• 한국지반환경공학회 논문집
• /
• 제4권2호
• /
• pp.47-56
• /
• 2003

인구증가와 산업발달로 인해 산업폐기물의 발생량은 매년 증가하고 있으며, 이들 폐기물 중 제지회의 발생량도 증가하고 있다. 산업폐기물을 재활용할 수 있다면 경제적 환경적으로 유익할 것이다. 따라서, 본 연구에서는 일련의 실내실험을 통하여 기본특성, 다짐, 압밀, 투수 및 압축강도 특성을 분석하여 제지회를 건설재료로서 활용하기 위한 방안을 연구하였다. 본 실험에서 콘크리트 벽돌과 점토 벽돌의 품질을 평가하기 위하여 제지회의 치환률을 2, 4, 6, 8, 10, 12, 14, 16, 18, 20%로 하여 제작한 콘크리트 벽돌과 제지회의 치환률을 5, 10, 15, 20, 25, 30%로 변화시키면서 제작한 점토 벽돌을 사용하였다. 시험결과, 콘크리트 벽돌과 점토 벽돌의 품질기준을 만족하는 제지회의 최대 치환률은 각각 11.5%와 12%로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권4호
• /
• pp.87-98
• /
• 2011

최근 생태 친환경 건축이 화두로 등장하면서 친환경 건축재료인 점토벽돌과 공기의 흐름과 수분의 이동이 가능한 석회모르타르의 사용이 증가하고 있다. 하지만 국내 연구는 콘크리트벽돌과 시멘트모르타르에 집중되고 있어 점토벽돌 및 석회모르타르에 대한 연구가 거의 없는 실정이며, 조적조의 국내 기준 또한 국내에서 사용되는 재료와 다른 물리적 값을 사용하고 있는 국외기준을 바탕으로 제정되어 국내 실정을 적절히 반영하지 못하고 있다. 따라서 본 연구는 프리즘압축강도, 부착강도, 전단 및 사인 장강도 실험을 통해 점토벽돌과 석회모르타르를 사용한 조적구조의 물리적 특성을 파악하고자 한다. 또한, 콘크리트벽돌과 시멘트모르타르를 사용한 조적구조와의 물리적 특성을 비교분석하여 국내 조적기준을 개정하기 위한 근거를 제시하고자 한다. 점토 벽돌과 석회모르타르를 적용한 조적구조는 콘크리트벽돌과 시멘트모르타르를 사용한 조적구조와는 다른 양상을 보이므로 점토벽돌과 석회모르타르를 적용한 조적구조의 프리즘압축강도와 탄성계수에 대한 추정식을 제안한다.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.674-680
• /
• 2022

In the present study, radiation shielding and protection ability of prepared Flyash-lime-Gypsum (FaLG) bricks has been studied in terms of energy exposure build up factors and dose parameters. The energy exposure build up factors of Flyash-lime-Gypsum (FaLG) bricks have been calculated for the energy range of 0.015 MeV-15 MeV and for penetration depth upto 40 mfp directly using a new and simplified Piecewise Linear Spline Interpolation Method (PLSIM). In this new method, the calculations of G.P fitting parameters are not required. The verification and accuracy of this new method has been checked by comparing the results of exposure build up factor for NBS concrete calculated using present method with the results obtained by using G.P fitting method. Further, the relative dose distribution and reduced exposure dose rate for various radioactive isotopes without any shielding material and with Flyash-lime-Gypsum (FaLG) bricks have been calculated in the energy range of 59.59-1332 keV. On the basis of the obtained results, it has been reported that the prepared Flyash-lime-Gypsum (FaLG) bricks possess satisfactory radiation shielding properties and can be used as environmentally safe storage facilities for low level nuclear waste.

• 한국건축시공학회지
• /
• 제13권5호
• /
• pp.506-512
• /
• 2013

Since the amendment of the law on the private sector investment in social infrastructure in January of 2005, the government has been actively promoting Build-Transfer-Lease (BTL) projects. Notably, most new educational facilities have been built as BTL projects. For these facilities, the unit cost per unit area has been applied to predict construction costs. However, since construction costs are mostly managed after the detailed design phase, the costs can be estimated incorrectly. For this reason, cost management is needed in the planning phase, with a sound approximate estimate to prevent the wasteful use of funds. To address this shortcoming, this study aims to develop a quantity prediction model for education facilities using regression analysis in the planning phase. The developed model is focused on the required quantities of reinforced concrete and bricks. In order to achieve the objective, the data of 44 educational facility projects collected from Gyeonggi-do was used in the regression model. This study can be utilized by major stakeholders to accurately predict construction costs by estimating the appropriate quantities of reinforced concrete and bricks in the planning design phase.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.47-51
• /
• 2006

Modern residing equipment developed much quantitatively along with economic growth but improvement for agreeable residing space of indoor environment is insufficient situation yet. Also, the latest sick-building syndrome discharging room contaminant such as Formaldehyde, toluene, radon etc. built house or buildings newly human body threaten. Radon of them is real condition that raise origination of lung cancer next to smoke. So, wish to in this research by one of solution way of these problems adsorption performance and specie performance excellent activated carbon to concrete bricks for deconstipating suppository that is room finish fare mix and examine closely after grasp physical, mechanical special quality, hazardous substance and specie performance effect. According to result that estimate environment efficiency evaluation, the $CO_2$ absorption amount displayed decrease effect more than about 90% in activated carbon metathesis rate 40% and radon release amount displayed tendency that decrease about $76{\sim}96%$ in activated carbon metathesis rate 40%.

