• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.181-183
• /
• 2002

Complete load model of the substation not only should include the performances of the load components, but also should take into consideration the core losses of transformers, the line losses and the capacitor banks. In an actual distribution system, the control scheme of capacitor banks are so complex and is difficult to identify actual values for the reactive powers of capacitor banks. This research improves on this drawback by applying component-based modeling method including a capacitor banks in distribution systems. Initial differences between the model results and the actual values for reactive powers are later decreased by the proposed method.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.2
• /
• pp.143-151
• /
• 2016

This paper presents new prediction methods to improve compression performance of the so-called near-lossless RGB-domain image coder, which is designed to effectively decrease the memory bandwidth of a system-on-chip (SoC) for image processing. First, variable block size (VBS)-based intra prediction is employed to eliminate spatial redundancy for the green (G) component of an input image on a pixel-line basis. Second, inter-color prediction (ICP) using spectral correlation is performed to predict the R and B components from the previously reconstructed G-component image. Experimental results show that the proposed algorithm improves coding efficiency by up to 30% compared with an existing algorithm for natural images, and improves coding efficiency with low computational cost by about 50% for computer graphics (CG) images.

• Transactions of the Society of Information Storage Systems
• /
• v.8 no.1
• /
• pp.16-21
• /
• 2012

SAW device is widely used as filters, sensors, actuators in various technologies. And capacitive sensor is tremendously used to measure pressure, gap, etc. The application of SAW device as signal conditioner of capacitive sensor reduces noise level and enables high precision measurement. The response increase of SAW based capacitive sensor is produced just before the two capacitive electrode contacts by the existence of parasitic resistance of capacitive electrode. In this paper, we analyze the effects of parasitic resistance and propose the calibrating method using lumped component and execute the high precision gap measurement using calibrated system. And xx nm resolution and yy ${\mu}m$ stroke was attained.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.11
• /
• pp.1301-1305
• /
• 2009

The evolution of living organisms occurs via a combination of highly complicated processes that involve modification of various features such as appearance, metabolism and sensing systems. To understand the evolution of life, it is necessary to understand how each biological feature has been optimized in response to new environmental conditions and interrelated with other features through evolution. To accomplish this, we constructed contents-based trees for a two-component system (TCS) and metabolic network to determine how the environmental communication mechanism and the intracellular metabolism have evolved, respectively. We then conducted a comparative analysis of the two trees using ARACNE to evaluate the evolutionary and functional relationship between TCS and metabolism. The results showed that such integrated analysis can give new insight into the study of bacterial evolution.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.3
• /
• pp.1-10
• /
• 2011

In this paper, we implemented the Android NDK porting application with Eclipse(JDK) ADT and TinyOS 2.0. TinyOS and Cygwin are component based embedded system and an Open-source basis for interfacing with sensor application from H-mote. Cygwin is a collection of tools for using the Linux environment for commercially released with x86 32 bit and 64 bit versions of Windows. TinyOS-2. x is a component based embedded OS by UC Berkeley and is an Open-source OS designed for interfacing the sensor application with specific C-language. The results of Android porting experiment are described to show the improvement of sensor interfacing functionality under the PXA320 embedded RTOS platform. We will further more develop the software programming of Android porting under Embedded platform and enhance the functionality of the Android SDK with mobile gaming and kernel programming under sensor interfacing activity.

