• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.5
• /
• pp.1068-1072
• /
• 2011

Hydrogen Fuel Cell Vehicle(HFCV) is system that uses electrical energy of fuel cell stack to main power source, which is different system with other vehicles that use high-voltage, large-current. Isolation performance of this system which is connected with electrical fire and electrical shock is important point. Isolation resistance of electric installation is divided according to working voltage, it follows criterion more than $100{\Omega}$/VDC (or $500{\Omega}$/VAC) about system operation voltage in a hydrogen fuel cell vehicle. Although measurement of isolation resistance in a hydrogen fuel cell vehicle is two methods, it uses mainly measurement by megger. However, the present isolation resistance measurement system that is optimized to use in electrical facilities is unsuitable for isolation performance estimation of a hydrogen fuel cell vehicle because of limit of maximum short current and difference of measurement resolution. Therefore, this research developed the isolation resistance measurement system so that may be suitable in isolation performance estimation of a hydrogen fuel cell vehicle, verified isolation performance about known resistance by performance verification of laboratory level about developed system, and executed performance verification through comparing results of developed system by performance verification of vehicle level with ones of existing megger. Developed system is judged to aid estimation and upgrade of isolation performance in a hydrogen fuel cell vehicle hereafter.

• Journal of the Korean Society of Safety
• /
• v.29 no.5
• /
• pp.40-46
• /
• 2014

This paper deal with due to the additional equipment established on the vehicle fire accident cases. Recently, vehicle was recognized as other living spaces and it was increasing installation of additional devices such as a black box, multivision, additional battery and so on. However, these additional devices were established on the vehicle by non-specialists such as the general public user or manufacturing and distributors of additional devices since the vehicle factory. Resulting from the additional equipments due to installation errors in these additional equipments connected to the electrical wiring insulation damage or electrical breakdown occurs, and finally leading to a fire caused by the additional equipments. Therefore, additional equipment established on the vehicle due to a fire in order to prevent accidents during the manufacturing process of these devices are installed. If not installed unless the manufacturing process, the installation of additional equipments established by professional who knows the vehicle structure that will be able to prevent the fire.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.330-335
• /
• 2002

To estimate the reliability of the standard electric multiple unit developed by Korea Railroad Research Institute, the vehicle system composed of 4 cars is divided into 14 subsystems. The 14 subsystems are connected in series. For each subsystem except for car body and bogie, failure rate is evaluated by an optimal failure model used in reliability engineering. For car body and bogie probabilistic structural integrity analysis is carried out. The distribution of failure rate of each part and system is assumed to be exponential. The estimated MTBF of the vehicle satisfies the planned MTBF.

• Journal of Biosystems Engineering
• /
• v.21 no.4
• /
• pp.422-428
• /
• 1996

This study was conducted to developed to develop a simple battery-powered autonomous vehicle for greenhouse works. A steering method using speed difference of two independent driving motors was adopted. DC motor driving circuit, speed control circuit and controller using one-chip microcomputer were constructed. The inputs of controller are rolling of the vehicle and current speed of driving motors. Using these signals, automatic guidance system along furrow was developed. A computer simulation program by the kenematic analysis was developed to find out optimal control algorithm. The results of this study are as follows. 1. Automatic guidance system along the furrow that adopted two independent driving motors and rolling of vehicle was developed. 2. The results of simulation showed that PID control was adequate to automatic guidance system along furrow. 3. Two commercial 12V battery serially connected were able to drive the vehicle on the soil ground for five hours in continuous operation and for four hours in intermittent operation without recharging the battery. 4. The speed range was 0-0.7m/s and the rolling of vehicle could be controlled within $pm5^{\circ}$ range. 5. From a series of tests, developed vehicle was found to be a useful tool for greenhouse works.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.812-828
• /
• 2010

