• Conservation Science in Museum
• /
• v.8
• /
• pp.3-11
• /
• 2007

There is a Seated Stone Bhaishajyaguru-Vaidurya Buddha (Medicine Buddha) which was moved from Yongjang-gye in the garden of Gyeongju National Museum. The head was cemented on the body of the statue in 1974 before its display. Recently, we have done another conservation work on the statue because microbes and the other contaminants have built up on the surface and the restored part of the statue has loosened again. By taking r-ray pictures, we have checked the structure of the statue, especially the connected part and removed old materials used for the previous restoration. We reinforced the cracked parts, cleaned the surface, and then restored the statue. We finished the conservation process by adjusting the color.

• Journal of computational fluids engineering
• /
• v.2 no.1
• /
• pp.117-128
• /
• 1997

Effects of dam and weir on the fluid flow and behavior of inclusions in the continuous casting tundish have been studied using the CFD (Computational Fluid Dynamics) technique. Inclusions affecting the quality of steel products have been considered to be passive: the fluid flow has been obtained for unstaggered grid points defined on body-fitted generalized cuvilinear coordinates with no attention on inclusions, and the spatial propagation of inclusions has been determined by using the flow field data. The result show that the dam and weir direct the flow to the free surface and increase the residence time of inclusions significantly, and thereby that inclusions have much more chance to be floated to the free surface of the tundish where it is eliminated. It is also found that they offer more margin on the geometric design of exit nozzles connected to moulds. This finding is particularly important for twin casting operations where the quality of steel products from the two moulds be kept uniformly.

• Journal of Sensor Science and Technology
• /
• v.25 no.3
• /
• pp.208-212
• /
• 2016

In this work, a loop sensor for Arc-Flash detections has been developed in order to trip a circuit breaker within 2.5 ms after an Arc-Flash event. For an efficient capturing of the flash light, plastic optical fibers, where light attenuations are larger than those in silica-based ones, with different diameters and surface conditions were utilized. The performance was comparatively analyzed with those of a point sensor and a commercialized product. The point sensor module was designed for hemisphere-like capturings of Arc-Flashes larger than 3 kA at 2 meters from the sensor. On the other hand, the loop sensor allowed 360-degree-detections around the fiber axis and the measurement range was dependent on the length of the fiber connected to the sensor module. The trip-level-dependent brightness measurement results showed that the fabricated point sensor and loop sensor satisfied a brightness condition, 10~40 klux, and the responses of the system to Arc-Flashes were completed within 2.5 ms.

• The Journal of Korean Physical Therapy
• /
• v.18 no.1
• /
• pp.83-94
• /
• 2006

Purpose: This study conducts quantitative evaluation or structural and functional characteristics or normal skeletal muscle with ultrasound image and surface electromyography, and is to provide basic materials for utilizing ultrasound image analysis in physical therapy diagnosis and assessment of skeletal muscle. Methods: Measurement of three stages was conducted with 88 normal adults between their twenties and seventies, correlations and differences using collected data according to age and gender were compared and correlations among measured items were analyzed and then the following conclusions were obtained. Results: Analysis of ultrasound image of normal skeletal muscle showed that density, median frequency had the closest relations with age. In addition, it was found that there were high correlations between density explaining structural characteristics of skeletal muscle and median frequency explaining functional characteristics. Conclusion: Analysis of ultrasound image makes complex evaluation of structure and function of skeletal muscle possible when it is connected with functional evaluation method using physical measurement surface electromyography as well as quantitative evaluation of structural changes of skeletal muscle and is effective in complementing physical therapy diagnosis centering around functionality evaluation.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.3
• /
• pp.301-309
• /
• 2015

Objective : The purpose of this study was to describe the correlation between the activity of the muscles of upper and lower limbs of a golf driver swing according to shoulder injury. Method : The subjects were 18 professional golfers (7 male in KPGA and 11 female in KLPGA). Using surface electromyography, we evaluated muscle activities during the golf drive swing. Surface electrodes were used to record the level of muscle activity in the left Deltoid(MD), Triceps Brachii(TB), Pectoralis(PM), Trapezius(UT), Rectus Femoris(RF), Vastus Medialis Obilique(VMO), Biceps Femoris(BF), Gastrocnemius(GCM) muscles during the golfer's swing. The golf swing was divided into five phases: take away, forward swing, acceleration, early follow through, late follow through. Results : The results can be summarized as follows: MD, VMO had statistically significant difference in take away phases, GCM had statistically significant difference in acceleration phases, MD, PM, VMO had statistically significant difference in early follow through phases, PM had statistically significant difference in late follow through phases, Conclusion : Muscle activity of the 8 muscles(Deltoid, Triceps Brachii, Pectoralis, Trapezius, Rectus Femoris, Vastus Medialis Obilique, Biceps Femoris, Gastrocnemius) along the shoulder damage or absence of has shown that they are organically connected to each of the phases.

