• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 특별세미나.특별세션
• /
• pp.27-41
• /
• 2008

Construction of metro transportation infra is a large-scale project requiring tremendous financial resources. This study suggests operation method to use for rapid transit line existing infra such as Gyeongbu line and spare line capacity following second phase KTX construction. Reviewing various constraints of metro rapid transit operation, we found that the conditions for metro rapid transit operation are already satisfied in Daegu area, just like the case of Gyeongbu line in Seoul Metro area. Also, the evaluation of the economic feasibility of metro rapid transit operation in Daegu area shows that B/C is about 2.4, which implies that there is sufficient economic feasibility. According to the result of sensitivity analysis, the project is economically feasible unless the passenger demand decreases 15% and construction costs increases more than 70%. B/C is evaluated large because the utilization of already exiting infra lowers the initial cost. As one of mass transportation system of large capacity, metro rapid transit can generate significant spillover effect: It will strengthen competitiveness of metro area by connecting cities within the area and by extending one-day life zone of the area, to say nothing of the benefit of improving traffic condition. The construction of metro rapid transit network is necessary for the mass transportation system of Yeongnam area as well as Daegu area, and it may work as a starting point for uniting Daegu and Gyeongbuk and strengthening regional competitiveness.

• ETRI Journal
• /
• 제31권3호
• /
• pp.254-262
• /
• 2009

This paper presents a novel simple filter design method based on a parallel short-ended coupled-line structure with capacitive loading for size reduction and ultra-broad rejection of spurious passbands. In addition, the introduction of a cross-coupling capacitor into the miniaturized coupled-line can create a transmission zero at the second harmonic frequency for better frequency selectivity and attenuation level. The aperture compensation technique is also applied to achieve a strong coupling in the coupled-line section. The influence of using the connecting transmission line to cascade two identical one-stage filters is studied for the first time. Specifically, such a two-stage bandpass filter operating at 2.3 GHz with a fractional bandwidth of 10% was designed and realized with low-temperature co-fired ceramic technology for application in base stations that need high power handling capability. It achieved attenuation in excess of -40 dB up to $4f_0$ and low insertion loss of -1.2 dB with the size of 10 mm ${\times}$ 7 mm ${\times}$ 2.2 mm. The measured and simulated results showed good agreement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1008-1009
• /
• 2006

There is an application which uses smoothing reacter connecting each of the phases in order to make the system smaller comparison with an application using the insulating transformer in the utility interactive photovoltaic generation system using the PWM converter. In this case, there might be the occurence of the unbalance of output voltage, by the difference of smoothing reactor, connected on each of the lines. Therefore this study proposes that the method which maintains the balance and compensates the unblance which occured by the different volume of the smoothing reactor connected on each of the lines.

• 대한안전경영과학회지
• /
• 제5권2호
• /
• pp.129-143
• /
• 2003

Bsusiness-to- Business transactions requires interactions between diverse application s and business. This gives rise to the need to for a common standard and protocol for exchanging busienss messages. and RosettaNet is the leading industry organization focused on developing B2B process standard for a global supply chain. This paper is intended as an investigation of Build-up Method of SCM Connection applying EC Standard(Rossetta-net) to reduce the integration effort, and improve extensibility and interoperability of an eBusiness infrastructure.-Intiative way for E-commerce applications to quickly incorporate new standards. Supply Chain Management (SCM) helps companies plan and execute supply to meet customer demand. The researches of modem scientists have thrown new light on the subject. but, The study of SCM for EC Standard has been strangely neglected by critics. Consequently, existing SCM system, which require to introduce the functions of EC, needs to be changed. Let me summarize the main points that have been made in this paper. The sharing information for connection and the Rosetta-net standard of the existing SCM system, and PIP 3A4, order management module, of the Rosetta-net specifications for connection by the Rosetta-net. Lastly, That shows the process of the gateway for connecting among the existing SCM systems. This provides felxibility in incorporating any new emerging open standard.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.408-414
• /
• 2012

Screen printing is a printing method that uses a woven mesh to support an ink-blocking stencil by transferring ink or other printable materials in order to form an image onto a substrate. Recently, the screen printing method has applied to micro-electronic packaging by using solder paste as a printable material. For the screen printing of solder paste, metal masks containing a number of micro-holes are used as a stencil material. The metal mask undergoes deformation when it is installed in the screen printing machine, which results in the deformation of micro-holes. In the present study, finite element (FE) analysis was performed to predict the amount of deformation of a metal mask. For an efficient calculation of the micro-holes of the metal mask, the sub-domain analysis method was applied to perform FE analyses connecting the global domain (the metal mask) and the local domain (micro-holes). The FE analyses were then performed to evaluate the effects of slot designs on the deformation characteristics, from which more uniform and adjustable deformation of the metal mask can be obtained.

