• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.104-111
• /
• 2000

A fuzzy logic Run-by-Run(RbR) controller and an in -line wafer characteristics prediction scheme for the rapid thermal processing system have been developed for the study of process repeatability. The fuzzy logic RbR controller provides a framework for controlling a process which is subject to disturbances such as shifts and drifts as a normal part of its operation. The fuzzy logic RbR controller combines the advantages of both fuzzy logic and feedback control. It has two components : fuzzy logic diagnostic system and model modification system. At first, a neural network model is constructed with the I/O data collected during the designed experiments. The wafer state after each run is assessed by the fuzzy logic diagnostic system with featuring step. The model modification system updates the existing neural network process model in case of process shift or drift, and then select a new recipe based on the updated model using genetic algorithm. After this procedure, wafer characteristics are predicted from the in-line wafer characteristics prediction model with principal component analysis. The fuzzy logic RbR controller has been applied to the control of Titanium SALICIDE process. After completing all of the above, it follows that: 1) the fuzzy logic RbR controller can compensate the process draft, and 2) the in-line wafer characteristics prediction scheme can reduce the measurement cost and time.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.11
• /
• pp.495-501
• /
• 2006

Diagnostics of unborn baby is mainly aimed at prediction and detection of occurrence of intrauterine hypoxia. Consequences resulting from fetal hypoxia appear in its heart activity. In this study, we have developed a new non-invasive system for fetal hypoxia diagnosis which provides systolic time interval(STI) parameters on the basis of analysis of electrical and mechanical heart activity together. For this we have worked on 1) the proper lead system for the acquisition of abdominal ECG, 2) the independent component analysis based signal processing and fetal ECG separation, 3) the development of a hardware which consists of an abdominal ECG amplifying module and an ultrasound module and 4) the detection of characteristic points of FECG and Doppler signal and the extraction of diagnostic parameters. The developed system was evaluated by the clinical experiments in which 33 subjects were participated. The acquired STI by the system were distributed within the ranges from the well-established invasive results of other researchers. From this, we can conclude that the developed non-invasive fetal hypoxia diagnosis system is useful.

• Journal of Applied Reliability
• /
• v.17 no.4
• /
• pp.332-342
• /
• 2017

Purpose: In this study, the lifetime distribution of a k-out-of-n system with heterogeneous components is suggested as Markov model, and the time-to-failure (TTF) distribution of each component is considered as phase-type distribution (PHD). Furthermore, based on the model, a redundancy allocation problem with a mix of components (RAPMC) is proposed. Methods: The lifetime distribution model for the system is formulated by the structured Markov chain. From the model, the various information on the system lifetime can be ascertained by the matrix-analytic (or-geometric) method. Conclusion: By the generalization of TTF distribution (PHD) and the consideration of heterogeneous components, the lifetime distribution model can delineate many real systems and be exploited for developing system operation policies such as preventive maintenance, warranty. Moreover, the effectiveness of the proposed RAPMC is verified by numerical experiments. That is, under the equivalent design conditions, it presented a system with higher reliability than RAP without component mixing (RAPCM).

• Nuclear Engineering and Technology
• /
• v.42 no.6
• /
• pp.608-619
• /
• 2010

A multi-scale analysis of water-cooled reactor thermalhydraulics can be used to take advantage of increased computer power and improved simulation tools, including Direct Numerical Simulation (DNS), Computational Fluid Dynamics (CFD) (in both open and porous mediums), and system thermalhydraulic codes. This paper presents a general strategy for this procedure for various thermalhydraulic scales. A short state of the art is given for each scale, and the role of the scale in the overall multi-scale analysis process is defined. System thermalhydraulic codes will remain a privileged tool for many investigations related to safety. CFD in porous medium is already being frequently used for core thermalhydraulics, either in 3D modules of system codes or in component codes. CFD in open medium allows zooming on some reactor components in specific situations, and may be coupled to the system and component scales. Various modeling approaches exist in the domain from DNS to CFD which may be used to improve the understanding of flow processes, and as a basis for developing more physically based models for macroscopic tools. A few examples are given to illustrate the multi-scale approach. Perspectives for the future are drawn from the present state of the art and directions for future research and development are given.

