• 품질경영학회지
• /
• 제30권2호
• /
• pp.86-98
• /
• 2002

Defining the relationship between the quality of injection molded parts and the process condition is very complicate because of lots of factor are involved and each factor has a non-linearity. With the development of CAE(Computer Aided Engineering) technology, the estimation of volumetric shrinkage of injection mold parts is possible by computer simulation even though restricted application. In this research, Neural Network applied for finding optimal processing condition. The percent of volumetric shrinkage compared on each case and show neural network can be successfully applied selecting optimum condition not only within factor level but also between factor level.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.95-102
• /
• 2002

With recent trends leaning towards product miniaturization, the advent of new material and speedy delivery times, old style conventional trial-and-error methods have been only serving to weaken corporate competitiveness. Reliant on tiny increments of time-consuming experience, this antiquated approach begets a delayed delivery of product development, cost loss and quality depreciation. To solve such problems, the Dedicated Injection Molding CAPA (Computer Aided Plastics Application) performs a preliminary examination on problems rising from every stage of creation - from appropriate material selection and mold design to mass production - through a computer system. Thus, it determines the optimum design variables and process conditions while diagnosing and solving defective molds.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.27-29
• /
• 1994

The application of Computer is utilized as instruction tool. In order to improve the educational qualitative effect of the moter in the electrical engineering part, this paper has described the development of teaching tool for the structure, principle, characteristics and control method of the induction motor by applying the demonstration and simulation type among various computer aided instructions (CAI). The educational technology is applied to the demonstration type using 3 dimensional model in consideration of a visual effect about the structure and principle of the induction motor. Teaching tool is applied to simulation type which presents onrush various results to understand the characteristic and the control method of the induction motor.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.237-243
• /
• 2002

Recently, in computer-aided geometric modeling(CAGD), subdivision surfaces are frequently employed to construct free-form surface. Subdivision schemes have been very popular in computer graphics and animation community, but the community of CAGD adopts this tool only recently to handle surface geometry. In the present study, Loop scheme and Catmull-Clark scheme are applied to generate smooth surfaces. To be consistent with the limit points of target surface, the initial sampling points are properly rearranged. The pointwise curvature errors and coordinate value errors between the points in the sequence of subdivision process and the points on the target surface are evaluated In the numerical examples in both Loop scheme ＆ Catmull-Clark subdivision scheme.

• 산업경영시스템학회지
• /
• 제25권2호
• /
• pp.71-76
• /
• 2002

Defining the relationship between the quality of Injection molded parts and the process condition is very complicate because of lots of factors are involved and each factor has a non-linearity. With the development of CAE(Computer Aided Engineering) technology, the estimation of volumetric shrinkage of injection mold parts is possible by computer simulation in spite of restricted application. In this research, the Taguchi method md Neural Network are applied for finding optimal processing condition. The percent of volumetric shrinkage is compared on each case and shows neural network can be successfully applied.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.425-428
• /
• 2002

The technology of Computer Graphics (CG) has been in great progress for almost 20 years and has proven to be a valuable tool for a broad variety of fields, including nuclear engineering. To work in any hazardous environment for example radiation field is particularly challenging because the danger is not always visually apparent. In this study as the application of CG to nuclear engineering field, we proposed to develop a radiation risk recognition aided system in which various radiation information; radiation risks, radiation distribution, hazard information and so on, were visualized by CG. The system used the server and client system. In the server there were two parts; one (main-server) was the database part having various data and the other (sub-server) was the visualization part visualizing the human phantom by POV-Ray. In the client there was the input and output part. The outputs from the system were various radiation information represented by coloring, circle graph and line graph intuitionally. The system is useful for a broad range of activities including radiation protection, radiation management, dose minimization, and demonstration to the public.

