• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.256-263
• /
• 2018

The binder polymers for digital textile printing(DTP) pigment inks were prepared using miniemulsion polymerization with various monomer compositions to study effects of monomer compositions on particle size distribution, average molecular weight, Tg, and color strength and rubbing fastness of the dyed fabrics with the prepared binder based pigment ink. The monomers used were MMA(Methyl methacrylate), BA(Butyl acrylate), MAA(Methacrylic acid), NMA(N-methylol acrylamide), NEA(N-ethylol acrylamide) and the ratios of the monomers were changed. The particle size was the smallest with 136nm when the MMA to BA weight ratio was 4:16 and the largest with 290nm when the MMA, BA, MAA, NEA ratio was 2.5:17:0.25:0.25. However, the glass transition temperature was lowest with $-41.90^{\circ}C$ and the color strength and rubbing fastness of the resulting sample were the best when the MMA, BA, MAA, NEA ratio was used. This suggested that the introduction of the NEA monomer to the binder polymer for the pigment ink could be an efficient way to enhance the rubbing fastness of the DTP pigment inks present.

• Textile Coloration and Finishing
• /
• v.31 no.2
• /
• pp.77-87
• /
• 2019

To improve rubbing fastness of the printed fabrics, the binder polymers for Digital Textile Printing(DTP) pigment inks were synthesized with miniemulsion polymerization using various acrylic monomers, which are MMA(Methyl methacrylate), BA(Butyl acrylate), and Self-crosslinking monomers, such as NEA(N-Ethylol acrylamide) and MAA (Methacrylic acid). The acrylic monomer compositions were varied when synthesizing the binder polymers and their particle size distributions, average molecular weights, and Tgs were investigated. The prepared binder polymers were applied to prepare Cyan, Black, Yellow and Magenta pigment ink for DTP and the prepared inks were used to dye cotton fabrics. Then, color strength, and rubbing fastness were also investigated to study the effect of the comonomer compositions of the binder polymer on the color strength and rubbing fastness of the resulting pigment inks.

• Journal of the Korean Institute of Rural Architecture
• /
• v.22 no.4
• /
• pp.71-78
• /
• 2020

Today, the whole world is going through a big chaos due to the COVID-19, but paradoxically, the emergence of COVID-19 has been leading to the need for sustainable development, such as Green New Deal that can improve global warming and carbon emissions, and the need for sustainable architecture is growing bigger and bigger in the architectural field as well. The level of CLT buildings in Korea is at a very rudimentary stage, while CLT buildings remedying existing wooden buildings are getting the spotlight among European countries for sustainable architecture. This study was conducted to categorize structure layer compositions of overseas CLT buildings and analyze architectural techniques and materials applied by collecting and analyzing information about CLT structure layer compositions of overseas CLT building-related institutions, companies and cases. When classifying structure layer compositions of foreign CLT buildings depending on the roles of layers. it was revealed that exterior wall structure layers were combined and organized within a sequence of external finishing, ventilation, waterproof, board, external insulation, airtightness, structure, airtightness, interior insulation, interior finishing, sloped roof structure layers were external finishing, ventilation, waterproof, board, external insulation, airtightness, structure, airtightness, interior insulation, interior finishing, flat roof structure layers were external finishing, ventilation, waterproof, planking wood, external insulation, waterproof, external insulation, airtightness, structure, airtightness, interior insulation, interior finishing.

• PNF and Movement
• /
• v.9 no.4
• /
• pp.23-31
• /
• 2011

Purpose : The aim of this study was to investigate the correlations between body compositions and bone mineral density in young women and postmenopausal women with low bone mineral density. Methods : Eleven young women (age, $25.85{\pm}1.96yrs$; height, $160.28{\pm}2.16cm$; weight, $56.89{\pm}9.66kg$) and ten postmenopausal women (age, $25.85{\pm}1.96yrs$; height, $160.28{\pm}2.16cm$; weight, $56.89{\pm}9.66kg$) with low bone density on femur neck were participated in this study. All subjects performed the measure of body composition and BMD on lumbar body and femur neck. Results : The results were as follows. Percent body fat, waist-hip ratio and body mass index(BMI) were significantly increased in postmenopausal women. BMD in lumbar body and femur neck were significantly decreased in postmenopausal women. There were negative strong correlation between BMD of the femur and age in young women. There were negative strong correlation between BMD of the femur and age or the years of menopause in postmenopausal women. There were positive strong correlation between BMD of the femur and BMD of lumbar body. Conclusion : Percent body fat and BMI were more increased in young women than in postmenopausal women. And there were negative strong correlation between BMD and age or the years of menopause in postmenopausal women.