• Computers and Concrete
• /
• v.21 no.4
• /
• pp.441-449
• /
• 2018

FE models for complex or large-scaled structures that need detailed modeling of structural components are usually constructed using commercial analysis softwares. Updating of such FE model by conventional sensitivity-based methods is difficult since repeated computation for perturbed parameters and manual calculations are needed to obtain sensitivity matrix in each iteration. In this study, an FE model updating procedure avoiding such difficulties by using response surface (RS) method and a Pareto-based multiobjective optimization (MOO) was formulated and applied to FE models constructed with a commercial analysis package. The test building is a low-rise reinforced concrete building that has been seismically retrofitted. Dynamic properties of the building were extracted from vibration tests performed before and after the seismic retrofits, respectively. The elastic modulus of concrete and masonry, and spring constants for the expansion joint were updated. Two RS functions representing the errors in the natural frequencies and mode shape, respectively, were obtained and used as the objective functions for MOO. Among the Pareto solutions, the best compromise solution was determined using the TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) procedure. A similar task was performed for retrofitted building by taking the updating parameters as the stiffness of modified or added members. Obtained parameters of the existing building were reasonably comparable with the current code provisions. However, the stiffness of added concrete shear walls and steel section jacketed members were considerably lower than expectation. Such low values are seemingly because the bond between new and existing concrete was not as good as the monolithically casted members, even though they were connected by the anchoring bars.

• Journal of the Korean Mathematical Society
• /
• v.47 no.5
• /
• pp.967-983
• /
• 2010

Let M be an n-dimensional complete simply connected Riemannian manifold with sectional curvature bounded above by a nonpositive constant $-{\kappa}^2$. Using the cone total curvature TC($\Gamma$) of a graph $\Gamma$ which was introduced by Gulliver and Yamada [8], we prove that the density at any point of a soap film-like surface $\Sigma$ spanning a graph $\Gamma\;\subset\;M$ is less than or equal to $\frac{1}{2\pi}\{TC(\Gamma)-{\kappa}^2Area(p{\times}\Gamma)\}$. From this density estimate we obtain the regularity theorems for soap film-like surfaces spanning graphs with small total curvature. In particular, when n = 3, this density estimate implies that if $TC(\Gamma)$ < $3.649{\pi}\;+\;{\kappa}^2\inf\limits_{p{\in}F}Area(p{\times}{\Gamma})$, then the only possible singularities of a piecewise smooth (M, 0, $\delta$)-minimizing set $\Sigma$ are the Y-singularity cone. In a manifold with sectional curvature bounded above by $b^2$ and diameter bounded by $\pi$/b, we obtain similar results for any soap film-like surfaces spanning a graph with the corresponding bound on cone total curvature.

• Journal of Veterinary Clinics
• /
• v.18 no.4
• /
• pp.311-314
• /
• 2001

To elucidate the effect of dorsal acupoints for canine electroacupuncture anesthesia, mongrel dogs(6 heads: 2.6-10.5kg, 3 males and 3 females) were used. After needling perpendicularly to Tian-Ping(GV-5) and Bai-Hui(GV-20), the electrodes were connected with positive to Tian-Ping and negative to Bi-hui, respectively using with veterinary electroacupuncture apparatus(TEC AM-3000). The electric conditions were 2-4V and 30 Hz. The pain of body surface was checked by hemostatic forceps. The effect of electroacupuncture andesthesia was appreciated by application of laparotomy(2 heads), ear trimming and tail amputation(1 head), castration(2 heads) and enterotomy(1 head), respectively. Induction time, clinical findings and operation findings were investigated under the electroacupuncture anesthesia. The induction time of electroacupuncture anesthesia was very rapid, approximately 1 minute and the pain of body surface including the extremities was not detected. As for clinical findings during electroacupuncture anesthesia, consciousness was evident, pupil reflex was weak and blepharoreaction was existed. As for operation findings, pain was not detected during incision and suture, and bleeding was relatively small volume. The grade of electroacupuncture anesthesia was excellent in all cases applied with ear trimming and tail amputation, laparatomy, castration and enterotomy. Considering above all findings, it was thought that electroacupuncture stimulation at Tian-Ping and Bai-hui examined in the present study induced excellent electroacupuncture anesthesia for dogs.

• Journal of Korean society of Dental Hygiene
• /
• v.7 no.4
• /
• pp.471-479
• /
• 2007

The purpose of this study was to examine the optimum condition of impulse during the anodic spark oxidation applying pulse current as well as to find the excellent condition for HA precipitation the after electrochemical hydrothermal treatment by cathode reduction method. After anodic spark oxidation, the anodized specimen and the Pt plate connected cathode and anode, respectively. Hydrothermal treatment performed at 90, 120, $150^{\circ}C$ for 2 hours in the electrolyte containing $K_2HPO_4$, $CaCl_2{\cdot}2H_2O$, Tris(Hydroxymethyl)-$(CH_2OH)_3\;CNH_2$(Aminomethane), and NaCl. The optimum impulse voltage for anodic spark oxidation was 350V. The optimum pulse cycle measured at 10 mS. The HA crystals precipitated excellently by cathode reduction at $150^{\circ}C$ for 2 hours. The phases of anatase, rutile, and HA coating on the surface of modified titanium surface immersed in Hanks' solution for 3weeks were detected by XRD measurement and the intensity of HA crystal phase has increased by temperature and time of hydrothermal treatment. According to the our experiments, we found that Pure Ti will be good materials of bioactivity and biocompatibility.

• Clean Technology
• /
• v.12 no.4
• /
• pp.224-231
• /
• 2006

Collection efficiencies and pressure drops for the removal of small particles from dilute liquid suspensions by granular bed filter were calculated using network model. The network model is composed of a number of nodes connected with cylindrical bond and particles are deposited on the bond surface. The collection efficiency of each cylindrical bond was predicted using unit cell model corresponding to the pore volume of cylindrical pore both at the initial and transient states. Deposited particles on the collector surface may act as additional collector and reduce the pore size of the collector. As a result, the collection efficiency was improved and pressure drop increased with deposition. Even though the stochastic nature of network requires a large number of simulation work, the model proposed in this study can be used in investigating collection efficiency and pressure drop.