• 보존과학회지
• /
• 제30권3호
• /
• pp.287-298
• /
• 2014

이 연구에서는 무령왕릉에 사용된 전돌의 재료 특성에 관하여 고찰하였다. 압축 강도, 열전도도, 흡수율 등의 재료 특성은 비파괴 실험으로 측정하였다. 그 중에서 무령왕릉 전돌의 압축강도는 초음파 측정법과 흡수율을 이용하여 추정하였다. 실험 결과, 초음파 속도를 이용한 압축강도는 표면이 고르지 못하고 두께 편차가 큰 문화재 시편 특성상 표준편차가 크게 나타났다. 그러나 흡수율을 적용한 압축강도 값 (28.69 MPa ~ 33.19 MPa)은 일반 콘크리트의 압축강도 수준으로 편차가 낮게 나타났다. 따라서 초음파 속도를 이용하는 방법보다 흡수율을 이용하는 방법이 무령왕릉 전돌의 압축강도 예측법으로 보다 적합한 것으로 판단된다. 무령왕릉 전돌의 열전도도는 시료의 표면상태와 두께에 영향을 받지 않는 Mathis TCi를 이용하여 측정하였으며, 평균 1.58 W/mK로 흙에 근접한 값을 지닌다. 무령왕릉 전돌의 흡수율과 수분 잔류율은 각각 1.6 % ~ 15 %, 0 % ~ 0.7 %의 범위를 나타냈다.

• Computers and Concrete
• /
• 제5권5호
• /
• pp.449-459
• /
• 2008

This paper focuses on the application of two dimensional orthogonal polynomials in the regression analysis for the relationship of product parameters viz. compressive strength, bulk density and water absorption of fly ash cement bricks with other process parameters such as percentages of fly ash, sand and cement. The method has been validated by linear and non-linear two parameter regression models. The use of two dimensional orthogonal system makes the analysis computationally efficient, simple and straight forward. Corresponding co-efficient of determination and F-test are also reported to show the efficacy and reliability of the relationships. By applying the evolved relationships, the product parameters of fly ash cement bricks may be approximated for the use in construction sectors.

• Advances in concrete construction
• /
• 제4권4호
• /
• pp.231-242
• /
• 2016

The major problem of a coal combustion-based power plant is that it creates large quantity of solid wastes. So, to achieve the gainful use of waste materials and to avoid other environmental problems, this study was undertaken. The quantity of coal ash by-products, particularly coal fly ash and coal bottom ash has been increasing from the coal power plants around the world. The other objective of this study was to explore the possibility of utilization of coal ash in the production of ash bricks. In 15 different mixes, Mix Designation M-1 to M-15, the varying percentages of lime and gypsum were used and sand was replaced with coal bottom ash. Further, it has been noticed that the water absorption and compressive strength of mix M-15 is 13.36% and 7.85 MPa which is better than the conventional bricks. The test results of this investigation show that the prism strength of coal ash masonry prisms was more than that of the conventional bricks.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.417-420
• /
• 2005

Construction industry is one of the fastest growing sectors in the world. Rapid construction activity and growing demand of houses have lead to the short fall of traditional building materials, such as burnt bricks. It is better to replace the traditional materials by the good quality of building materials with the low cost and durable environment friendly building materials. In order to satisfy that purpose, the researchers need to vary of new and innovative building materials. This paper shows the properties of compressive strength of ocher for unburnt bricks.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.573-580
• /
• 2003

In Taiwan there are 21 Municipal Solid Waste Incinerators (MSWI) built to treat 80% of the MSW nationwide. Approximately 2,000 tons of incineration ashes of municipal waste contain reaction ash and fly ash (3:1 by weight)will be produced daily, and this may cause a serious waste problem. According to EPA regulations, reaction ash and fly ash produced after incineration should be properly treated. Landfill capacity barely meets the general demands. More efficient actions should be planned and taken. The study found 'reclamation' should be the optimal solution to this problem. Only limited research and previous successful experiences are available among other countries. An incinerator in Northern Taiwan is chosen for this study to make environmental bricks from the reaction ash and fly ash. From the previous tests, the results of strength test were measured. From the previous test results, the fly ash products have not reached the desired strength; hence, reaction ash is chosen for further pilot study. In the experiment, incineration ashes, cement and gravel are mixed in the ratio of 1:1:1(by weight), to ground concretization aggregate and pelletization aggregate, the concrete products made from the aggregates were of the strength of 108 $kgf/cm^2$ and 142 $kgf/cm^2$ individually. For the purpose of making nonstructural walls which met the State Building Standards. In the study, 50 tons of concrete products was yielded from aggregate and environmental bricks. Further observation and supervision are recommended to ascertain the resource recycling and reclamation. EPA has planned to build three 'Recycling Plants' in northern, middle and southern Taiwan to develop efficient techniques to produce concrete products, sub-base course, soundproofing wall, gravel, artificial fishing reefs, tiles, drainage, bricks and etc. This experiment of the demonstrative plant solves the problem of the incineration ashes and opens another opportunity to reclaim them.