KIPS Transactions on Computer and Communication Systems
/
v.12
no.8
/
pp.253-262
/
2023
E-voting is a concept that includes actions such as kiosk voting at a designated place and internet voting at an unspecified place, and has emerged to alleviate the problem of consuming a lot of resources and costs when conducting offline voting. Using E-voting has many advantages over existing voting systems, such as increased efficiency in voting and ballot counting, reduced costs, increased voting rate, and reduced errors. However, centralized E-voting has not received attention in public elections and voting on corporate agendas because the results of voting cannot be trusted due to concerns about data forgery and modulation and hacking by others. In order to solve this problem, recently, by designing an E-voting system using blockchain, research has been actively conducted to supplement concepts lacking in existing E-voting, such as increasing the reliability of voting information and securing transparency. In this paper, we proposed an electronic voting system that introduced hybrid blockchain that uses public and private blockchains in convergence. A hybrid blockchain can solve the problem of slow transaction processing speed, expensive fee by using a private blockchain, and can supplement for the lack of transparency and data integrity of transactions through a public blockchain. In addition, the proposed system is implemented as BaaS to ensure the ease of type conversion and scalability of blockchain and to provide powerful computing power. BaaS is an abbreviation of Blockchain as a Service, which is one of the cloud computing technologies and means a service that provides a blockchain platform ans software through the internet. In this paper, in order to evaluate the feasibility, the proposed system and domestic and foreign electronic voting-related studies are compared and analyzed in terms of blockchain type, anonymity, verification process, smart contract, performance, and scalability.
The Journal of the Institute of Internet, Broadcasting and Communication
/
v.23
no.4
/
pp.189-196
/
2023
As the manufacturing paradigm shifts, various collaborative robots are creating new markets. Demand for collaborative robots is increasing in all industries for the purpose of easy operation, productivity improvement, and replacement of manpower who do simple tasks compared to existing industrial robots. However, accidents frequently occur during work caused by collaborative robots in industrial sites, threatening the safety of workers. In order to construct an industrial site through robots in a human-centered environment, the safety of workers must be guaranteed, and there is a need to develop a collaborative robot guard system that provides reliable communication without the possibility of dispatch. It is necessary to double prevent accidents that occur within the working radius of cobots and reduce the risk of safety accidents through sensors and computer vision. We build a system based on OPC UA, an international protocol for communication with various industrial equipment, and propose a collaborative robot guard system through image analysis using ultrasonic sensors and CNN (Convolution Neural Network). The proposed system evaluates the possibility of robot control in an unsafe situation for a worker.
Park, Ji Hyeun;Lee, Gyeong A;Lee, Jiyeon;Park, Young Uk;Park, Ji-Hyuk
Therapeutic Science for Rehabilitation
/
v.12
no.2
/
pp.85-98
/
2023
Objective : We investigated the efficacy of an artificial intelligence computerized cognitive training program using motion capture to identify changes in cognition, depression, and quality of life in older adults with mild cognitive impairment. Methods : A total of seven older adults (experimental group = 4, control group = 3) participated in this study. During the COVID-19 period from October to December 2021, we used a program, "MOOVE Brain", that we had developed. The experimental group performed the program 30 minutes 3×/week for 1 month. We analyzed patients scores from the Korean version of the Mini-Mental State Examination-2, the Consortium to Establish a Registry for Alzheimer's Disease Assessment Packet for Daily Life Evaluation, the short form Geriatric Depression Scale, and Geriatric Quality of Life Scale. Results : We observed positive changes in the mean scores of the Stroop Color Test (attention), Stroop Color/Word Test (executive function), SGDS-K (depression), and GQOL (QoL). However, these changes did not reach statistical significance for each variable. Conclusion : The study results from "MOOVE Brain" can help address cognitive and psychosocial issues in isolated patients with MCI during the COVID-19 pandemic or those unable to access in-person medical services.
This study aims to identify which factors affect successful big data system construction, identify the relationship between the factors, and identify the success model and success factors necessary for public institutions to build big data systems. Therefore, the preceding and related studies related to this study were reviewed, and success factors for the establishment of a big data system were derived based on this. As a research method, a survey was conducted on users of institutions that have established or planned to build a big data system, and a structural equation (AMOS) was conducted to verify the impact relationship between success factors. As a result of the analysis, organizational support factors, development support factors, user support factors, information quality, service quality, system quality, use, and net benefit were derived as success factors for building big data systems, and a success model was presented. This can be seen as significant and academic contributions in that it is the first study of the success model for building an information system reflecting big data characteristics, and it is expected that this study will be used as basic data for building a big data system in public institutions in the future.
As times develop, information becomes more diverse and methods of obtaining it become more diverse. About 80% of the amount of information gained in life is acquired through the visual sense. However, visually impaired people have limited ability to interpret visual materials. That's why Braille, a text for the blind, appeared. However, the Braille decoding rate of the blind is only 5%, and as the demand of the blind who want various forms of platforms or materials increases over time, development and product production for the blind are taking place. An example of product production is braille books, which seem to have more disadvantages than advantages, and unlike non-disabled people, it is true that access to information is still very difficult. In this paper, we designed a CNN-based Braille conversion and voice output device to make it easier for visually impaired people to obtain information than conventional methods. The device aims to improve the quality of life by allowing books, text images, or handwritten images that are not made in Braille to be converted into Braille through camera recognition, and designing a function that can be converted into voice according to the needs of the blind.
