing the vertical line and horizontal line of screen without any image preprocessing in order to get the energy information of lines alternatively. It is practical and useful for the system requiring a fast process time of vision.