• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.567-567
• /
• 2003

The purpose of this study was to evaluate the effect of multiple application of all-in-one dentin adhesive system on microtensile bond strength using confocal laser scanning microscope and microtensile bond strength test. The dentin surface of human molars, sectioned to remove the enamel from the occlusal surface were prepared. In group I, Scotchbond Multipurpose(SM, 3M ESPE) was applied by manufature's recommended. In group II, after the all-in-one adhesive, Adper Prompt L-Pop was applied for 15s, and light cured for 10s, the second coat was re-applied and light-cured.(omitted)

• Tribology and Lubricants
• /
• v.36 no.4
• /
• pp.199-206
• /
• 2020

CoCr-based alloys have been developed as wear-resistant materials owing to their excellent mechanical properties and strong wear resistance. The purpose of this study is to experimentally assess the frictional and wear characteristics of CoCr-based alloys slid against two different counter materials subjected to various normal forces to determine the expansion applicability of CoCr-based alloys. CoCrMo and CoCr alloys were selected as the target materials and NiCr and NiCrB alloys as counter materials. Experimental tests were performed using a pin-on-reciprocating plate tribo-tester under dry lubrication. Before performing the tests, the surface of the specimens was observed through confocal microscopy and the hardness was measured using a micro-Vickers hardness tester. The wear volume of the plate was calculated at the end of the tests using confocal microscope data, and the wear rate was quantitatively obtained based on Archard's wear law. From the results, the wear rates of the CoCrMo specimens that slid against NiCr and NiCrB are 7.69 × 10^-6 ㎣/Nm and 5.26 × 10^-6 ㎣/Nm, respectively. The wear rates of the CoCr specimens that slid against NiCr and NiCrB were higher than those of the CoCrMo specimens by factors of approximately 4 and 8, respectively. The CoCrMo specimens further exhibited lower friction characteristics than the CoCr specimens. The findings of this study will be useful for expanded applications of CoCr-based alloys as wear-resistant materials for various mechanical parts.

• Restorative Dentistry and Endodontics
• /
• v.43 no.1
• /
• pp.2.1-2.10
• /
• 2018

Objectives: To determine the effect of size and insertion depth of irrigation needle on the amount of apical extruded debris and the amount of penetration depth of sealer using a confocal laser scanning microscope (CLSM). Materials and Methods: Twenty maxillary premolars were assigned to 2 groups (n = 10), according to the size of needle tip, 28 G or 30 G. Buccal roots of samples were irrigated with respective needle type inserted 1 mm short of the working length (WL), while palatal roots were irrigated with respective needle type inserted 3 mm short of the WL. Prepared teeth were removed from the pre-weighed Eppendorf tubes. Canals were filled with F3 gutta-percha cone and rhodamine B dye-labeled AH 26 sealer. Teeth were transversally sectioned at 1 and 3 mm levels from the apex and observed under a CLSM. Eppendorf tubes were incubated to evaporate the irrigant and were weighed again. The difference between pre- and post-weights was calculated, and statistical evaluation was performed. Results: Inserting needles closer to the apex and using needles with wider diameters were associated with significantly more debris extrusion (p < 0.05). The position of needles and level of sections had statistically significant effects on sealer penetration depth (p < 0.05 for both). Conclusions: Following preparation, inserting narrower needles compatible with the final apical diameter of the prepared root canal at 3 mm short of WL during final irrigation might prevent debris extrusion and improve sealer penetration in the apical third.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.3
• /
• pp.247-257
• /
• 2014

Oil-in-water nanoemulsions of astaxanthin prepared by new vesicle, glyceryl citrate/ lactate/ linoleate/ oleate, were evaluated thoroughly in terms of cosmeceutical properties such as antioxidant effect, cell viability, influence of protein related enzyme, skin penetration, skin hydration and elasticity. Antioxidant effect and cell viability of nanoemulsion of astaxanthin were evaluated by DPPH and MTT assay. Also other properties of nanoemulsions of astaxanthin were measured by proteome analysis using 2D-PAGE, confocal laser scanning microscope and in-vivo test. We were able to find that the nanoemulsion of astaxanthin is good at scavenging of radical and inhibits the degradation of dermal extracellular matrix with the down-regulation of MMPs and other proteins related to MMP expression. CLSM was adopted for observing penetration of nanoemulsion of astaxanthin and showed high effective penetration rate compared to the nanoemulsion of astaxanthin prepared by conventional lecithin. In-vivo measurement of the nanoemulsions in hydration and elasticity were conducted to 11 Korean female adults for 28 days and showed better results.

• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1415-1419
• /
• 2012

Thymosin ${\beta}4$ ($T{\beta}4$) has been reported to be overexpressed in CD133-positive colorectal cancer stem cells. We analyzed the relationship between $T{\beta}4$ and CD133-positive stem cells in normal stomach by examining the expression patterns of $T{\beta}4$ and CD133 in normal stomach tissues by immunohistochemical staining; co-localization of $T{\beta}4$ and CD133 was studied by immunofluorescence and confocal laser-scanning microscopy. Both $T{\beta}4$ and CD133 were expressed in stomach glands and showed similar expression patterns. Immunofluorescence staining of $T{\beta}4$ and CD133 showed that the expression of $T{\beta}4$ and CD133 was co-localized. In summary, both $T{\beta}4$ and CD133 were expressed in glands of normal stomachs and expression patterns were co-localized. These data suggest that $T{\beta}4$ expression is strongly related to CD133 expression.

• Restorative Dentistry and Endodontics
• /
• v.24 no.1
• /
• pp.100-115
• /
• 1999

The purpose of this study was to investigate the distribution of calcitonin gene-related peptide containing nerve fibers in rat pulp after dentinl injury by means of immunohistochemistry and confocal laser scanning microscope. The Spague-Dawley rats weighing about 250-300gm were used. The animals were devided into normal control and experimental groups. Experimental animals were sacrified 1, 2, 4, 7, 10, 21days after dentinal injury (dentin cutting, and then acid etching with 35% phosphoric acid) on the maxillary molar teeth. The maxillary teeth and alveolar bone were removed and immersed in the 4% paraformaldehyde in 0.1M phosphate buffer (pH 7.4), then were decalcified with 15% formic acid for 10 days. Serial frozen $50{\mu}m$ thick sections were cut on a cryostat. The rabbit CGRP antibody was used as a primary antibody with a dilution of 1:2000 in 0.01M PB. The sections were incubated for 48 hours at $4^{\circ}C$, and placed into biotinylated antirabbit Ig G as a secondary anti body with dilution of 1:200 in 0.01M PB and incubated in ABC(avidin-biotin complex). The peroxidase reaction was visualized by incubating the sections in 0.05% 3,3 diaminobenzidine tetrahydrochloride containing 0.02% $H_2O_2$. For the confocal laser scanning microscopic examination, Primary antibody reaction was same as immunoperoxidase stainning, but fluorescein isothiocyanate(FITC)-conjugate antirabbit IgG as a secondary antibody was used. The confocal laser scanning microscope was used for the examination. A series of images of optical sections was collected with a 20x objective at $3{\mu}m$ intervals throughout the depth of specimen. FITC fluerescence was registrated through a 488nm and 568nm excitation filter, and images were saved on optical disk. The stereoscopic images and three dimentionnal images were reconstructed by computer software, and then were analyzed. The results were as follows : 1. In normal control group, CGRP containing nerve fibers were coursed through the root with very little branching, and then formed a dense network of terminals in coronal pulp. 2. A slight increase in CGRP containing nerve fibers at 1 and 2day postinjury was noted subjacent to the injury site. In the 4day group, there were an extensive increase in the number of reactive fibers, followed by a partial return toward normal levels at 7~10 day postinjury, and return by 21days. 3. The sprouting of the CGRP containing nerve fibers was evident within 2day after dentinal injury, and by 4days there was a maximal increased, but was decreased at 7days and returned to normal 10~21 day postinjury. 4. In confocal laser scanning microscopic exammination, the distinct distribution pattern and sprouting reaction of CGRP containing nerve fibers were observed in stereoscopic images and three dimentional images. These results suggest that CGRP containing nerve fiber can be important role in the response to dental injury and pain regulation.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.1
• /
• pp.79-86
• /
• 2004

