• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권3호
• /
• pp.104-109
• /
• 1999

In order to design and predict the performance of the harmonic side drive motor, it is necessary to analyze the torque generated by the structure. In this paper, an analytical model is proposed for design. Conformal mapping is used to model the capacitance and torque of the motor as a function of the rotor angular position with two-dimensional approximation. Then the result of conformal mapping analysis is verified with F.E.M result.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.1973-1983
• /
• 1997

Higher order isoparametric elements are usually used in the finite element analysis because they can represent easily the geometric shape of a complex structure ad can improve the solution quality. When these elements are used, the position of internal nodes affects greatly on the solution accuracy. Decreasing of the accuracy related to the position of internal nodes is due to non-conformal mapping often results in an unstable Jacobian value. This paper, in order to remove this difficulty, suggests a modified shape function which can establish conformal mapping between two coordinate systems. Numerical experiments with the proposed shape function show that a stable solution can be obtained without respect to the position of internal nodes, and offer convenience that one can take arbitrarily the position of internal nodes considering only the geometric shape of element boundaries.

• 정보처리학회논문지A
• /
• 제14A권1호
• /
• pp.73-76
• /
• 2007

단위원의 내부로부터 Jordan 영역으로의 등각사상을 구하는 것은 일반적으로 비선형방정식인 Theodorsen 방정식을 푸는 것으로 귀결된다. 저자는 이 비선형 방정식의 수치적 해법 중 가장 효율적인 방법으로 알려진 Wegmann의 해법에 저주파 필터를 적용하여 개선하고 새로운 산법의 수렴성을 이론적으로 증명한 바 있다[1, 2]. 또한 이 해법에 있어 참값을 모르더라도 오차평가가 가능한 방법을 제안하였다[3]. 본 논문에서는 참값을 모르더라도 오차평가가 가능한 연구결과를 이용하여 주어진 문제영역과 허용오차에 따라 자동으로 수치등각사상이 결정되는 알고리즘을 제안한다. 이 알고리즘에서는 지금까지 경험에 의존했었던 표본수와 저주파 필터 파라메터가 주어진 문제영역에 따라 자동으로 결정된다. 이것은 문제의 난이도가 문제영역의 변형에 의존한다는 전제로 문제영역의 모양을 결정하는 함수를 Fourier 급수로 전개, 분석하여 얻을 수 있다. 수치실험을 통해 그 유효성을 입증한다.

• Journal of applied mathematics & informatics
• /
• 제20권1_2호
• /
• pp.595-602
• /
• 2006

Determinations of conformal map from the unit disk onto a Jordan region are reduced to solve the Theodorsen equation which is an integral equation for the boundary correspondence function. Among numerical conformal maps the Wegmann's method is well known as a Newton efficient one for solving Theodorsen equation. However this method has not so wide class of convergence. We proposed as an improved method for convergence by applying a low frequency filter to the Wegmann's method. In this paper, we investigate error analysis and propose an automatic algorithm based on this analysis.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.1018-1025
• /
• 1999

For the effective analysis of two dimensional plane problems with geometrical discontinuities, singular finite element has been proposed. The element matrix equation was formulated on the basis of hybrid variational principle and Trefftz function sets derived consistently from the complex theory of plane elasticity by introducing a conformal mapping function. In order to suggest the accuracy characteristics of the proposed singular finite element, typical plane problems were analyzed and these results were compared with exact solutions. The singular finite element gives the comparatively exact values of stress concentration factors or stress intensity factors and can be effectively used for the analysis of mechanical structures containing various geometrical discontinuities.

• 대한기계학회논문집A
• /
• 제23권6호
• /
• pp.988-1000
• /
• 1999

An experimental study is presented for the effect of number of terms of a pewee series type stress function on stress analysis around a hole in tensile loaded plate. The hybrid method coupling photoelastsic data inputs and complex variable formulations involving conformal mappings and analytical continuity is used to calculate tangential stress on the boundary of the hole in uniaxially loaded, finite width tensile plate. In order to measure isochromatic data accurately, actual photoelastic fringe patterns are two times multiplied and sharpened by digital image processing. For qualitative comparison, actual fringes are compared with calculated ones. For quantitative comparison, percentage errors and standard deviations with respect to percentage errors are caculated for all measured points by changing the number of terms of stress function. The experimental results indicate that stress concentration factors analyzed by the hybrid method are accurate within three percent compared with ones obtained by theoretical and finite element analysis.

• Wind and Structures
• /
• 제35권4호
• /
• pp.243-253
• /
• 2022

The conformal mapping method (CMM) has been broadly exploited in the study of fluid flows over airfoils and other research areas, yet it's hard to find relevant research in bridge engineering. This paper explores the feasibility of CMM in streamlined box girder bridges. Firstly, the mapping function transforming a unit circle to the streamlined box girder was solved by CMM. Subsequently, the potential flow solution of aerostatic pressure on the streamlined box girder was obtained and was compared with numerical simulation results. Finally, the aerostatic pressure attained by CMM was utilized to estimate the aerostatic coefficient and flutter performance of the streamlined box girder. The results indicate that the solution of the aerostatic pressure by CMM on the windward side is satisfactory within a small angle of attack. Considering the windward aerostatic pressure and coefficient of correction, CMM can be employed to estimate the rate of change of the lift and moment coefficients with angle of attack and the influence of the geometric shape of the streamlined box girder on flutter performance.

• 충청수학회지
• /
• 제20권2호
• /
• pp.147-156
• /
• 2007

We introduce the extremal length and examine its properties. And we consider the geometric applications of extremal length to the boundary behavior of analytic functions, conformal mappings. We derive the theorem in connection with the capacity. This theorem applies the extremal length to the analytic function defined on the domain with a number of holes. And we obtain the theorems in connection with the pure geometric problems.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제8권1호
• /
• pp.81-92
• /
• 2004

Muskhelishvili's complex variable method has been applied to derive exact and closed expressions for Gaursat's functions for the first and second fundamental problems of the infinite plate weakened by a curvilinear hole which is conformally mapped on the domain outside the unit circle by means of rational mapping function. The hole having three poles. The previous work of the authers in this domain is considered as special cases of this work.

• 호남수학학술지
• /
• 제27권2호
• /
• pp.195-203
• /
• 2005

We show that the exact Bergman kernel function associated to a $C^{\infty}$ bounded domain in the plane relates the derivatives of the Ahlfors map in an explicit way. And we find several formulas relating the exact Bergman kernel to classical kernel functions in potential theory.