In this study, it was analyzed with the dyeing pattern of Diospyros kaki Thunb (persimmon) and was tried to numerically evaluate how the dyeing pattern in silk fabrics and cells was changed by different mordants. When the dyed silk fabrics were sufficiently dried, the silk fabrics were found to have a pale yellow color. Interestingly, iron II sulfate mordant changed the color change the most, silk fabrics were dyed with a color close to brown or dark purple. For numerical analysis, 19% and 62.5% color changes could be induced by sodium tartrate plus citric acid and copper acetate, respectively. Iron II sulfate induced the greatest difference than that of untreated mordants at 88%. About 5% and 10% of Chinese hamster ovary (CHO) cells were stained by sodium tartrate plus citric acid and copper acetate, respectively. The staining effect induced by iron II sulfate was about 2.4 times higher than the staining effect by sodium tartrate plus citric acid. In previous studies, staining results have been visually confirmed. However, this results not only visually confirmed the dyeing, but also quantified the color change. In particular, if numerical results are continuously integrated into big data, any researcher will be able to easily obtain similar results even if the method, time, volume, etc. are changed. In addition, the numerical data of this study is considered to be an important basis for building a database for IoT construction and computer analysis.
Recently, With the recent rapid development of technology, the amount of data generated by various systems is increasing, and enterprise servers and data centers that have to handle large amounts of big data need to apply high-stability and high-performance storage devices even if costs increase. In such systems, SSD(solid state disk) that provide high performance of read/write are often used as storage devices. However, due to the characteristics of reading and writing on a page-by-page basis, erasing operations on a block basis, and erassing-before-writing, there is a problem that performance is degraded when duplicate writes occur. Therefore, in order to delay this performance degradation problem, over-provision technology of SSD has been applied internally. However, since over-provided technologies have the disadvantage of consuming a lot of storage space instead of performance, the application of inefficient technologies above the right performance has a problem of over-costing. In this paper, we proposed a method of measuring the performance and cost incurred when various over-provisions are applied in an SSD and predicting the system-optimized over-provided ratio based on this. Through this research, we expect to find a trade-off with costs to meet the performance requirements in systems that process big data.
Although domestic public libraries achieved quantitative growth based on the 1st and 2nd comprehensive library development plans, there were some qualitative shortcomings, and various studies have been conducted to improve them. Most of the preceding studies have limitations in that they are limited to social and economic factors and statistical analysis. Therefore, in this study, by applying the spatiotemporal concept to quantitatively calculate the decrease in public library loan demand due to rainfall and heatwave, by clustering areas with high demand for book loan due to weather changes and areas where it is not, factors inside and outside public libraries and After the combination, changes in public library loan demand according to weather changes were analyzed. As a result of the analysis, there was a difference in the decrease due to the weather for each public library, and it was found that there were some differences depending on the characteristics and spatial location of the public library. Also, when the temperature was over 35℃, the decrease in book loan demand increased significantly. As internal factors, the number of seats, the number of books, and area were derived. As external factors, the public library access ramp, cafe, reading room, floating population in their teens, and floating population of women in their 30s/40s were analyzed as important variables. The results of this analysis are judged to contribute to the establishment of policies to promote the use of public libraries in consideration of the weather in a specific season, and also suggested limitations of the study.
Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
/
v.7
no.6
/
pp.709-718
/
2017
The installation of the elevator ARD(Automatic Rescue Device) system has been forced into law in these days in order to safely rescue passengers during power failure. The configuration of the ARD system consists of energy storage device, power converter and control systems. The EDLC(Electric Double Layer Capacitor) are used as energy storage device for rapid charge/discharge purposes. The power conditioning system (PCS) consists of bi-directional converter, 3-phase converter and control system. The dead-beat control system is adopted for most systems however it requires complex mathematical calculations, the high performance microprocessors are mandatory and thus it can be a cause of high manufacturing cost. In this paper the new control method for average current mode control is presented for simple structure. The control algorithm is applied to the single phase system and then expands to three phase system to meet the sysem requirements. The mathematical modeling using average modeling method is presented and analysed by PSIM computer simulation to verifie the validity of the proposed control methods.
The Journal of the Convergence on Culture Technology
/
v.9
no.3
/
pp.407-413
/
2023
The purpose of this study is to provide basic information about various methods to easily affix unique embroidery effects to clothes due to the current expansion of digital fashion technology. A comparison of design techniques using virtual and real clothing was used to show the visual expression of embroidery designs. Actual embroidery motifs were created using a computer embroidery machine, DTP embroidery motifs were made by utilizing digitalization techniques, and digital motifs were produced. Then patch pocket type T-shirts were produced using each embroidery technique to compare the visual expression effects on clothing. The results of this comparison are as follows: for real clothing color (3.5), texture (4.0), gloss (3.8), and thickness (3.5). It was found that the color and thickness of the embroidery floss was visually sufficiently show the design texture and gloss. In terms of the embroidery design on virtual garments, the resutls of color (3.8), texture (4.3), gloss (3.9), and thickness (3.6) showed a high degree of similarity to the non-virtual results, confirming that digitized embroidery motifs are also a tool that can fully realize unique embroidery effect.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.