Hydraulic conductivity along rock fracture is mainly dependent on fracture geometries such as orientation, aperture, roughness and connectivity. Therefore, it needs to consider fracture geometries sufficiently on a fracture model for a numerical analysis to calculate permeability coefficient in a fracture. This study performed new type of numerical analysis using a homogenization analysis method to calculate permeability coefficient accurately along single fractures with several fracture models that were considered fracture geometries as much as possible. First of all, fracture roughness and aperture variation due to normal stress applied on a fracture were directly measured under a confocal laser scaning microscope (CLSM). The acquired geometric data were used as input data to construct fracture models for the homogenization analysis (HA). Using the constructed fracture models, the homogenization analysis method can compute permeability coefficient with consideration of material properties both in microscale and in macroscale. The HA is a new type of perturbation theory developed to characterize the behavior of a micro inhomogeneous material with a periodic microstructure. It calculates micro scale permeability coefficient at homogeneous microscale, and then, computes a homogenized permeability coefficient (C-permeability coefficient) at macro scale. Therefore, it is possible to analyze accurate characteristics of permeability reflected with local effect of facture geometry. Several computations of the HA were conducted to prove validity of the HA results compared with the empirical equations of permeability in the previous studies using the constructed 2-D fracture models. The model can be classified into a parallel plate model that has fracture roughness and identical aperture along a fracture. According to the computation results, the conventional C-permeability coefficients have values in the range of the same order or difference of one order from the permeability coefficients calculated by an empirical equation. It means that the HA result is valid to calculate permeability coefficient along a fracture. However, it should be noted that C-permeability coefficient is more accurate result than the preexisting equations of permeability calculation, because the HA considers permeability characteristics of locally inhomogeneous fracture geometries and material properties both in microscale and macroscale.

• Clinical and Experimental Pediatrics
• /
• v.51 no.1
• /
• pp.54-61
• /
• 2008

Purpose : This study was designed to clarify the mechanism of proteinuria in nephrotic syndrome patients by using puromycin aminonucleoside (PAN) nephrosis model. Methods : Following administration of various concentrations of PAN and antioxidants we observed the changes of podocyte cytoskeletons in cultured rat glomerular epithelial cells (GEpC) by method of scanning electron microscope, reactive oxyten species (ROS) analysis, permeability assay, confocal microscope, and Western blot assay. Results : PAN not only induced the ultrastructural changes of GEpC, such as shortening and fusion of microvilli, but also separated the intercellular gaps and linear ZO-1. PAN induced oxidative stresses in time and dose dependent manners and increases of intercellular permeability in anti-oxidants inhibitable manners. High concentration of PAN induced not only actin polymerization and disorganization, but also the conglomerulation and internal dislocation of ${\alpha}-actinin$ protein. The intensities of fluorescences of ZO-1 protein were diminished and internalized by PAN in a dose-dependent manner, which were inhibited by anti anti-oxidants. Conclusion : PAN induced the changes of podocytes cytoskeleton and junctional barriers by way of increasing ROS in GEpC that resulted in increasing their permeability in a antioxidatn-inhibitable manner. Glomerular hyperpermeability induced by PAN mediateing through oxidative stresses is thought to take part in the mechanism of proteinuria in nephrotic syndrome.

• Applied Microscopy
• /
• v.39 no.4
• /
• pp.291-299
• /
• 2009

We report on a quantitative analysis of cone and rod photoreceptors in hamster retina. Cone and rod photoreceptors were counted in retinal whole mounts using differential interference contrast (DIC) optics microscopy after staining of cone photoreceptors were stained with peroxidase-labeled peanut lectin. Middle-to-long-wave-sensitive-(M/L-), and shortwave-sensitive-(S-) cone opsins were visualized by observed using confocal microscope after immunocytochemical procedure. The average cone density was 9,307 $cells/mm^2$, giving a total of cones of 293,060 cone cells per retina. The peak density of cone cells (12,857 $cells/mm^2$) was found 0.3 mm from the optic disk (OD) of the nasal retina. The average rod density was 300,082 $cells/mm^2$, giving a total number of rods of 9,448,150 cells. The peak density of rod cells was found 0.3 mm from the OD of the dorsal retina. Of all photoreceptors studied, the total percentage of rods and cones were 96.99% and cones 3.01%, respectively. The mean ratio of rod and cone was 32.24 : 1. The cone photoreceptors of hamster contained both M/L- and S-cone opsins. The present results suggest that the hamster retina is strongly rod-dominated with some photopic property of vision.

• Economic and Environmental Geology
• /
• v.52 no.6
• /
• pp.587-593
• /
• 2019

This study were subjected to accelerated weathering test under freeze-thaw and pressure conditions to observe initiation and propagation of cracks using CLSM. Applied stress was set at 50 MPa, 55 MPa, 70 MPa for 3 samples each by using compressor and freeze-thaw experiment was conducted while samples maintained that condition. In freeze-thaw experiments, a temperature range was set to -20~40℃ which was 1 cycle for 6 hours. The freeze-thaw cycle was composed of time which reached to set temperature for 1 hour and holding time for 2 hours. On the basis of this cycle, surface of samples was observed by CLSM after each 20 freeze-thaw cycle. From this research, according to increase freeze-thaw cycle, there were 7, 10, 19 each cracks and High pressured sample's accumulate length was longer than low pressured sample's. High pressured sample's crack velocities were also faster than low pressured sample's which were calculated by accumulate length and freeze-thaw cycle.