• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.403-406
• /
• 2002

The paper presents the componet parts and their models for the switched reluctance motor drive system with the angle position-current chopping control and with the fixed angle pulse width modulation control. The calculation of the parameters and the simulated models based on the MATHLAB SIMULINK software package are introduced by a four-phase 8/6 structure prototype with the four-phase asymmetric bridge ower converter. The simulation of the prototype in the course of starting is made by the simulated models at the different control strategies and speeds.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.5
• /
• pp.366-375
• /
• 2007

Although the STEP modularization is the major development methodology for STEP Application Protocol, there have been few studies on the STEP Modularization in Korea. The necessity of STEP Modularization research has been raised continuously. In addition, the importance became larger and larger because most of newly developing APs, including AP241, are developed using modularization approach. The object of this study is to investigate the basic structure and contents of AEC facilities related Application Modules using STEP Modularization. This study examines 1) the technical analysis regarding STEP Modularization, 2) application modules development regarding civil engineering elements of AP241; Aec_faciliteis_classification", "Aec_civil_item", and "Aec_civil_componet", 3) the developed application modules verification, and 4) the implementation methodology suggestion for application modules and modular AP.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1515-1519
• /
• 2010

본 연구는 설마천 유역($8.54km^2$)을 대상으로 준분포형 장기강우유출모형인 SWAT(Soil and Water Assessment Tool) 모형을 이용하여 유역의 수문학적 거동 특성을 규명하고자 하였다. SWAT모형의 적용을 위하여 지형자료(DEM, 토지이용도, 토양도)와 수문 및 기상관측자료를 이용하였다. 유출량, 증발산량에 대하여 각각 보정 및 검증을 통해 모형의 적용성 평가를 실시하였으며 그 결과 유출 및 증발산의 경향은 실측치의 경향과 비교적 비슷하였으나, 통계적인 상관성은 불안정한 경향을 보였으며, 특히 가을에 발생한 증발산량을 모형이 구현해 내지 못하는 결과를 보였다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.11
• /
• pp.813-818
• /
• 1987

In this paper, high resolution spectral estimation by AR modelling and principal comonent analysis is proposed. The given data can be expanded by the eigenvectors of the estimated covariance matrix. The eigenspectrum is obtained for each eigenvector using the Autoressive(AR) spectral estimation technique. The final spectrum estimate is obtained by weighting each eigenspectrum with the corresponding eigenvalue and summing them. Although the proposed method increases in computational complexity, it shows good frequency resolution especially for short data records and narrow-band data whose signal-to-noise ratio is low.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.337-339
• /
• 2003

This paper describes the SAR geocoding module, which is the sub-module of a IRHIS ('Integrated RS s/w for High resolution satellite ImageS'): package of 'Development of High Resolution Satellite Image Processing Technique' project in Electronics and Telecommunications Research Institute (ETRI). The function of this module is following. 1) Orbit Type : ERS1/ERS2, RADARSAT 2) Data Format : SAR CEOS Format(Single Look Complex) 3) Function: - Geocode : Generate a map projected SAR image based on only orbit information - Orthorectify: Generate a rigorous geocoded SAR image with a DEM information In this paper, we briefly describe the algorithm that is adopted to the functions, and component architecture.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.830-833
• /
• 2005

SDM(Structural Dynamics Modification) is to improve dynamic characteristics of a structure, more specifically of a base structure, by adding or deleting auxiliary(modifying) structures. In this paper, I will focus on the optimal layout of the stiffeners which are attached to the plate to maximize 1st natural frequency. Recently, a new topology method was proposed by yamazaki. He uses growing and branching tree model. I modified the growing and branching tree model. The method is designated modified tree model. To expand the layout of stiffeners, I will consider non-matching problem. The problem is solved by using local lagrange multiplier without the mesh regeneration. Moreover The CMS(Component mode synthesis) method is employed to reduce the computing time of eigen reanalysis using reduced componet models.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.6
• /
• pp.458-463
• /
• 2010

MLCC (multi-layer ceramic capacitor) is usually fabricated by lamination of predetermined number of single layers. Often, the state of MLCC before sintering is called the green state, whose strength comes from the adhesion between the dielectric material and the polymer binder. Therefore the lamination of a single layer before sintering can be easily deformed by environment due to the relatively lower strength. After the compression process, which helps single sheets cohereto with adjacent sheets, the MLCC green bar is preheated to resolve the probable internal stress. Unfortunately, unexpected deformation after preheating resulted in problems during cutting of the MLCC green bar. In this study, one of 2 primary hypotheses which were proposed to resolve the unexpected deformation after preheating was examined by quantitative experiment with GC/MS (gas chromatograpy/mass spectrometer). The proportion of deformation caused by DOP evaporation, which was primarily evaporated componet during preheating, to the total deformation of the MLCC green bar was found to be 53%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.197-199
• /
• 2021

High speed railway system is progressed to SRN(Smart Railway Network) having entirely automation function beyond each componet automations. It is necessity to use mobile communication technology of LTE-R(Long Term Evolution - Railway) and 5G-R(5th Generation - Railway) and information technology of convergence based on AI, Big Data, Deep Learning to construct this smart railway networks. In this paper, a communication structure is suggested for SRN. This suggested communication structure for SRN is composed to include safety operation of high speed train, railway system management and customer services, and also have complexing function of these each functions. Results of this study can be used for SRN construction and opeation, and development of railway communication standards.

• Korean Journal of Materials Research
• /
• v.24 no.9
• /
• pp.502-507
• /
• 2014

Recently, improvement in the conversion efficiency of silicon-based solar cells has been achieved by decreasing emitter doping concentration, because the lightly doped emitter can effectively prevent the recombination of electrons and holes generated by solar light irradiation. This type of emitter is very thin due to the low doping concentration, thus conductive materials (i.e., silver) used for front electrodes can easily penetrate the emitter during a firing process because of their large diffusivity in silicon. This results in junction leakage currents which might reduce cell efficiencies. In this study, $Al_2O_3$-coated Ag powders were synthesized by an ultrasonic spray pyrolysis method and applied to the conductive materials of the front electrode to control the junction leakage current. The $Al_2O_3$ shell obstructs the Ag diffusion into the emitter during the firing process. The powder is spherical with a core-shell structure and the thickness of the $Al_2O_3$ shell is tens of nanometers. Solar cells were fabricated using pure Ag powders or the $Al_2O_3$-coated Ag powder as front electrode materials, and the conversion efficiency and junction leakage current were compared to investigate the role of the $Al_2O_3$ shell during the firing processes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1444-1449
• /
• 2006

Korea is about 70% of all country to mountain, and basin is consisted of various terrain, soil, vegetation, land use etc. because use land as intensive. Also, need basin hydrologic model that can analysis base outflow as well as outflow directly for calculation of discharge to establish irrigation plan. Inconvenient in use method and user interface offer side is causing by way that existing USGS WEASEL runs in PC Arc/Info, and ArcGIS with development of present GIS technology is applied in many fields offering convenience in analysis that use GIS. In this research, wished to develop suitable outflow parameter extraction system, For this, develop pre-processor and post-processor that effectively draw of hydrologic model input data from water resources DB through van example benchimarking, and developed input/output component of GIS base applicable to various hydrologic and water quality model.