• Annual Conference of KIPS
• /
• 2003.05c
• /
• pp.1705-1708
• /
• 2003

오늘날의 컴퓨팅 시스템은 비즈니스 거래와 분산 업무 처리로 확대되어가고 있으며 정보 기술은 점차적으로 재사용성과 독립성 그리고 이식성을 가진 컴포넌트를 기반으로 한 응용 개발이 확산되고 있다. 컴포넌트 개발 형태는 코드의 재사용이나 클래스 라이브러리보다 좀 더 발전된 형태의 부품개발 형태로서, CBD(Component Based Development)를 기초로 한다. 그러나 CBD를 이용하여 새로운 컴포넌트를 구축하는 비용의 증가와 함께 비즈니스 요구사항에 맞는 컴포넌트 개발을 위한 노력이 필요하며, 빠르고 정확한 컴포넌트 정보를 지원할 수 있도록 시스템 측면에서 정규화 형태의 컴포넌트 모델이 요구되고 있다. 본 논문에서는 사용자 요구사항에 접근하고, 재사용성과 독립성, 그리고 이식성을 가진 컴포넌트를 추출하고, 컴포넌트를 대상으로 인터페이스 나타내고자 한다. 따라서 본 논문에서는 대학 종합정보시스템 구축의 일부분인 구매관리 시스템을 분석 및 설계하여, 컴포넌트를 추출하고 컴포넌트 설계 모델을 제시한다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.9-14
• /
• 2002

We propose a new algorithm for blind source separation (BSS), in which frequency-domain independent component analysis (FDICA) and time-domain ICA (TDICA) are combined to achieve a superior source-separation performance under reverberant conditions. Generally speaking, conventional TDICA fails to separate source signals under heavily reverberant conditions because of the low convergence in the iterative learning of the inverse of the mixing system. On the other hand, the separation performance of conventional FDICA also degrades significantly because the independence assumption of narrow-band signals collapses when the number of subbands increases. In the proposed method, the separated signals of FDICA are regarded as the input signals for TDICA, and we can remove the residual crosstalk components of FDICA by using TDICA. The experimental results obtained under the reverberant condition reveal that the separation performance of the proposed method is superior to that of conventional ICA-based BSS methods.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.213-214
• /
• 2014

This paper compares two instantaneous reactive power definitions in DFIG wind turbine with a back-to-back three-level neutral-point clamped voltage source converter under unbalanced grid conditions. In general, conventional definition of instantaneous reactive power is obtained by taking an imaginary component of complex power. The other definition of instantaneous reactive power can be developed based on a set of voltages lagging the grid input voltages by 90 degree. A complex quantity referred as a quadrature complex power is defined. Proposed definition of instantaneous reactive power is derived by taking a real component of quadrature complex power. The characteristics of two instantaneous reactive power definitions are compared using the ripple-free stator active power control algorithm in DFIG. Instantaneous reactive power definition based on quadrature complex power has a simpler current reference calculation control block. Ripple of instantaneous active and reactive power has the same magnitude unlike in conventional definition under grid unbalance. Comparison results of two instantaneous reactive power definitions are verified through simulation.

• Journal of Multimedia Information System
• /
• v.5 no.2
• /
• pp.87-90
• /
• 2018

Various approaches have been proposed to convert low dynamic range (LDR) to high dynamic range (HDR). Of these approaches, the Multi Scale Fusion (MSF) algorithm based on Laplacian pyramid decomposition is used in many applications and demonstrates its usefulness. However, the pyramid fusion technique has no means for controlling the luminance component because the total number of pixels decreases as the pyramid rises to the upper layer. In this paper, we extract the reflection light of the image based on the Retinex theory and generate the weight map by adjusting the reflection component. This weighting map is applied to achieve an MSF-like effect during image fusion and provides an opportunity to control the brightness components. Experimental results show that the proposed method maintains the total number of pixels and exhibits similar effects to the conventional method.

• The Journal of Society for e-Business Studies
• /
• v.8 no.1
• /
• pp.103-111
• /
• 2003

Nowadays XML is used for exchanging information in e-Commerce, especially B2B. Necessity of XML DBMS has being increased to efficiently process XML data. So a lots of database products for supporting XML are rapidly appeared in the market. In this paper, we made an XML DBMS system based on Generic Data Model. First we developed XML Adaptor based on Generic Data Model and added it on relational DBMS for developing XML DBMS. XML Adaptor is composed of Query Convertor and XML Repository System. The Query Convertor parse commands that are for XML data manipulation and then call the relevant component of XML Repository System for relational database operation. The XML Repository System handles relational database operations such as create, delete, store, and etc. In this way we can use a relational DBMS for manipulation XML data. Therefor we can build more economically XML DBMS.