• 한국건설순환자원학회논문집
• /
• 제9권3호
• /
• pp.253-259
• /
• 2021

플라스틱은 소비량 증가에 따라 생활계폐기물 중 폐플라스틱의 발생량도 급격히 증가하고 있으나, 분리, 선별 공정 비용 증가 등으로 재활용은 저조한 실정이다. 이에 본 연구는 생활계폐기물 발생 복합재질 폐플라스틱을 콘크리트용 골재로 재활용하기 위한 기초 연구로 고로슬래그 미분말을 충진한 복합재질 폐플라스틱 잔골재 및 굵은골재의 투입 비율 및 투입량이 콘크리트의 슬럼프 및 압축강도에 미치는 영향을 실험적으로 평가하였다. 복합재질 폐플라스틱 굵은골재는 부순 굵은골재 대비 조립률은 유사하나, 입자 크기가 작은 단입도 분포인 반면에, 복합재질 폐플라스틱 잔골재는 부순 잔골재 대비 조립률 및 입자 크기가 큰 단입도 분포인 것으로 나타났으며, 고로슬래그 미분말에 의한 밀도 및 공극 충진에 의한 흡수율 향상 효과는 복합재질 굵은골재 대비 복합재질 잔골재가 큰 것으로 나타났다. 복합재질 폐플라스틱 골재의 투입량이 증가할수록 콘크리트의 슬럼프와 압축강도는 감소하였다. 특히, 동일한 양의 복합재질 폐플라스틱 골재 투입 수준에서 복합재질 폐플라스틱 잔골재의 투입량이 많을수록 슬럼프와 압축강도는 작아지는 것으로 나타났으며, 이는 복합재질 폐플라스틱 잔골재 중 ROD 형상의 골재 하부에 공기가 갇히면서 형성된 공극에 의한 것으로 판단된다. 한편, 혼화제 투입 및 단위 시멘트량 증대는 복합재질 폐플라스틱 골재 투입 콘크리트의 압축강도 향상에는 효과가 있는 것으로 나타났다.

• 한국철도학회논문집
• /
• 제17권4호
• /
• pp.223-227
• /
• 2014

제동 패드는 철도차량의 기초제동요소 중 하나이다. 제동 패드는 제동 캘리퍼로부터 압부력을 전달받아 제동디스크와의 마찰력으로 철도차량에 제동작용을 한다. 따라서 제동 패드는 주어진 고압의 압부력을 견뎌야 하므로 제동 패드의 주요 성능평가항목으로 압축강도를 관리한다. 압축강도를 측정하는 규격은 KRS, KRCS, KRT 등이 있다. 이들 규격은 압축강도를 측정하기 위한 시험편의 크기를 $20mm{\times}10mm{\times}15mm$ (가로${\times}$세로${\times}$높이)로 규정하고 있다. 압축강도에 대한 불확도를 줄이기 위하여 불확도 요인을 분석한 결과, 단면의 치수를 변경함으로써 불확도를 줄일 수 있음을 알았다. 새로운 단면치수에 의한 불확도를 평가하여 불확도 감소에 대한 유효성을 입증하였다.

• 한국터널지하공간학회 논문집
• /
• 제10권1호
• /
• pp.59-68
• /
• 2008

골재 특성, 혼화재, 그리고 급결제 등이 콘크리트에 미치는 역학적 영향성을 평가하였다. 굵은골재 치수가 13 mm에서 8 mm로 작아질수록 유동 특성은 감소되었으나, 경화 콘크리트의 강도 및 동탄성계수는 크게 증가했다. 실리카흄 치환 적용 시 plain과 비교해 압축 강도 및 동탄성계수가 개선되었고, 고로슬래그 미분말을 적용한 경우 28일 재령에서 압축강도는 다소 증진되었다. 초기 수화 반응 및 압축 강도는 알루미네이트계 급결제를 적용한 시편이 다소 우수했고, 28일 강도 특성은 알칼리프리계 급결제 적용 시 크게 개선되었다.

• Computers and Concrete
• /
• 제21권5호
• /
• pp.485-493
• /
• 2018

Statistical analysis has found useful application in the design of experiments (DOE) especially optimization of concrete ingredients however, to be able to apply the concept properly using computer aided applications there has to be an upper and lower limits of responses fed to the system. In this study, the production of high-performance steel fiber concrete (HPSFC) at five different fiber addition levels by volume with two aspect ratios of 60 and 83 were studied under two curing methods completely dry cured (DC) and moist cured (MC) conditions. In other words, this study was carried out for those limits based on material properties available in North Cyprus. Specimens utilized were cubes 100 mm size casted and cured for 28 days and tested for compressive strength. Minitab 18 statistical software was utilized for the analysis of results at a 5 per cent level of significance. Experimentally, it was observed that, there was fluctuation in compressive strength results for the two aspect ratios and curing regimes. On the other hand P-value hypothesis evaluation of the response showed that at the stated level of significance, there was a statistically significant difference between dry and moist curing conditions. Upper and lower limit values were proposed for the response to be utilized in DOE for future studies based on these material properties. It was also suggested that for a narrow confidence interval and accuracy of the system, future study should increase the sample size.