• Journal of Astronomy and Space Sciences
• /
• 제31권3호
• /
• pp.241-246
• /
• 2014

The Amon-Ra instrument is the main optical payload of the proposed EARTHSHINE satellite. It consists of a visible wavelength instrument and an IR energy channel instrument to measure a global Earth albedo. We report a new sensitivity technique for efficient alignment of the visible channel instrument. Whilst the sensitivity table method has been widely used in the alignment process, the straightforward application of the method tends to produce slow process convergence because of shop floor alignment practice uncertainties. We investigated the error sources commonly associated with alignment practices and used them when estimating the Zernike polynomial coefficients. Aided with single center field wavefront error (WFE) measurements and their corresponding Zernike polynomial coefficients, the method involves the construction and use of an experimental, instead of simulated, sensitivity table to be used for alignment state estimations. A trial alignment experiment for the Amon Ra optical system was performed and the results show that 71.28 nm in rms WFE was achieved only after two alignment iterations. This tends to demonstrate its superior performance to the conventional method.

• 인터넷정보학회논문지
• /
• 제19권5호
• /
• pp.107-113
• /
• 2018

Object-oriented databases (OODBs) canbe used for many non-traditional database application areas such as computer-aided design, etc. Usually those application areas require advanced modeling power for expressing complicated relationships among data sets. OODBs have more distinguished features than the traditional relational database systems. One of the distinguished characteristics of OODBs is class hierarchy (also called inheritance hierarchy). A class hierarchy in an OODB means that a class can hand down the definitions of the class to the subclass of the class. In other words, a class is allowed to inherit the definitions of the class from the superclass. In this paper, we present performance evaluation metrics for class hierarchy in OODBs from a concurrency control perspective. The proposed performance metrics are developed to determine which concurrency control scheme in OODBs can be used for a given class hierarchy. In this study, in order to develop performance metrics, we use class hierarchy structure (both of single inheritance and multiple inheritance), and data access frequency for each class. The proposed performance metrics will be also used to compare performance evaluation for various concurrency control techniques.

• Journal of Forest and Environmental Science
• /
• 제29권4호
• /
• pp.307-313
• /
• 2013

Forest Survey consists of road survey, topographic survey, tree mapping survey, stream survey and also ridge survey. Information from forest survey is important and become essential in preparing base map to be used for forest harvesting planning and control. With the current technologies technique of data processing and mapping from traditionally hand drawn method had shifted to a computer system particularly the use of Computer Aided Design (CAD). This gives great advantages to the forest managers and logging operators. However data processing and mapping duration could be further reduced by integrating CAD with other established software such as Microsoft Excel. This time study to show that there is significance difference in term of duration for data processing and efficiency using AutoCAD in combination with Microsoft Excel program as compare to the use of AutoCAD program alone. From the study, it shows that the integration of AutoCAD and Microsoft Excel is able to reduce 70% of duration for data processing and mapping as compared to the use of AutoCAD program alone.

• Computers and Concrete
• /
• 제16권2호
• /
• pp.287-309
• /
• 2015

FormWorks-Plus is a generalized public domain user-friendly preprocessor developed to facilitate the process of creating finite element models for structural analysis programs. The lack of a graphical user interface in most academic analysis programs forces users to input the structural model information into the standard text files, which is a time-consuming and error-prone process. FormWorks-Plus enables engineers to conveniently set up the finite element model in a graphical environment, eliminating the problems associated with conventional input text files and improving the user's perception of the application. In this paper, a brief overview of the FormWorks-Plus structure is presented, followed by a detailed explanation of the main features of the program. In addition, demonstration is made of the application of FormWorks-Plus in combination with VecTor programs, advanced nonlinear analysis tools for reinforced concrete structures. Finally, aspects relating to the modelling and analysis of three case studies are discussed: a reinforced concrete beam-column joint, a steel-concrete composite shear wall, and a SFRC shear panel. The unique mixed-type frame-membrane modelling procedure implemented in FormWorks-Plus can address the limitations associated with most frame type analyses.