• 한국전기전자재료학회논문지
• /
• 제28권7호
• /
• pp.462-466
• /
• 2015

In this paper, we investigated the relations between dispersion of CNTs (carbon nanotubes) and electrical conductivity in the CNT/PVDF (polyvinylidene fluoride) composite film. By adding hydrophobic CNTs as filler into the PVDF matrix, we fabricated hydrophobic and electrically conducting polymer coating film. Dispersion of CNTs in the CNT/PVDF composite film plays a significant role in terms of electrical conductivity and wetting property. Spray coating method was used to form the CNT/PVDF composite films by injecting the dispersed CNTs in the PVDF solution with different weight ratios from 0.7 wt% to 7 wt%. We investigated the electrical properties and contact angles of the CNT/PVDF composite films with the CNT concentration. Finally we discussed the conducting mechanism and feasibility of the CNT/PVDF composite film for the conducting polymer films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.218-220
• /
• 1996

A composite films were prepared by using Polyphenylenediamine(PPD) synthesized in our lab. and crystalline V$_2$O$_{5}$ in various mixture ratio for using positive active material of polymer film battery. The thermal stability of prepared composite film was carried out by using TGA. Electrical conductivity of composite film were also measured by using four-probe method in dry box. The thermal stability of prepared composite film is more than 35$0^{\circ}C$. The electrical conductivity of composite film increased and showed the highest value(about 23 S/cm) when doped at 0.4% LiCiO$_4$solution.n.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2345-2351
• /
• 2012

Conductive honeycomb-patterned polystyrene (PS) thin films were prepared by the formation of a polyaniline (PANI) thin layer on the surface of the patterned PS thin films using simple one-step chemical oxidative polymerization of aniline. The in situ chemical oxidation polymerization of aniline hydrochloride solution on the patterned structure of the PS films was conducted in the presence of multiwalled carbon nanotubes (MWCNT) to prepare the PANI-MWCNT/PS composite film. The concentration (wt %) of MWCNT was varied in the range of 1%-3% by weight. The dependence of surface morphology of the PANI/PS and PANI-MWCNT/PS composite film to the polymerization time was observed by scanning electron microscopy. The room temperature DC conductivity was obtained by the four-probe technique. The conductivity of the PANI-MWCNT/PS composite film was affected both by the MWCNT concentration and polymerization time. In addition, DC electrical field was loaded during the oxidative polymerization to affect the distribution of the MWCNT included in the composite film, varying the loading voltage in the range of 0.1-3.0 V. The conductivity of the PANI-MWCNT/PS composite film was increased as loading voltage rose. However, this increase stops at a voltage higher than the critical value.

• 한국전기전자재료학회논문지
• /
• 제28권3호
• /
• pp.196-200
• /
• 2015

In this paper, we fabricated flexible antenna radiator using the CNT/PVDF (carbon nanotube / polyvinylidene fluoride) composite film. We used polymer film as a matrix material for the flexible devices, and introduced CNTs for adding conductivity into the film resulting in obtaining performances of the antenna radiator. Spray coating method was used to form the CNT/PVDF composite radiator, and pattern formation of the radiator was done by shadow mask during the spray coating process. We investigated the electrical properties of the CNT/PVDF composite films with the CNT concentration, and also estimated the radiator performance. Finally we discuss the feasibility of the CNT/PVDF composite radiator for the flexible antenna.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.548-548
• /
• 2012

Thermomechanical and surface chemical properties of composite films of poly(D, L-lactic-co-glycolic acid) (PLGA) were significantly improved by the addition of graphene oxide (GO) nanosheets as nanoscale fillers to the PLGA polymer matrix. Enhanced thermomechanical properties of the PLGA/GO (2 wt.%) composite film, including an increase in the crystallization temperature and reduction in the weight loss, were observed. The tensile modulus of a composite film with increased GO fraction was presumably enhanced due to strong chemical bonding between the GO nanosheets and PLGA matrix. Enhanced hydrophilicity of the composite film due to embedded GO nanosheets also improved the biocompatibility of the composite film. Improved thermomechanical properties and biocompatibility of the PLGA composite films embedded with GO nanosheets may be applicable to biomedical applications such as scaffolds.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.105-108
• /
• 1996

The positive active material for polymer film battery was prepared by using Polyphenylenediamine(PPD) synthesized in our lab. and 2.5-dimercapto-1, 3, 4-thiadiazole(DMcT) in various mixture ratio. The transference measurement of surface morphology and thermal stability of prepared composite film was carried out by using SEM and TGA, respectively. Electrocyhemical property and electrical conductivity of composite film were also measured by using cyclic voltammetry and four-probe method in dry box, respectively. The thermal stability of prepared composite film is more than 20$0^{\circ}C$. The electrical conductivity of composite film increased and showed the highest value(about 3 S/cm)when doped at 0.4% LiClO$_4$solution. And we could confirm that DMcT effect on reactiviation of PPD through cyclic voltammogram.

