• Journal of Fashion Business
• /
• v.21 no.2
• /
• pp.61-77
• /
• 2017

Although three-dimensional measurement systems for the human body have been studied, there is still an error between the measurements by the two-dimensional measurement method and the three-dimensional scanning method. Especially, in the case of the breast, the outline is not clear. The breast is made up of subcutaneous fat and mammary gland tissue, and it is easy to deform, making it difficult to grasp the exact shape. It is also more difficult to measure photogrammetry or three-dimensional measurement because it is difficult to obtain subjects because of the shame they are reluctant to expose. In this study, the angle and length of the line connecting the measurement points of the breast detail measurement items were compared with the unchanged measurement items such as breast width and center front length using the frontal and lateral photographs taken before and after breast enlargement surgery. The results of the study are as follows. The types of breast before and after surgery were classified into two groups and showed high accuracy rate. Therefore, it was possible to classify the breast type using the frontal and lateral views of the breast, and it was found that The PRM method can distinguish the characteristics of the breast type. Therefore, it can be useful for classifying and discriminating breast types.

• Korean Journal of Food Science and Technology
• /
• v.27 no.2
• /
• pp.266-269
• /
• 1995

In order to measure alcohol contents with speed and accuracy, alcohol sensor was prepared. Alcohol sensor was made by connecting with oxygen electrode after immobilized alcohol oxidase on nylon net with glutaraldehyde. Alcohol was determined by changing the rate of dissolved oxygen consumption using D.O. analyzer. Alcohol contents in alcoholic beverages were determined under the optimum conditions. The results were 0.71% in low-alcohol beverage, $4{\sim}5%$ in beers, 10.06% in wine, 16.12% in chungju, 25.71% in soju, and 6.18% in takju, respectively. The values by alcohol sensor showed an excellent correlation(r=0.999) with GC method.

• Tribology and Lubricants
• /
• v.21 no.4
• /
• pp.165-170
• /
• 2005

Engine lubrication system has very complex oil flow networks. Therefore it is difficult to evaluate and optimize the system only depending on experimental results. When we plan upgrading the engine performance the engine lubrication system must be considered in the plan. In this paper, engine lubrication system design using computational fluid dynamic analysis was studied. To do this, unsteady transient flow network analysis on the engine oil circuit system was carried out. Finally we discussed the design process in the modified engine lubrication system.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.2
• /
• pp.53-57
• /
• 2009

The dividing flow in an open channel has a number of distinctive characteristics. One of these is that the separation zone interacts with a secondary motion along the inner wall of a branch channel, generating sediment accumulation. To investigate this phenomenon, a two-dimensional numerical model based on the shallow-water equations, RMA2, which calculates water surface elevations and horizontal-velocity components, was used to analyze the dividing flow. The obtained numerical results fully coincide with the laboratory measurements reported by Hsu et al.(2002). For the analysis of the numerical results, a separation zone-discharge rate relationship was proposed. To reduce the size of a separation zone, the topographies of diagonal and curved edges were proposed, smoothly connecting the upstream corner to branch channel.

• Electronics and Telecommunications Trends
• /
• v.33 no.5
• /
• pp.24-32
• /
• 2018

With the advent of new convergence services, the requirements of 5G mobile communication systems are being newly derived. The 5G mobile communication system has been evolving to solve requirements that cannot be satisfied with existing 4G mobile communication systems, such as a high user experience transmission rate, short transmission delay, and high connection density. The evolution of a 5G mobile communication system to meet the new requirements is expected to be dominated by the UDN environment in which a number of small cells are concentrated. The 5G wireless backhaul system, which has advantages in terms of initial installation and operation cost, is expected to be an indispensable choice for connecting many small cells and core networks. This paper therefore looks at the frequency band characteristics and requirements applicable to 5G wireless backhaul systems that can accommodate new situations, and introduces key related technologies that can satisfy the 5G wireless backhaul requirements.. In addition, we describe the research and development trends of a 5G wireless backhaul system that is currently under development.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.443-450
• /
• 2014

