• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.3-5
• /
• 1994

It is shown that the power flow considering the voltage characteristic of the composite load has some difference comparing with conventional load flow in this paper. When the load flow is used in a study of the static voltage stability, it is necessary to consider the voltage characteristic of load, since the composite load of a typical power system bas constant power, constant current, and constant impedance characteristic. The load is modeled to a polynomial form in here, and used in solving the load flow problem. In this way, the effect which the voltage characteristic of the load has on several voltage collapse proximity indicator based on sensitivities is compared with the conventional load flow, or with another load model having a different voltage characteristic. In this paper, the voltage collapse proximity indicator using the sensitivity of real power for transmission loss is also proposed, and compared with other indicators.

• Journal of Korea Water Resources Association
• /
• v.39 no.4 s.165
• /
• pp.321-334
• /
• 2006

The need for economical and accurate presentations of equivalent radar reflectivity( $Z_e$) data in an orthogonal coordinate system has existed for some time. So, in this study, a fast and efficient procedure has been developed which allows the systematic interpolation of digital reflectivity data from radar space into Cartesian space. At first, QC(Quality Control) of radar data has been executed for extracting uncontaminated Constant Altitude Plan Position Indicator(CAPPI) data. The algorithm is designed so that only one ordered pass through the original Plan Position Indicator(PPI) scan data is necessary to complete the interpolation process. The model can calculate various resolution and altitude reflectivity data for many kinds of hydrological usage.

• Composites Research
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2004

A new non-destructive evaluation method using tapping sound is proposed. This method, named Tapping Sound Analysis, is using the difference between tapping sound data of healthy structure and defective structure as the criteria of determination of internal defect of composite structure. For the characterization of tapping sound, a feature extraction method based on wavelet packet transform is proposed. And a feature index is defined for the decision of existence of internal defects. To prove the possibility of proposed method as a non-destructive evaluation method, experimental study is performed. The tapping sound data of healthy structure and defective structure are measured and compared based on the proposed decision method. The experimental results showed that the feature index is a good indicator for the determination of internal defects.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.3
• /
• pp.279-285
• /
• 2007

Toxicity evaluations using oxygen uptake rate (OUR) on activated sludge process were investigated. On toxicity evaluations of heavy metals, all toxicants in experiments decreased OUR with respect to the concentrations of the toxicants, while high toxicities with cyanide and mercury were observed respectively. On toxicity evaluations of composite heavy metals, composite toxicities had similar results as to the total sum of each toxicants that presents accurate toxicity evaluation using OUR. From these results, it is concluded that activated sludge is effective indicator for toxicity evaluation on wastewater of biological treatment plants.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.269-272
• /
• 2005

Nondestructive damage sensing and load transferring mechanism of Ni nanowire strands and multi-wall carbon nanotube (MWCNT)/epoxy composites were investigated using electro-micromechanical techniques. MWCNT composite was especially prepared for high volume contents, 50 vol % of reinforcement. Electro-micromechanical techniques were applied to measure apparent modulus and contact resistance of Ni nanocomposites with their alignment and different diameters, and adding contents. Applied cyclic load affected on apparent modulus and electrical properties on nanocomposites due to various inherent properties of each CNMs. Contact resistivity on humidity sensing was a good indicator for monitoring as for multifunctional applications. Further study on actuation as well as sensing will be investigated for the following work continuously.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.153-156
• /
• 2005

Nondestructive sensing of electrospun PYDF web and multi-wall carbon nanotube (MWCNT)/epoxy composites were investigated using electro-micromechanical technique. Electrospinning is a technique used to produce micron to submicron diameter polymeric fibers. Electrospun PVDF web was also evaluated for the sensing properties by micromechanical test and by measurement electrical resistance. CNT composite was especially prepared for high volume contents, 50 vol% of reinforcement. Electrical contact resistivity on humidity sensing was a good indicator for monitoring as for multifunctional applications. Work of adhesion using contact angle measurement was studied to correlate acid-base surface energy between carbon fiber and CNF composites, and will study furher for interfacial adhesion force by micromechanical test.

