• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.136-137
• /
• 2005

• 한국재료학회지
• /
• 제20권7호
• /
• pp.392-400
• /
• 2010

The electrospinning process was established as a promising method to fabricate nano and micro-textured scaffolds for tissue engineering applications. A BCP-loaded PCL micro-textured scaffold thus can be a viable option. The biocompatibility as well as the mechanical properties of such scaffold materials should be optimized for this purpose. In this study, a composite scaffold of poly ($\varepsilon$-caprolactone) (PCL)-biphase calcium phosphate (BCP) was successfully fabricated by electrospinning. EDS and XRD data show successful loading of BCP nano particles in the PCL fibers. Morphological characterization of fibers shows that with a higher loaded BCP content the fiber surface was rougher and the diameter was approximately 1 to 7 ${\mu}m$. Tensile modulus and ultimate tensile stress reached their highest values in the PCL- 10 wt% BCP composite. When content of nano ceramic particles was low, they were dispersed in the fibers as reinforcements for the polymer matrix. However, at a high content of ceramic particles, the particles tend to agglomerate and lead to decreasing tensile modulus and ultimate stress of the PCL-BCP composite mats. Therefore, the use of nano BCP content for distribution in fiber polymer using BCP for reinforcement is limited. Tensile strain decreased with increasing content of BCP loading. From in vitro study using MG-63 osteoblast cells and L-929 fibroblast like cells, it was confirmed that electrospun PCL-BCP composite mats were biocompatible and that spreading behavior was good. As BCP content increased, the area of cell spreading on the surface of the mats also increased. Cells showed the best adherence on the surface of composite mats at 50 wt% BCP for both L-929 fibroblast-like cells and MG-63 osteoblast cell. PCL- BCP composites are a promising material for application in bone scaffolds.

• 한국임상수의학회지
• /
• 제27권4호
• /
• pp.325-329
• /
• 2010

본 연구에서는 hydroxyapatite/poly $\varepsilon$-caprolactone composite (HA/PCL) 지지체와 matrigel을 랫드의 두개골 결손부 모델에 함께 이식 시의 골형성 정도를 평가하였다. 두개골결손부는 Sprague Dawley rat (n = 18)에서 수술적으로 형성하였으며 실험군은 Matrigel과 함께 HA/PCL 지지체를 이식한 군(M-HA/PCL group, n = 6)과 HA/PCL 지지체단독이식군(HA/PCL group, n = 6)으로 나누었고 대조군(CD group, n = 6)에는 아무 것도 이식하지 않았다. 수술 4주 후, 골형성은 방사선촬영, micro CT 및 조직검사를 통해 평가되었다. 방사선상에서 CD군의 골형성은 관찰되지 않았으나 HA/PCL과 M-HA/PCL군에서는 관찰되었고 골과 유사한 방사선비투과성이 M-HA/PCL군에서 더 많이 관찰되었다. Micro CT 평가에서 골부피는 HA/PCL군보다 M-HA/PCL군에서 더 높았으나 두 군 사이의 유의적 차이는 관찰할 수 없었다. 그러나 골밀도에서는 HA/PCL군보다 M-HA/PCL군이 더 유의적으로 높음을 확인할 수 있었다(p < 0.05). 조직학적 검사에서는 CD군에서 새로운 골은 원래 존재하던 골로부터만 형성되었으며 두개골결손부 내의 골형성은 보이지 않았다. HA/PCL군에서 새로운 골형성은 원래 존재하던 골로부터만 유래되었으나 M-HA/PCL군은 가장 많은 골형성을 보여주었으며 새로운 골이 원래 존재하던 골과 HA/PCL지지체 주변에서도 관찰되었다. 이러한 결과로 미루어볼 때 HA/PCL 지지체와 matrigel을 함께 사용하는 것이 골의 임계결손부에서 골형성을 증대시키는 효과적인 방법이 될 수 있을 것으로 생각된다.