• Computers and Concrete
• /
• v.29 no.5
• /
• pp.347-360
• /
• 2022

Fiber-reinforced cementitious composites (FRCC) have emerged as a response to the calls for strong, ductile and sustainable concrete mixes. FRCC has shown outstanding mechanical properties and ductility where special fibres are used in the mixes to give it the strength and the ability to exhibit strain hardening. With the possibility of designing the FRCC mixes to include sustainable constituents and by-products materials such as fly ash, FRCC started to emerge as a green alternative as well. To be able to design mixes that achieve these conflicting properties in concrete, there is a need to understand the composition effect on FRCC and optimize these compositions. Therefore, this paper aims to investigate the influence of FRCC compositions on the properties of fresh and hardened of FRCC and then to optimize these mix compositions using factorial design approach. Three factors, water-to-binder ratio (w/b), mineral admixtures (total of fly ash and metakaolin by cement content (MAR)), and metakaolin content (MK), were investigated to determine their effects on the properties of fresh and hardened FRCC. The results show the importance of combining both FA and MK in obtaining a satisfactory fresh and mechanical properties of FRCC. Models were suggested to elucidate the role of the studied factors and a method for optimization was proposed.

• Journal of Embryo Transfer
• /
• v.31 no.3
• /
• pp.235-242
• /
• 2016

This study tested the association between genotypes of the single nucleotide polymorphism (SNP) marker, rs81437607 and capric acid (FA_C10_0) compositions in longissimus dorsi muscle in pigs. Eighteen fatty acid (FA) compositions were measured in a total of 974 $F_2$ animals among 1,106 $F_2$ progeny produced between Landrace and Jeju Black Pig (JBP). Among FA compositions tested, we identified a cluster of highly significant SNPs for capric acid compositions on 58 Mb position of Sus scrofa chromosome 12 (SSC12) using genome-wide association study (GWAS) with $F_2$ genotypes from SNP panel analysis. GWAS results showed that the rs81437607 was the highest trait-related SNP marker with capric acid levels. Three genotypes (C/C, C/T and T/T) of rs81437607 marker were found in $F_2$ population by further pyrosequencing. Association analysis results showed the significant differences between rs81437607 genotypes and capric acid compositions (P<0.05). The $F_2$ pigs harboring rs81437607 C/C ($0.119{\pm}0.002%$) and C/T ($0.116{\pm}0.002%$) genotypes showed additively higher levels of capric acid content than those of T/T homozygotes ($0.109{\pm}0.002%$) ($P=1.30{\times}10^{-12}$). These results suggested that the genetic variations of rs81437607 may be helpful to find causative variants and assist as molecular genetic markers for improving the capric acid contents in longissimus dorsi muscle in pigs.

• Journal of Life Science
• /
• v.10 no.3
• /
• pp.273-278
• /
• 2000

The chemical compositions as amino acids, minerals, fatty acids, and total polyphenolic compounds of the seeds of leek (Allium tuberusum) were analyzed. The antioxidative activity of water soluble extract from leek seeds was also tested in DPPH ($\alpha$, $\alpha$ - diphenyl-$\beta$ -picrylhydrazyl) method. The chemical compositions of leek seeds were moisture 4.4%, curde protein 25.7%, crude fat 16.6%, and crude ash 2.9%. Major amino acid compositions were proline 11 g, glutamic acid 4.9 g, arginine 2.1g, aspartic acid 1.6g, leucine 1.3g, valine 1.2 g, and methionine 1.1 g as per 100g. Mineral contents were K 215 ppm, Ca 142 ppm, Fe 124 ppm, and Mg 100 ppm. Major fatty acid compositions were linoleic acid 71.9%, oleic acid 12.7%, palmitic acid 8.6%, and stearic acid 1.4%. The changes of contents in polyphenolic compound from leek seeds caused by heat treatment were also listed in the following order; $20^{\circ}C$(364mg/100g), $40^{\circ}C$(462 mg/100g), and $60^{\circ}C$(551 mg/100g). Antioxidative activity as electron donating ability showed in the following order; 0.05% BHT(butylated hydroxytoluene)(45.6%)>0.05% water-extract(31.3%)>0.1% water extract(30.3%). On the basis of chemical analysis, the leek seedsshowed to have relatively high contents of nutrients as amino acids, minerals, fatty acids.