• Structural Engineering and Mechanics
• /
• 제67권5호
• /
• pp.505-516
• /
• 2018

In this paper, the effects of particle size and model scale of concrete has been investigated on the failure mechanism of PFC2D numerical models under uniaxial compressive test. For this purpose, rectangular models with same particle sizes and different model dimensions, i.e., $3mm{\times}6mm$, $6mm{\times}12mm$, $12mm{\times}24mm$, $25mm{\times}50mm$ and $54mm{\times}108mm$, were prepared. Also rectangular models with dimension of $54mm{\times}108mm$ and different particle sizes, i.e., 0.27 mm, 0.47 mm, 0.67 mm, 0.87 mm, 1.07 mm, 1.87 mm and 2.27 mm were simulated using PFC2D and tested under uniaxial compressive test. Concurrent with uniaxial test, direct shear test was performed on the numerical models. Dimension of the models were $75{\times}100mm$. Two narrow bands of particles with dimension of $37.5mm{\times}20mm$ were removed from upper and lower of the model to supply the shear test condition. The particle sizes in the models were 0.47 mm, 0.57 mm, 0.67 mm and 0.77 mm. The result shows that failure pattern was affected by model scale and particle size. The uniaxial compressive strength and shear strength were increased by increasing the model scale and particle size.

• 한국주조공학회지
• /
• 제5권2호
• /
• pp.85-96
• /
• 1985

In order to investigate the effect of particle size and distribution of silica sand on the characteristics of investment, W/P ratio, setting time, temperature change during setting, setting expansion, thermal expansion and compressive strength of the investments were measured. In this experiment, magnesia clinker and mono ammonium phosphate were used as binder, and particle size and distribution of silica sand were classified for convinence into 10 categories. The main results obtained from this investigation were summerized as follows. 1. W/P ratio decreased with increase of particle size and evenness in distribution of sand grain. 2. Setting time decreased with increase of evenness in distribution of sand grain, and temperature during setting increased with evenness in distribution of sand grain. 3. Setting expansion decreased with increase of particle size, while it increased with evenness in distribution of sand grain. 4. Thermal expansion decreased with increase of particle size. 5. Compressive strength increased with increase of particle size and evenness in distribution of sand grain. From above results, G.F.N. 250 sand which contains 30% of 50-100 mesh could be recommended for investment casting.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.941-946
• /
• 2001

In this study, three kinds of fine aggregate (river sand, sea sand, crushed sand) were used and four different s/a (38%, 40%, 42%, 45%) were applied separately to this experimental for get the conclusion written below. Regardless of kinds of fine aggregate and casting-curing condition, maximum unit weight is seen at 40% of s/a and also to be seen in case of crushed sand. It's for that specific gravity of crushed sand is bigger comparatively than river sand and sea snad's one. Compressive strength is measured river sand, crushed sand, sea sand by order of size ; Regardless of variation of s/3, casting-curing condition and age. Compressive strength recorded maximum when s/a is 42% whatever sort of fine aggregate are. As the result, according to references, the optimum s/a of underwater antiwashout concrete is 40% but in this study, from compressive strength of view, the optimum s/a of underwater antiwashout concrete is 42%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.259-260
• /
• 2018

This study evaluated the compressive strength, freeze-thaw and sulfate resistance characteristics of concrete using CFBC-Ash. The CFBC-Ash was adjusted to a particle size of 75 ㎛ or less and using by increasing the fineness of powder through milling. As a result, it was confirmed that the concrete using CFBC-Ash shows a high compressive strength, durability. Also, it is confirmed that CFBC-ash can be used as a concrete binder.

• 한국세라믹학회지
• /
• 제45권3호
• /
• pp.185-189
• /
• 2008

In order to fabricate porous ceramics, hydrated sodium silicate was synthesized by hydrothermal reaction using anhydrous sodium silicate. The microstructural and the structural characteristics of the expanded ceramics were observed depending on heat treatment temperature (550, 600, 650, $700^{\circ}C$) and then the effect of these characteristics on the compressive strength and the temperature gradient was investigated. As the heat treatment temperature was increased, the compressive strength was decreased from $0.717KN/cm^2\;(550^{\circ}C)\;to\;0.166KN/cm^2\;(700^{\circ}C)$. The temperature gradient was increased with increasing the experimental temperature regardless of the heat treatment temperature. The temperature gradient of the expanded ceramics which was heat treated at $650^{\circ}C\;was\;300^{\circ}C$. The bulk specific gravity, porosity, pore size, pore characteristics and wall thickness were varied depending on heat treatment temperature, and the compressive strength and the temperature gradient were governed by the complex effects of these factors.

• 한국도로학회논문집
• /
• 제13권1호
• /
• pp.169-175
• /
• 2011

콘크리트에서 강도는 콘크리트의 물리적 특성을 평가할 수 있는 중요한 인자 중 하나이며 콘크리트에 가장 많은 부피를 차지하는 것이 골재이다. 또한 시멘트는 콘크리트 만드는 결합재로서 이 역시 강도와 매우 밀접한 관계가 있다. 이러한 골재와 시멘트의 특성이 콘크리트 압축강도와 전단파 속도의 상관관계에 미치는 영향을 파악하고자 굵은 골재 최대치수와 시멘트 종류별로 실험을 실시하였다. 시멘트는 1종 시멘트와 초속경 시멘트를 사용했고, 골재는 서로 다른 지역의 3가지 골재를 사용하였다. 골재의 입도는 굵은 골재 최대치수 19mm와 13mm의 단입도 골재를 사용하여 동일 배합시 압축강도와 전단파 속도의 상관관계를 살펴보았다. 또한 골재의 특성을 정량화 하고자 LA마모시험을 실시하였다. 그 결과 압축강도와 전단파 속도의 상관관계는 시멘트 종류에 따라 달랐으나, 골재의 종류, 입도 및 마모감량에 관계없이 일정한 상관성을 보이는 것으로 나타났다.