• Carbon letters
• /
• 제13권3호
• /
• pp.139-150
• /
• 2012

Poly-L-lactic acid (PLLA), PLLA/hydroxyapatite (HA), PLLA/multiwalled carbon nanotubes (MWNTs)/HA, PLLA/trifluoroethanol (TFE), PLLA/gelatin, and carbon nanofibers (CNFs)/${\beta}$-tricalcium phosphate (${\beta}$-TCP) composite membranes (scaffolds) were fabricated by electrospinning and their morphologies, and mechanical properties were characterized for use in bone tissue regeneration/guided tissue regeneration. MWNTs and HA nanoparticles were well distributed in the membranes and the degradation characteristics were improved. PLLA/MWNTs/HA membranes enhanced the adhesion and proliferation of periodontal ligament cells (PDLCs) by 30% and inhibited the adhesion of gingival epithelial cells by 30%. Osteoblast-like MG-63 cells on the randomly fiber oriented PLLA/TEF membrane showed irregular forms, while the cells exhibited shuttle-like shapes on the parallel fiber oriented membrane. Classical supersaturated simulated body fluids were modified by $CO_2$ bubbling and applied to promote the biomineralization of the PLLA/gelatin membrane; this resulted in predictions of bone bonding bioactivity of the substrates. The ${\beta}$-TCP membranes exhibit good biocompatibility, have an effect on PDLC growth comparable to that of pure CNF membrane, and can be applied as scaffolds for bone tissue regeneration.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1409-1410
• /
• 2008

Layer manufacturing technology has been recently spotlighted as a promising candidate to fabricate porous scaffolds for tissue engineering, because it can provide three dimensional interconnectivity and different pore structures and on-demand scaffold design. This study aims to fabricate HA/PCL composite scaffolds for bone tissue engineering by a layer manufacturing technology, paste extruding deposition, and to characterize in vitro and in vivo biocompatibilities of the scaffolds. This study discusses the mechnical properties, proliferation and differentiation of osteogenic cells, and tissue in-growth and bone regeneration behavior using animal models.

• Archives of Plastic Surgery
• /
• 제36권3호
• /
• pp.247-253
• /
• 2009

Purpose: Hydroxyapatite(HA) has been widely used due to its chemical similarity to bone and good biocompatibility. HA is composed of macropores and micropores. Too much irregularities of the micropores are ineffective against the adhesion and proliferation of osteoblast. Many efforts have been tried to overcome these drawbacks. HA crystal coating on the irregular surface of HA scaffold, crystallized HA, is one of the method to improve cell adhesion. Meanwhile, the collagen has been incorporated with HA to create composite scaffold that chemically resembles the natural extracellular matrix components of bone. The authors proposed to examine the effect of collagen - coated crystallized HA on the adhesion and proliferation of osteoblast. Method: HA powder containing $10{\mu}m$ pore size was manufactured as 1 cm pellet size. For the making crystallized HA, 0.1 M EDTA solution was used to dissolve HA powder and heated $100^{\circ}C$ for 48 hours. Next, the crystallized HA pellets were coated with collagen (0.1, 0.5, and 1%). The osteoblasts were seeded into HA pellets and incubated for the various times (1, 5, and 9 days). After the indicating days, methylthiazol tetrazolium (MTT) assay was performed for cell proliferation and alkaline phosphatase (ALP) activty was measured for bone formation. Result: In SEM study, the surface of crystallized HA pellet was more regular than HA pellet. MTT assay showed that the proliferation of osteoblasts increased in a collagen dose - dependent and time - dependent manner and had a maximum effect at 1% collagen concentration. ALP activity also increased in a collagen dose - dependent manner and had a highest effect at 1% collagen concentration. Conclusion: These data showed that crystallization and collagen coating of HA was effective for osteoblast proliferation and ALP activity. Therefore, our results suggest that crystallized - HA scaffold with collagen coating is may be a good strategy for tissue engineering application for bone formation.

• 폴리머
• /
• 제36권6호
• /
• pp.789-794
• /
• 2012

생체적합성 및 생분해성의 장점을 지닌 PLGA는 우수한 기계적 성질과 분해속도를 조절할 수 있는 장점을 가지고 있지만 소수성으로 인해 세포의 초기부착률이 낮고, 지지체 내부에 영양액의 공급이 원활하지 않다. 본 연구에서는 이러한 단점을 보완하고자 탈미네랄화된 골분(DBP, demineralized bone particle) 젤을 PLGA 지지체에 함침시켰다. 다양한 형태의 지지체 압축강도를 측정한 결과 PLGA/DBP 지지체가 연골과 비슷한 강도를 가지고 있었으며, 이를 바탕으로 DBP젤을 함침시킨 PLGA/DBP젤 지지체를 제작하였다. 연골세포를 파종하여 in vivo 실험을 진행하였고 조직화 정도를 확인하기 위해 H&E, Safranin-O, Alcian blue, Collagen type I 및 Collagen type II 염색을 실시하였다. 그 결과 DBP를 함침시킨 PLGA 지지체에서 GAG, Collagen type I 및 Collagen type II의 높은 발현과 조직화를 보여 연골조직으로 대체할 수 있는 가능성을 확인하였다.