• The KIPS Transactions:PartD
• /
• v.12D no.3 s.99
• /
• pp.385-394
• /
• 2005

In the component-based software development environment, it is important for developers who compose components to provide the information of dependence relationship between components. However it is not provided the information of dependence relationship of components. Therefore, it happens that the developer occasionally composes the components without knowing the dependence relation between the primitive components. In order to complement these disadvantages, In this paper, the design and implementation of dependence manager which provides the component dependence information for the development of integrity and persistence information system are established by defining the information about the dependence and relation between components as XML, managing them and providing a developer with the information about the dependence relationship between primitive components, we can establish. The components being created in the dependence manager show that the figure of reused matrix measurement is indicated from $89\%\;to\;95\%$, being included in confidence limits.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.24-33
• /
• 2004

Advances in remote sensing technologies are resulting in the rapid increase of the number of spectral channels, and thus, growing data volumes. This creates a need for developing faster techniques for processing such data. One application in which such fast processing is needed is the dimension reduction of the multispectral data. Principal component transformation is perhaps the mostpopular dimension reduction technique for multispectral data. In this paper, we discussed the processing procedures of principal component transformation. And we presented and discussed the results of the principal component transformation of the multispectral data. Moreover principal components image data are classified by the Maximum Likelihood method and Multilayer Perceptron method. In addition, the performances of two classification methods and data reduction effects are evaluated and analyzed based on the experimental results.

• Microbiology and Biotechnology Letters
• /
• v.48 no.1
• /
• pp.24-31
• /
• 2020

Five genes (mxbDM, mxcQE and mxaB) are responsible for the transcription of methanol oxidation genes in Methylobacterium strains. Among these, MxbDM and MxcQE constitute the two-component system (TCS) regulating methanol metabolism. In this study, we integrated the methanol-sensing domain of MxbD and MxcQ with the EnvZ/OmpR from Escherichia coli. The domain-swapping strategy resulted in chimeric histidine kinases (HK's) MxbDZ and MxcQZ AM1 containing recombinant E. coli. Real-time quantitative PCR was used to monitor OmpC expression mediated by the chimeric HK and response regulator (RR) OmpR. Further, an ompC promoter based fluorescent biosensor for sensing methanol was developed. GFP fluorescence was studied both qualitatively and quantitatively in response to environmental methanol. GFP measurement also confirmed ompC expression. Maximum fluorescence was observed at 0.05% methanol and 0.01% methanol using MxbDZ and MxcQZ AM1, respectively. Thus the chimeric HK containing E. coli were found to be highly sensitive to methanol, resulting in a rapid response making them an ideal sensor.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.1
• /
• pp.53-59
• /
• 1997

Current CAD systems used in the AEC community have some critical problems. One of them is that they hardly support design collaboration. Thus designers and engineers are hard to transfer design knowledge from one discipline to another. What we need is a common building database which creates and manages building plans/models and relevant design knowledge consistently and effectively. This paper presents a powerful CAD editor, called UNIFORM, which is being developed. Currently UNIFORM includes three main modules: a plan generator, a 3-D model generator, and component databases. A plan generator, called UNIFORM PLANNER, creates a plan which contains semantically-rich information of building. Each component in the plan can be presented in various ways and connected to component databases that contain knowledge of building components such as windows, doors, walls, etc. Based on the plan UNIFORM MODELER, another module of the program, generates a three dimensional building model which could be a multiple-story building. One of the main ideas behind the system is that it generates and maintains a common building form that can be easily delivered to other members of the project team. Thus it is expected to increase system integration, team interactions, and productivity.

• Journal of Korea Multimedia Society
• /
• v.23 no.2
• /
• pp.274-281
• /
• 2020

The use of information systems improves a company's service quality and provides efficient information management. The establishment of an information system has become an essential element. In designing and developing a large number of screens when building an information system, As the number of screens increases, so does the cost and time. In addition, modifications can increase the cost of maintenance and exceed the cost of development. In order to solve these problems, there have been studies to design the screen simply and easily, but there is a shortage in reducing the maintenance cost. In this paper, we have studied the layout algorithm for managing the attributes of the screen components as data structures based on the designed screen and arranging the components on the screen. And we compared the proposed method and the methods that have been studied in the related studies. Screen component layout methods can automatically deploy screen components to consistently develop a large number of screens and reduce cost and manpower by reducing the time it takes to deploy screens.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.2
• /
• pp.138-143
• /
• 2005

During faults, the voltage and current signals available to the relay are affected by the decaying dc component and harmonics. In order to make appropriate and accurate decisions, most of the relaying algorithms require the fundamental frequency phasor information that is immune to decaying dc effect and harmonics. The conventional Fourier ph as or estimation algorithm is affected by the presence of decaying-exponential transients in the fault signal. This paper presents a modified Fourier algorithm, which effectively eliminates the decaying dc component and the harmonics present in the fault signal. The decaying dc parameters are estimated by means of an out-of-band filtering technique. The decaying dc offset and harmonics are removed by means of a simple computational procedure that involves the design of two sets of Orthogonal digital OFT filters tuned at different frequencies and by creating three off-line look-up tables. The technique was tested for different decay rates of the decaying dc component. It was also compared with the conventional mimic plus the full cycle OFT algorithm. The results indicate that the proposed technique has a faster convergence to the desired value compared to the conventional mimic plus OFT algorithms over a wide range of decay rates. In all cases, the convergence to the desired value was achieved within one cycle of the power system frequency.