• Structural Engineering and Mechanics
• /
• 제20권2호
• /
• pp.143-160
• /
• 2005

Modal analysis of cracked cantilever composite beams, made of graphite-fibre reinforced polyamide, is studied. By using the finite element and component mode synthesis methods, a numeric model applicable to investigate the vibration of cracked composite beams is developed. In this new approach, from the crack section, the composite beam separated into two parts coupled by a flexibility matrix taking into account the interaction forces. These forces are derived from the fracture mechanics theory as the inverse of the compliance matrix calculated with the proper stress intensity factors and strain energy release rate expressions. Numerical results are obtained for modal analysis of composite beams with a transverse non-propagating open crack, addressing the effects of the location and depth of the crack, and the volume fraction and orientation of the fibre on the natural frequencies and mode shapes. By means of modal data, the position and dimension of the defect can be found. The results of the study confirmed that presented method is suitable for the vibration analysis of cracked cantilever composite beams. Present technique can be easily extended to composite plates and shells.

• 대한기계학회논문집
• /
• 제18권8호
• /
• pp.2123-2138
• /
• 1994

A study on the dynamic mechanical properties of the high strength carbon fiber epoxy composite beam was carried out. The macromechanical model was used for the theoretical analysis of the symmetric laminated composite beam. The anisotropic plate theory and Bernoulli-Euler beam theory were used to predict the effective flexural elastic modulus and the specific damping capacity of laminated composite beam. The free flexural vibration and torsional vibration tests were carried out to determine the specific damping capacities of the unidirectional laminated composite beam. The vibration tests were performed in a vacuum chamber with laser vibrometer system and electromagnetic hammer to obtain accurate experimental data. From the computational and experimental results, it was found that the theoretical values with the macromechanical analysis and the experimental data of symmetric laminated composite beam were in good agreement.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.548-548
• /
• 2012

Thermomechanical and surface chemical properties of composite films of poly(D, L-lactic-co-glycolic acid) (PLGA) were significantly improved by the addition of graphene oxide (GO) nanosheets as nanoscale fillers to the PLGA polymer matrix. Enhanced thermomechanical properties of the PLGA/GO (2 wt.%) composite film, including an increase in the crystallization temperature and reduction in the weight loss, were observed. The tensile modulus of a composite film with increased GO fraction was presumably enhanced due to strong chemical bonding between the GO nanosheets and PLGA matrix. Enhanced hydrophilicity of the composite film due to embedded GO nanosheets also improved the biocompatibility of the composite film. Improved thermomechanical properties and biocompatibility of the PLGA composite films embedded with GO nanosheets may be applicable to biomedical applications such as scaffolds.

• Composites Research
• /
• 제28권6호
• /
• pp.340-347
• /
• 2015

VARTM 공정에서 고분자 수지가 함침 될 때 시간에 따라 섬유보강재가 팽창하여 섬유체적율이 감소하는 현상이 발생한다. 풍력 블레이드와 같은 대형 복합재료 구조물의 경우 섬유체적율의 변동 폭이 커져 제품의 치수가 변하고 기계적 물성이 저하될 뿐 아니라 예측하지 못한 고분자 수지의 사용량이 증가하는 등의 문제점과 경제적인 손실이 발생할 여지가 증가할 수 있다. 본 연구에서는 VARTM 공정에서 수지 함침에 따른 섬유 보강재의 팽창 현상에 관한 분석을 통하여 복합재료 액상 성형 공정에서의 섬유 체적율을 조절하는 방안을 모색하였다. 그 결과 유동 선단의 진행에 따라 섬유의 팽창 현상이 크게 두 단계로 구분되어 나타나는 것을 확인하였고 각각의 단계에서 작용하는 힘을 분석함으로써 섬유의 체적율 변화에 관한 현상학적 모델을 제시하였고 1차원 편미분 수치 해석과 연계하여 VARTM공정에서 수지 함침에 따른 섬유 체적율의 변화를 예측하였다.

• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.784-790
• /
• 2003

본 논문은 세라믹재료가 강화재로써 보강된 복합재료가 횡방향의 단축인장하중을 받는 경우, 복합재료의 변형, 재료내 발생되는 손상의 특징, 및 응력-변형률 특성에 관한 컴퓨터 해석결과이다. 해석은 SiC/Ti 시스템을 대상으로 하였으며, 특성은 강화재의 배열형태, 강화재/기지 계면에서의 결합유무, 강화재의 부피분율변화에 대하여 각기 해석되었다. 계면에서 강한 결합이 있는 복합재와는 달리, 약한 결합의 복합재는 인장하중에 의하여 세라믹/기지 계면에서 분리가 발생되었다. 이 분리는 전체 복합재의 강성을 감소시키며, 세라믹 강화재의 부피분율이 증가할수록 탄성계수 및 횡방향 평균응력의 최종크기를 나타내는 한계응력의 크기감소로 나타났다. 계면결합이 강한 경우는 세라믹 부피분율이 증가할수록 사각형 배열보다는 육각형배열의 복합재에서 다소 큰 증가율로 나타났다. 그러나, 계면결합이 약한 경우는 세라믹 부피분율이 증가할수록 사각형 배열보다는 육각형배열의 복합재에서 상대적으로 큰 감소율로 해석되었다. 본 연구의 해석결과는 알려진 문헌의 결과와 잘 일치하였다.

• Steel and Composite Structures
• /
• 제19권6호
• /
• pp.1531-1548
• /
• 2015

The aim of this study is to investigate the relationship between Barcol hardness (H) and flexural modulus (E) degradation of composite sheets subjected to flexural fatigue. The resin transfer molding (RTM) method was used to produce 3-mm-thick composite sheets with fiber volume fraction of 44%. The composite sheets were subjected to flexural fatigue tests and Barcol scale hardness measurements. After these tests, the stiffness and hardness degradations were investigated in the composite sheets that failed after around one million cycles (stage III). Flexural modulus degradation values were in the range of 0.41-0.42 with the corresponding measured hardness degradation values in the range of 0.25-0.32 for the all fatigued composite sheets. Thus, a 25% reduction in the initial hardness and a 41% reduction in the initial flexural modulus can be taken as the failure criteria. The results showed that a reasonably well-defined relationship between Barcol hardness and flexural modulus degradation in the distance range.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.27-32
• /
• 2008

The laminated composite materials have been applied to various mechanical structures due to their high performance to weight ratios. In this study, we suggest a stochastic finite element scheme for the probabilistic analysis of the composite laminated plates. The composite materials consist of two different materials which constitute the matrix and fiber. The material properties in the major and minor directions are determined depending on the volume fraction of these two materials. In this study, the elastic modulus and shear modulus are considered as random and the effect of these random properties on the behavior of the composite plate is investigated. We adopt the weighted integral scheme in the formulation, which has been recognized as the most accurate method in the statistical methodologies. For verification of the proposed scheme, Monte Carlo analysis is also performed for the comparison with the proposed scheme.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.95-100
• /
• 2012

In this study, a novel Cu composite sheet with embedded high electric conduction path was developed as another alternative for the interconnect materials possessing high electrical conductivity as well as high strength. The Cu composite sheet was fabricated by forming Ag conduction paths not within the interior but on the surface of a high strength Cu substrate by damascene electroplating process. As a result, the electrical conductivity increased by 40% thanks to mesh type Ag conduction paths, while the ultimate tensile strength decreased by 20%. The interfacial fracture resistance of Cu composite sheet prepared by damascene electroplating increased by above 50 times compared to Cu composite sheet by conventional electroplating. For feasibility test for practical application, a leadframe for LED module was manufactured by a progressive blanking and piercing processes, and the blanked surface profile was evaluated as a function of the volume fraction of Ag conduction paths. As Ag conduction path became finer, pressing formability improved.

• Steel and Composite Structures
• /
• 제27권5호
• /
• pp.567-576
• /
• 2018

The objective of this work is to analyze large deflections of a fiber reinforced composite cantilever beam under point loads. In the solution of the problem, finite element method is used in conjunction with two dimensional (2-D) continuum model. It is known that large deflection problems are geometrically nonlinear problems. The considered non-linear problem is solved considering the total Lagrangian approach with Newton-Raphson iteration method. In the numerical results, the effects of the volume fraction and orientation angles of the fibre on the large deflections of the composite beam are examined and discussed. Also, the difference between the geometrically linear and nonlinear analysis of fiber reinforced composite beam is investigated in detail.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.220-223
• /
• 2003

The methodology of micromechanical finite element method (MFEM) is proposed to calculate the micromechanical strains on fiber and matrix under mechanical and thermal loadings. For micromechanical analysis, composite structure is idealized the square and hexagonal unit cells. Boundary conditions are determined to calculate the effective material properties of composites and the strain magnification matrix. And they are verified by comparing with the results from multi cells, and the strain distributions of the unit cells are in accordance with those of the multi cells. Finally, the effective material properties of composite structure are obtained with respect to its fiber volume fraction and compared with results from rules-of-mixture.