• 세라미스트
• /
• 제21권3호
• /
• pp.216-232
• /
• 2018

The average life span is over 80 years of age, and various biomaterials have being studied. Many research institutes and companies around the world have been commercializing bioactive glass through R&D, however, there is not much research in Korea. Most bioactive glass is applied to bone regeneration in powder form due to its excellent bio-compatibility. Recently, new applications such as scaffolds for tissue engineering and nerve regeneration have been found in composite form. The global market size is not as large as US $ 556 million in 2019, but the growth rate is very high at a CAGR of 14.35 %. This field is waiting for the challenge of new researchers.

• Macromolecular Research
• /
• 제9권5호
• /
• pp.267-276
• /
• 2001

In order to endow with new bioactive functionality from demineralized bone particle (DBP) as natural source to poly(L-lactide) (PLA) synthetic biodegradable polymer, porous DBP/PLA as natural/synthetic composite scaffolds were prepared and compared by means of the emulsion freeze drying and solvent casting/salt leaching methods for the possibility of the application of tissue engineered bone and cartilage. For the emulsion freeze drying method, it was observed that the pore size decreased in the order of 79$\mu\textrm{m}$ (PLA control) > 47$\mu\textrm{m}$ (20% of DBP) > 23 $\mu\textrm{m}$ (40% of DBP) > 15$\mu\textrm{m}$ (80% of DBP). Porosities as well as specific pore areas decreased with increasing the amount of DBR. It can be explained that DBP acts like emulsifier resulting in stabilizing water droplet in emulsion. For the solvent casting/salt leaching method, a uniform distribution of well interconnected pores from the surface to core region were observed the pore size of 80 ∼70 $\mu\textrm{m}$ independent with DBP amount. Porosities as well as specific pore areas also were almost same. For pore size distribution by the mercury intrusion porosimeter analysis between the two methods, the pore size distribution of the emulsion freeze drying method was broader than that of the solvent casting/salt leaching method due to the mechanism of emulsion formation. Scaffolds of PLA alone, DBP/PLA of 40 and 80%, and DBP powder were implanted on the back of athymic nude mouse to observe the effect of DBP on the induction of cells proliferation by hematoxylin and eosin staining for 8 weeks. It was observed that the effect of DBP/PLA scaffolds on bone induction are stronger than PLA scaffolds, even though the bone induction effect of DBP/PLA scaffold might be lowered than only DBP powder, that is to say, in the order of DBP only > DBP/PLA scaffolds of 40 and 80% DBP > PLA scaffolds only for osteoinduction activity. In conclusion, it seems that DBP plays an important role for bone induction in DBP/PLA scaffolds for the application of tissue engineering area.

• Macromolecular Research
• /
• 제10권3호
• /
• pp.158-167
• /
• 2002

In order to endow with new bioactive functionality from small intestine submucosa (SIS) powder as natural source to poly (L-lactide) (PLA) and poly (lactide-co-glycolide) (PLGA) synthetic biodegradable polymer, porous SIS/PLA and SIS/PLGA as natural/synthetic composite scaffolds were prepared by means of the solvent casting/salt leaching methods for the possibility of the application of tissue engineered bone and cartilage. A uniform distribution of good interconnected pores from the surface to core region was observed the pore size of 40~500 ${\mu}{\textrm}{m}$ independent with SIS amount using the solvent casting/salt leaching method. Porosities, specific pore areas as well as pore size distribution also were almost same. After the fabrication of SIS/PLA hybrid scaffolds, the wetting properties was greatly enhanced resulting in more uniform cell seeding and distribution. Five groups as PGA non-woven mesh without glutaraldehyde (GA) treatment, PLA scaffold without or with GA treatment, and SIS/PLA (Code No.3 ; 1 : 12 of salt content, (0.4 : 1 of SIS content, and 144 ${\mu}{\textrm}{m}$ of median pore size) without or with GA treatment were implanted into the back of nude mouse to observe the effect of SIS on the induction of cells proliferation by hematoxylin and eosin, and von Kossa staining for 8 weeks. It was observed that the effect of SIS/PLA scaffolds with GA treatment on bone induction are stronger than PLA scaffolds, that is to say, in the order of PLA/SIS scaffolds with GA treatment > PLA/SIS scaffolds without GA treatment > PGA nonwoven > PLA scaffolds only with GA treatment = PLA scaffolds only without GA treatment for the osteoinduction activity. The possible explanations are (1) many kinds of secreted, circulating, and extracellular matrix-bound growth factors from SIS to significantly affect critical processes of tissue development and differentiation, (2) the exposure of SIS to GA resulted in significantly calcification, and (3) peri-implant fibrosis due to covalent bonding between collagen molecule by crosslinking reaction. In conclusion, it seems that SIS plays an important role for bone induction in SIS/PLA scaffolds for the application of tissue engineering area.