• Journal of Nutrition and Health
• /
• v.33 no.1
• /
• pp.13-22
• /
• 2000

Effects of high fat diet and/or endurance exercise training on hepatic total and phospholipid(PL) fatty acid compositions were evaluated in rats fed one of the following diets for 31 days. control diet(CD, 5 wt% corn oil) or high fat diet(HFD, 35 wt% corn oil). Half of the rats in each group were exercise-trained regularly on a treadmill for 90 minutes/day during the entire feeding period. Total and PL fatty acid compositions of hepatic lipid extracts were determined by a gas-liquid chromatograph),. Endurance exercise training did not change the daily food intake, but significantly reduced body weight gain and feed efficiency ratio of rats, which were most prominent in animals fed HFD. Exercise training did not significantly change the percentages of ∑saturated fatty acids (SFA) and ∑polyunsaturated fatty acids(PUEA), but decreased the percentage of ∑monounsaturated fatty acids(MUFA) in hepatic total fatty acids, which might be associated with the decrease in (equation omitted) 9-desaturation index of hepatic total fatty acid metabolism. Exercise training significantly lowered the percentages of 16 : 0 and 22 : 5$\omega$3, and increased the percentages of 20 : 1 and 20 : 3$\omega$3 in both total and PL fatty acid compositions in rat liver. Both total fatty acid and PL fatty acid compositions of rat liver responded more sensitively to changes in dietary fat content than to endurance exercise training in this study. Feeding HFD, whoch contains high level of linoleic acid(LA, 18 : 2$\omega$6), significantly decreased the percentages of ∑SFA and $\Sigma$MUFA, and increased the percentages of ∑PUFA and ∑$\omega$6 fatty acids of hepatic total fatty acids. Hepatic total fatty acid composition was affected by dietary fat content and dietary fatty acid composition more sensitively than those found in hepatic PL fatty acid composition. HFD significantly decreased most of desaturation indices, while exercise training significantly decreased elongation index(20 : 5$\omega$3⇒22 : 5$\omega$3) of hepatic total and PL fatty acid metabolism in rats. (Korean J Nutrition 33(1) : 13-22, 2000)

• Journal of Embryo Transfer
• /
• v.15 no.2
• /
• pp.137-145
• /
• 2000

To investigate fatty acid constituents and relative compositions in the fluid of the follicles, oviducts, uterine ho군 and uterine body in sows, the fluids of the reproductive tract were analyzed using Gas chromatography. The samples were taken from various reproductive tract of 21 sows slaughtered. 1. Caprylic acid(C8: 0), capric acid(C10:0), lauric acid(C12:0), myristic acid(C14:0), palmitic acid(C16:0), plamitolele acid(C16:1), stearic acid(C18:0), oleic acid(C18:1), linoleic acid(C18:2) and arachidonic acid(C20:4) were found in the reproductive tracts of the sows, which made 10 kinds of fatty acid intotal. 2. Two kinds of polyunsaturated fatty acids, linoleic acid and archidonic acid were found inthe reproductive tracts. 3. Palmitic acid among saturated fatty acids and oleic acid among unsaturated fatty acids were the hihgest level in all of the reproductive tracts. 4. Palmitic acid, oleic acid and stearic acid showed higher rate with 44.89%, 23.69% and 14.36%, respectively, and lauric acid, capric acid, palmitoleic acid, arachidonic acid ad myristic acid showed lower rate with 0.62%, 1.13%, 1.65%, 1.97% and 2.24%, respectively in the reproductive fluid. 5. The highest level of arachidonic acid was found in the uterine horn. 6. The sum of the palmitic acid and oleic acid were 66.91%, 70.41%, 66.14% and 73.36% in the fluid of follicle, oviduct, uterine horn and uterine body, respectively. 7. The relative composition of arachidonic acid was higher during the follicular stage than during the luteal phase in the fluid of oviduct and uterine. 8. The long chain fatty acids such as the palmitic acid, stearic acid, oleic acid and linoleic acid showed higher relative compositions during the follicular phase(93.18%∼96.83%) than during the luteal phase(82.56%∼88.37%). 9. Caprylic acid, luric acid and palmitoleic acid were undetected in the fluid of all of the reproductive tracts during the follicular phase. Low relative compositions of capric acid, myristic acid andarachidonic acid were found during the follicular phase, while the low relative compositions (<5%)of capric acid, lauric acid, myristic acid, plamitoleic acid and arachidonic acid were found during the luteal phase.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.1013-1019
• /
• 1995

The thin plate of Co-Ni-P was deposited on the polyester film by the electroless plating method. Through present experiments, deposition rates and metal compositions of the plates were determined according to compositions of solution, pH and temperature. Also, magnetic properties of plates were examined according to metal compositions. Considering magnetic properties and deposition rates of electroless plating, the best condition was obtained as pH of 8.5 and 90℃. It was observed that metal compositions were evidently varied by the pH of solutions and the concentration of complex agents. However. they were not affected by other factors. At the optimum condition, the composition of the plate was Co(78%), Ni(16%), and P(6%). Also, it was found that the coercive force was 370 Oe, and squareness was 0.65 at this condition. Magnetic properties (hard or soft) of thin plates were determined by metal compositions. Therefore. the plate became soft magnetic plate as the composition of nickel increased over 30 per cents. The crystal structure of the soft magnetic plate was found to be amorphous in which it was strongly oriented to the (111)phahe of nickel. On the ohter hand, the hard magnetic place was found to be hcp crystalline of α-cobalt which was oriented to the (101)phase of cobalt and the (100)phase of cobalt.