• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.10a
• /
• pp.44-47
• /
• 2005

The purpose of this study is to identify the characteristics of the Dressing-Room lay-out in brand-apartments as the strategy for the differentiation. The 441 floor-plans are collected by searching web-sites of the 5 main construction companies. The major findings are summarized as follows: (1) The Dressing-Rooms are designed in the 331 cases among 441 the floor-plans including the Dressing-Room are generally over 30 Pyeong(about 99 square meters). In addition, the entire cases above 60 Pyeong(about 198 square meters) include the Dressing-Room. (2) The size of the Dressing-Room is increased in proportion to the square meter. However, the ratio is the small range of fluctuation. (3) The types of Dressing-Room units are classified 4 categories : a dressing-room joined powder room, a dressing-room separated from bathroom, a dressing room without powder room, a powder room centering with dressing room and bathroom.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.613-618
• /
• 2006

The 1st International Conference on Magnetic Refrigeration at Room Temperature was held at Montreux, Switzerland during September 27-30, 2005. The conference was the first of its kind to bring together about 140 scientists and engineers interested in magnetic refrigeration in one place. The magnetocaloric effect was discovered in 1881, however, magnetic refrigeration at room temperature was demonstrated to be viable in 1997 Since then, R&D efforts toward magnetic refrigeration have been on the rise around the world, in both areas of systems and materials. The conference reflected the recent R&D trend in magnetic refrigeration at room temperature, which includes the use of permanent magnet instead of superconductor magnet, switch from reciprocating to rotary magnetic refrigeration system, development of magnetic materials based on transition metal elements besides rare earth materials such as gadolinium(Gd).

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.589-594
• /
• 1998

Heat and fluid flow in the motor block room of a motorized car is numerically simulated. The motorized car, composed of a motor block room and a passenger room, supplies additional Power to achieve the design speed. A motor block, a transformer, and a fan are equipped in the motor block room. Flow phenomena in the ducts on the motor block and power transformer are investigated. Also, the three dimensional heat and fluid flow in the motor block room is simulated to give a qualitative information of the flow characteristics.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.10a
• /
• pp.235-236
• /
• 2005

A medical college is faculty which performs frequent experiments and holds lots of seminars for these reasons, this place was designed to exchange its concentration, taking its spatial psychology convenience and its functions into consideration. This space has been built up as the technological and multi-functional space to encourage it to accomplish special functions required by each of facilities, such as the president room, a main center of administration in the medical college, an audience chamber, an attached room, the room for alumni, preventive medicine and Micro biological diseases, a legal medicine lecture room, the room for basic medical science and a conference room.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2004.11a
• /
• pp.361-366
• /
• 2004

This study has carried out in order to furnish the fundamental material to systemize the lecture room into multimedia in the future, by locating college lecture room as the subject of study, by compare and analyze on acoustic character in both before and after of each improvement. Thereby, now we are about to compare and analyze on physical character of room acoustics in both common lecture room before improvement and the modified multimedia-lecture room after its improvement. Observing the conclusion obtained through experiment, reverberation time in the modified 'lecture room after improvement' became shorter compare with the 'lecture room before improvement', definition and RASTI also improved to be suitable to lecture, and considered that it is able to elevate the intimacy with studying and teaching efficiency, as well.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1317-1320
• /
• 2006

This study compared the floor impact sound level of rectangular receiving room type to differed receiving room types to analyze effect of room mode. The floor impact sound level of master room were higher than the level of living room which resulted from room mode. The result showed that the level of low frequency bandwidth in the location varied with receiving room types were lower than general measuring point of rectangular receiving room.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.2
• /
• pp.73-82
• /
• 2000

This paper presents a significant improvement achieved in the acoustic characteristics of a conference room of I-company originally designed and built without consideration for room acoustic characteristics. The reverberation time of the room was excessive, which resulted in poor 'Definition' for speech. Thus the improvement of room acoustic characteristics was required. In this study, experiments and simulations using the principles of geometrical acoustics were executed to improve the acoustic characteristics in the room. By performing a series of simulation, it has become possible to predict acoustic parameters for an improvement plan. And the improvement plan of room acoustic characteristics was established. And for the verification of the simulation results, the experimental data were compared and evaluated against those from the simulation. Additionally, the proposed method in this paper demonstrated its effectiveness by successfully improving the room acoustic characteristics resulted from repair construction.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.520-525
• /
• 2003

우리나라는 IT 강국으로 관련 부품 등을 생산하기 위한 Clean Room 시설이 기하급수적으로 증가하고 있으나, 열·연기 확산에 대한 과학적인 분석이 멀티플렉스, 할인점, 고층 빌딩 등에만 국한되고 있어 생산시설에 대찬 적극적인 검증이 이루어지지 않고 있다. 또한 Clean Room 시설이 가장 많은 국가로 우리나라와 더불어 미국, 일본, 대만 정도에 지나지 않아 국제적으로 Clean Room에 대한 많은 방재기준 제정 및 연구가 미흡하다.(중략)

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.333-334
• /
• 2006

Extinguishing a fire at an early stage is most important to prevent spreading of a fire in Unmanned Engine Room. The most proper fire extinguish system was analyzed after examining the Automatic spread Extinguish System, which is mostly installed in Unmanned Engine Room, reproduced in the condition of real Unmanned Engine Room.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.23-27
• /
• 2007

Many trials have been used to model room impulse responses, all attempting to provide efficient representations of room acoustics. The traditional model designs for room impulse response seem to fail in accuracy, controllability, or computational efficiency. In time domain, a room impulse response is generally considered as the combination of three parts having different acoustic characteristics, initial time delay, early reflection, and late reverberation. This paper introduces new learning hybrid model for the room impulse response. In this proposed model, those three parts are modeled using different models with learning algorithms that determine the length or boundary of each model in the hybrid model. By the simulation with measured room impulse responses, it was examined that the performance of proposed model shows the best efficiency in views of both the parameter numbers and modeling error.