• 한국포장학회지
• /
• 제24권3호
• /
• pp.149-157
• /
• 2018

Low density polyethylene (LDPE) has been researched in many industrial applications, and LDPE/zeolite 4A composites has been extensively studied for many applications such as microporous, breathable film and so on. LDPE/zeolite composite have a great potential for carbon dioxide adsorption film due to its high adsorption ability. In this study, LDPE/zeolite 4A composites with various contents were prepared by melt mixing process, and co-extrusion process was applied to develop a $CO_2$ adsorption conventional film and foamed film. The thermal, rheological, mechanical, physical and morphological properties of composite films has been characterized, and $CO_2$ adsorption of the composite films evaluated by thermogravimetric analysis (TGA) and the performance was found to be about 18 cc/g at 30.9 wt% of the zeolite content.

• 한국전기전자재료학회논문지
• /
• 제28권11호
• /
• pp.727-730
• /
• 2015

In this paper, we fabricated organic compounds detector using the MWCNT/PMMA (multi-walled carbon nanotube / polymethylmethacrylate) composite film. We used polymer film as a matrix material for the device framework, and introduced CNTs for reacting with the organic compounds resulting in changing electrical conductivity. Spray coating method was used to form the MWCNT/PMMA composite film detector, and pattern formation of the detector was done by shadow mask during the spray coating process. We investigated changes of electrical conductivity of the detector before and after the organic compounds exposure. Electrical conductivity of the detector tended to decrease after the exposure with various organic compounds such as acetone, tetrahydrofuran (THF), toluene, and dimethylformamide (DMF). Finally we conclude that organic compounds detection by the MWCNT/PMMA composite film detector was possible, and expect the feasibility of commercial MWCNT/PMMA composite film detector for various organic compounds.

• 한국광학회지
• /
• 제20권4호
• /
• pp.241-248
• /
• 2009

액정 디스플레이에서 시야각 향상을 위해 사용하는 보상판과 편광판을 접합한 복합판의 광축 틀어짐 오차와 보상판의 $R_{in}$(in-plane retardation), $R_{th}$(out-of-plane retardation)를 동시에 결정하는 새로운 방법을 제시하였다. 보상판은 광축이 임의의 기울임각과 방위각을 갖는 o-판으로 하였으며, 확장된 존스 행렬법에 기반한 광학모델을 도입하여 복합판의 편광특성을 분석하였다. 입사각 0도와 50도에서 시료의 방위각을 360도 회전시키며 투과된 빛의 편광상태를 각각 계산한 후, 타원법의 모델링 분석기법을 적용하여 광축 틀어짐과 복합판의 기울임각과 방위각들을 역방계산하였다. 이 방법은 편광판과 보상판을 접합한 후에도 복합판의 성능평가를 할 수 있어 제조공정단계를 줄여 제조 원가를 절감하는데 기여할 수 있을 것으로 기대된다.

• 한국식품영양과학회지
• /
• 제45권5호
• /
• pp.778-781
• /
• 2016

본 연구에서는 폐기되는 성게 껍질을 이용한 생분해성 필름소재를 개발하고자 gelatin을 첨가한 복합필름 및 항산화, 항균성을 부여하기 위해 아까시 꽃 추출물(RFE)을 첨가한 필름을 제조하였다. 그 결과 gelatin 비율이 증가함에 따라 성게 껍질 필름의 인장강도가 증가하였고 신장률이 감소하였으며, 성게 껍질과 gelatin을 8:2 비율로 첨가하였을 때 최적의 물성을 보였다. 또한, 필름에 RFE를 첨가함에 따라 인장강도는 감소하였으나 신장률과 필름 투습도는 증가하였다. RFE 함유 성게 껍질 필름의 ABTS, DPPH 라디칼 소거능 측정과 디스크 확산법을 이용하여 항산화 및 항균 능력을 측정하였는데, RFE 농도가 증가함에 따라 항산화, 항균 능력이 향상하였다. 따라서 본 연구 결과, RFE를 첨가한 생분해 성게 껍질 필름은 적절한 물성과 함께 항산화, 항균 능력이 있기에 가공식품의 저장성을 증대시킬 수 있는 기능성 포장 소재로의 활용이 가능하다고 판단된다.