A fuel injection system using an ECU HILS as an alternate to a vehicle test for the fuel injectors was developed. The throttle position, vehicle speed, engine speed, crank position, cam position, intake air flow, and several other sensor signals that are supplied to the ECU were measured and recorded as a data file for a vehicle driven in the FTP-75 mode in a chassis dynamometer. Electric signals that are equivalent to the sensor signals from the vehicle are reconstructed from the recorded data file using data acquisition boards, microprocessors, and computers. All sensor signals are supplied to the ECU with synchronized timing using a computer program. The findings show that the cost and time of vehicle experiments can be reduced using the ECU HILS system. Moreover, the repeatability of the generation of sensor signals can enhance the accuracy of a range of experiment related to vehicle testing. An ECU scanner that scans the sensor signals that are input to the ECU through a serial port was used to assess the accuracy of the reconstructed signals. The scanning results show good agreement with the reconstructed input signals. Injectors were connected to the ECU HILS system and were driven by the system to measure the quantity of injected fuel.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.78-81
• /
• 2011

Generally, vehicle is insulated from the earth by rubber tire which is intrinsically the insulation material. The electrical ground of vehicle was floated in the sense of electric potential over the electric power sources. First of all, the floated electrical ground of vehicle should be equipotentially connected with the (-) line of electrical equipment. Bimodal tram has the different kinds of electric system. They must be kept insulated to each other electrically. When there is some unbalanced event or connection between them, it will invoke some errors or breakdown to electrical devices including sensors and actuators. This paper has investigated the floating ground effect of bimodal tram built with composite body and shown the effect according to the unbalanced ground of vehicle and the connection between different electric systems.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.85-90
• /
• 2005

The advance of mobile and telematics technologies has produced vehicles with various convenient services for drivers. Specifically lots of researches and several technologies have been developed to provide services of a remote vehicle diagnosis and control. The existing and representative product for a vehicle control is a RCS (remote control system), but it has a problem of short control distance and fragile security. In this paper, a telematics terminal embedded with CDMA and GPS is designed, which can be connected to the Internet. It allows a driver with a cellular phone to remotely diagnosis and control a vehicle via wireless network and SMS.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.3
• /
• pp.1-15
• /
• 2005

In our model, a fleet of vehicles start from docking point to collect loads at the terminals assigned to the point Then the docking points are connected to the hub by primary vehicle routes starting at the hub. This vehicle visit all the docking points to collect the loads which have been collected by the secondary vehicles. Our goal Is to minimize the long-run cost of setting up the docking Points and vehicle operation cost by deciding the location of the docking points and the routes optimally. We propose an heuristic algorithm to solve this and tested it though various experiments.

• Journal of Sensor Science and Technology
• /
• v.18 no.5
• /
• pp.393-401
• /
• 2009

This paper describes development of a new displacement sensor for intelligent suspension system in which the damping force has been controlled by MR fluid. Most of the current vehicle height sensors have been installed at external place of the damper and connected to that by mechanical linkages so far. The developed sensor has a new mechanism which detects movement of the sensor rod same as connecting rod in the suspension damper by using a GMR Sensor and converts it to the relative displacement from an initial position.

• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.65-73
• /
• 2013

PURPOSES: This paper presents the results of computer simulations of roadside safety barrier, called by safety roller guardrail, consisting of rotational roller, rotation control plate, post and subsidiary members. The rotation roller and rotation control plate are made by EVA(ethylene vinyl acetate), and PE(polyester), respectively. METHODS: The occupant risk analysis has been carried out under vehicle crash condition for high containment level of SB-4 for the purpose of local road. Simulations are performed with the finite element code LS/DYNA-3D. RESULTS: The numerical results obtained by LS/DYNA-3D software from the viewpoints of vehicle stability, vehicle trajectory, occupant risk, etc. CONCLUSIONS: It is noted that not only impact severity is drastically reduced but also vehicle trajectory is improved due to the characteristics of energy absorption and rotation pattern of EVA rollers connected by control plates.