• 한국음향학회지
• /
• 제31권5호
• /
• pp.309-316
• /
• 2012

본 논문에서는 다중 전압을 사용하는 초소형 시스템 구성 및 모듈 설계 방법론을 제시한다. 특히 잡음에 취약한 아날로그 IC의 특성을 개선하기 위한 PDN 구성 방법과 필터 구성 방법에 중점을 두어 설계하였다. 이에 제작된 모듈은 고전압에 의한 잡음을 방지하기 위해 공급 전원별로 접지면을 분할하고, 이를 공통 접지면으로 구성하기 위해 필터를 연결하였으며, via stitching 기법을 사용하였다. 이를 본 논문에서는 PDN 구조를 Lumped 모델로 구성하여 시뮬레이션을 통해 분석하고, 측정을 통해 확인하였다. 시뮬레이션 결과 4.7 uH의 Inductor를 연결하였을 때, 공통 접지면을 사용했을 때보다 -7 dB의 잡음 감소 효과를 확인할 수 있었고, 측정 결과 약 12 %가 감소하였음을 확인할 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제18권4호
• /
• pp.389-396
• /
• 1997

본 논문에서는 뇌파측정기에서 발생하는 전기적 잡음을 제거하기 위하여 뇌파 측정시 발생하는 안구운동, PVC 룰러 펌프 잡음등을 포함하는 전기적 잡음에 대하여 기술하였다. 적응 디지틀 필터는 이러한 뇌파 측정 잡음을 제거하는 효과적인 방법이다. 그러나 일반적인 적응 디지틀 필터는 뇌파신호의 일부주파수 성분에 영향을 주게되므로 자동 뇌파 처리에는 부적합하다. 그러므로 본 고에서 이러한 뇌파잡음을 제거하기 위하여 제안한 방법은 일반적인 적응디지틀 필터의 참조채널을 사용하지 않으며, EOG 잡음을 제거하기 위하여 선형예측기와 고정차수 FIR 필터를 연결하였으며, 펌프잡음을 제거하기 위하여 선형예측기와 잡음 제거기를 연결함으로써 실현하였다. 또한 시뮬레이션을 통한 결과는 잡음제거 능력의 관점에서 제안한 방법의 성능을 분석하였으며, 결과적으로 약 20dB의 잡음제거 성능을 보였다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권1호
• /
• pp.44-51
• /
• 2003

The module UPS can flexibly implement expansion of power system capacities. Further-more, it can be used to build up the parallel redundant system to improve the reliability of power system operation. To realize the module UPS, load sharing without interconnection among parallel connecting modules as well as a small scale and lightweight topology is necessary. In this paper, the three-arm converter/inverter is compared with the general full-bridge and half-bridge topology from a practical point of view and chosen as the module UPS topology. The switching control approaches based on a pulse width modulation of the converter and inverter of the system are presented independently. The frequency and voltage droop method is applied to parallel operation control to achieve load sharing. Two prototype 3㎸A modules are designed and implemented to confirm the effectiveness of the pro-posed approaches. Experimental results show that the three-arm UPS system has a high power factor, a low distortion of output voltage and input current, and good load sharing characteristics.

• Structural Engineering and Mechanics
• /
• 제74권3호
• /
• pp.381-394
• /
• 2020

The structural performance of cold-formed steel (CFS) built-up battened columns were numerically investigated in this paper. The built-up column sections were formed by connecting two-lipped channels back-to-back, with a regular spacing of battens plates, and have been investigated in the current study. Finite element models were validated with the test results reported by the authors in the companion paper. Using the validated models, the parametric study was extended, covering a wider range of overall slenderness to assess the accuracy of the current design rules in predicting the design strengths of the CFS built-up battened columns. The parameters viz., overall slenderness, different geometries, plate slenderness (b/t ratio) and yield stress were considered for this study. In total, a total of 228 finite element models were analyzed and the results obtained were compared with current design strength predicted by Effective Width Method of AISI Specifications (AISI S100:2016) and European specifications (EN1993-1-3:2006). The parametric study results indicated that the current design rules are limited in predicting the accuracy of the design strengths of CFS built-up battened columns. Therefore, a design equation was proposed for the AISI and EC3 specifications to predict the reliable design strength of the CFS Built-up battened columns and was also verified by the reliability analysis.

• 대한치과기공학회지
• /
• 제40권1호
• /
• pp.41-47
• /
• 2018

Purpose: The purpose of this study was to analyze the biomechanical properties of the dental implants on the supporting bone using three-dimensional finite element method when three different abutment materials were applied to the implant system. Methods: Three different dental implant models were fabricated by applying Ti, PEEK, and CRE-PEEK (60% carbon-reinforced PEEK) to abutment material. The abutment and connecting screw from the fixture was applied with a tightening torque of 20 Ncm. And then, total loads of 150 N were applied in an $30^{\circ}oblique$ direction (to the vertical). The structural stability of dental implants on the supporting bone was analyzed using Von Mises stress and principal stress values. Results: The maximum tensile stress of the cortical bone was highest at 12.6 MPa in the PEEK abutment (Model-B). Ti abutment (Model-A) and CRE-PEEK abutment (Model-C) showed similar stress distributions (10.6 and 10.3 MPa, respectively). And the maximum compressive principal stress was similar in all models. The Von Mises stress value delivered to the bone around the implant was highest at 16.5 MPa in Model-B. On the other hand, Model-A and C showed similar stress distributions (14.0 and 13.8 MPa, respectively). In addition, the maximum equivalent stress applied to the abutment was highest at 629.8 MPa in Model-A. The stress distribution in Model-C was 573.9 MPa. Whereas, Model-B showed the lowest value at 165.6 MPa. Conclusion : The dental implant supporting bone system using PEEK material seems to have the possibility of supporting bone fracture. It was found that the CRE-PEEK abutment can reduce the elastic deformation and reduce the stress value of the interfacial bone.