This paper presents a 20-Gb/s optical receiver circuit fabricated with standard 65-nm CMOS technology. Our receiver circuits are designed with consideration for parasitic inductance and capacitance due to bonding wires connecting the photodetector and the circuit realized separately. Such parasitic inductance and capacitance usually disturb the high-speed performance but, with careful circuit design, we achieve optimized wide and flat response. The receiver circuit is composed of a transimpedance amplifier (TIA) with a DC-balancing buffer, a post amplifier (PA), and an output buffer. The TIA is designed in the shunt-feedback configuration with inductive peaking. The PA is composed of a 6-stage differential amplifier having interleaved active feedback. The receiver circuit is mounted on a FR4 PCB and wire-bonded to an equivalent circuit that emulates a photodetector. The measured transimpedance gain and 3-dB bandwidth of our optical receiver circuit is 84 $dB{\Omega}$ and 12 GHz, respectively. 20-Gb/s $2^{31}-1$ electrical pseudo-random bit sequence data are successfully received with the bit-error rate less than $10^{-12}$. The receiver circuit has chip area of $0.5mm{\times}0.44mm$ and it consumes excluding the output buffer 84 mW with 1.2-V supply voltage.

• Journal of Environmental Science International
• /
• v.21 no.10
• /
• pp.1203-1212
• /
• 2012

Yongsan ward is located at central place connecting south and north ecology axis of seoul. Various environment-friendly Yongsan development could pose positive effects on NPS(non pollutant source) pollutant reductions and water quality improvement at Han-rive because BOD, T-N, and T-P NPS discharges took 90% of total pollutant from this area. In this study, direct runoff and NPS pollutant loads were evaluated before and after development using spatio-tamporal change in CN(curve number) and EMC(event mean concentration) data. It was found that direct runoff value is $23,584,724m^3$, and BOD, T-N and T-P loads are 104,456 kg/year, 111,483 kg/year and 7,500 kg/year under pre-development condition, respectively. Annual runoff, BOD, T-N and T-P reducing rate were 12.9%, 33.3%, 35.6% and 40.7% under integrated post-development condition, respectively. Based on the results obtained in this study, environment-friendly urban development could be achieved at Yongsan area.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.683-684
• /
• 2016

The up-to-date high-performance DSP or FPGA employs SRIO(Serial Rapid IO) as a high-speed serial communications. SRIO is an industry standard regulated upto Ver 3.1. In this study we developed a backplane having a transmission rate to 15Gbps based on a TI DSP. The back plane icould be used to High-speed video transmission, and will be adopted to connecting multiple DSPs for scalable architecture. This paper will discuss the design constraints for a high-speed communication and multiple-core operation.

• Journal of Communications and Networks
• /
• v.13 no.2
• /
• pp.132-141
• /
• 2011

IEEE 802.15.4 networks are a feasible platform candidate for connecting all health-care-related equipment dispersed across a hospital room to collect critical time-sensitive data about patient health state, such as the heart rate and blood pressure. To meet the quality of service requirements of health-care systems, this paper proposes a multi-priority queue system that differentiates between various types of frames. The effect of the proposed system on the average delay and throughput is explored herein. By employing different contention window parameters, as in IEEE 802.11e, this multi-queue system prioritizes frames on the basis of priority classes. Performance under both saturated and unsaturated traffic conditions was evaluated using a novel analytical model that comprehensively integrates two legacy models for 802.15.4 and 802.11e. To improve the accuracy, our model also accommodates the transmission retries and deferment algorithms that significantly affect the performance of IEEE 802.15.4. The multi-queue scheme is predicted to separate the average delay and throughput of two different classes by up to 48.4% and 46%, respectively, without wasting bandwidth. These outcomes imply that the multi-queue system should be employed in health-care systems for prompt allocation of synchronous channels and faster delivery of urgent information. The simulation results validate these model's predictions with a maximum deviation of 7.6%.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.663-665
• /
• 2000

We fabricated resistive superconducting fault current limiters (SFCL) based on YBCO thin films grown on 2-inch diameter saphire substrates Two SFCLs with nearly identical properties were connected in series to investigate the simultaneous quench. There was a slight difference in the rate of voltage increase between two SFCL units when they were operated independently. This difference. however, resulted in significantly unbalanced power dissipation between the units. This imbalance was removed by connecting a shunt resistor to an SFCL in parallel. The appropriate values of the shunt resistances were $80{\Omega}$ at $75 V_{rms}$. $100{\Omega}$ at $100 V_{rms}$ and $110{\Omega}$ at $120 V_{rms}$, respectively. Increased power input at high voltages also reduced the initial imbalance in power dissipation. but with increase in film temperature to higher than 200 K.