• Structural Engineering and Mechanics
• /
• v.57 no.2
• /
• pp.295-313
• /
• 2016

In this study, the three-dimensional finite element method is used to determine the stress intensity factor in Mode I and Mixed mode of a centered crack in an aluminum specimen repaired by a composite patch using contour integral. Various mesh densities were used to achieve convergence of the results. The effect of adhesive joint thickness, patch thickness, patch-specimen interface and layer sequence on the SIF was highlighted. The results obtained show that the patch-specimen contact surface is the best indicator of the deceleration of crack propagation, and hence of SIF reduction. Thus, the reduction in rigidity of the patch especially at adhesive layer-patch interface, allows the lowering of shear and normal stresses in the adhesive joint. The choice of the orientation of the adhesive layer-patch contact is important in the evolution of the shear and peel stresses. The patch will be more beneficial and effective while using the cross-layer on the contact surface.

• Korean Journal of Remote Sensing
• /
• v.20 no.1
• /
• pp.1-11
• /
• 2004

Based on surface energy balance climatology, surface temperatures should respond to drying conditions well before plant response. To test this hypothesis, land surface temperatures (LST) derived from MODIS data were analyzed to determine how the data were correlated with climatic water balance variables and NDVI anomalies during a growing season in Western and Central Kansas. Daily MODIS data were integrated into weekly composites so that each composite data set included the maximum temperature recorded at each pixel during each composite period. Time-integrated, or cumulative values of the LST deviation standardized with mean air temperatures had significantly high correlation coefficients with SM, AE/PE, and MD/PE, ranging from 0.65 to 0.89. The Standardized Thermal Index (STI) is proposed in this study to accomplish the objective. The STI, based on surface temperatures standardized with observed mean air temperatures, had significant temporal relationships with the hydroclimatological factors. STI classes in all the composite periods also had a strong correlation with NDVI declines during a drought episode. Results showed that, based on LST, air temperature observations, and water budget analysis, NDVI declines below normal could be predicted as early as 8 weeks in advance in this study area.

• Health Policy and Management
• /
• v.23 no.2
• /
• pp.176-187
• /
• 2013

Background: In 2006 Emergency Medical Services Index (EMSI), which summarizes the performance of regional emergency medical services system, was developed. This study assesses the performance of the EMSI to help determine whether EMSI can be used as evaluation tool. Methods: To build a composite score of the EMSI from predefined 24 indicators, 3 normalized values were calculated for each indicator, the normalized values of each indicator were weighted using 4 weighting methods, and the weighted values were aggregated into the final composite score using 2 aggregation schemes. The performance of EMSI was evaluated using 3 criteria: discrimination, construct validity, and sensitivity. Discrimination was the proportion of regions that did not include the overall median rank in the 5th to 95th percentiles rank interval, which was calculated from Monte Carlo simulation. Construct validity was a correlation among the alternative EMSIs. Sensitivity of EMSIs was evaluated by total shift of quartile membership and changes of 5th to 95th percentile intervals. Results: The total discrimination performance of the EMSI was 50.0%. Correlation coefficients between EMSIs using standardized values and those using rescaled values ranged from 0.621 to 0.997. Variation of the quartile membership of regions ranged from 0.0% to 75.0%. The total change in the 5th to 95th percentile intervals ranged from -19 to +17 places. Conclusion: The results suggested that the EMSI could be used as a tool for evaluating quality of regional EMS system and for identifying the areas for quality improvement.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.301-306
• /
• 2014

We proposed a new PCB-type 'common-mode current($I_c$) and differential-mode current($I_d$) detector' working for fast detection of $I_c$ and $I_d$ from the differential-mode signaling, with miniaturization effect and possibility of cheaper fabrication. In order to realize this device, we suggest a branch-line-coupler balun having a composite right- and left-handed(CRLH) one-layer microstrip phase-shifting line as compact as roughly ${\lambda}_g/14$. The presented balun obviously is different from the conventional bent-&-folded delay lines or slits on the ground for coupling the lines on the top and bottom dielectrics. As we connect the suggested balun output ports of the differential-mode signal lines via the through-port named U and coupled-port named L, $I_c$ and $I_d$ will appear at port ${\Delta}$ and port ${\Sigma}$ of the present device, in order. The validity of the design scheme is verified by the circuit-and numerical electromagnetic analyses, and the dispersion curve proving the metamaterial characteristics of the geometry. Besides, the examples of the $I_c$ and $I_d$ indicator are observed as the even and odd modes in differential-mode signal feeding. Also, the proposed device is shown to be very compact, compared with the conventional structure.