• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.309-310
• /
• 2009

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.157-166
• /
• 2016

In this paper, a new sag and peak voltage detector is proposed for a single-phase inverter using delta square operation. The conventional sag detector is from a single-phase digital phase-locked loop (DPLL) that is based on d-q transformations using an all-pass filter (APF). The d-q transformation is typically used in the three-phase coordinate system. The APF generates a virtual q-axis voltage component with a 90° phase delay, but this virtual phase cannot reflect a sudden change in the grid voltage at the instant the voltage sag occurs. As a result, the peak value is drastically distorted, and it settles down slowly. A modified APF generates the virtual q-axis voltage component from the difference between the current and the previous values of the d-axis voltage component in the stationary reference frame. However, the modified APF cannot detect the voltage sag and peak value when the sag occurs around the zero crossing points such as 0° and 180°, because the difference voltage is not sufficient to detect the voltage sag. The proposed algorithm detects the sag voltage through all regions including the zero crossing voltage. Moreover, the exact voltage drop can be acquired by calculating the q-axis component that is proportional to the d-axis component. To verify the feasibility of the proposed system, the conventional and proposed methods are compared using simulations and experimental results.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.856-864
• /
• 2008

This paper describes a vehicle low speed driving assistant (VLDA) system that is composed of laser scanner. This vehicle is designed for following lead vehicle (LV) without driver's operation. The system is made up several component systems that are based on unmanned ground vehicle (UGV). Each component system is applied to use advanced safety vehicle developed to complete UGV system. VLDA system was divided into vehicle control system and obstacle detecting system. The obstacle detecting system calculate distance and angle of LV and transmit these data to vehicle control system using front, left and right laser scanners. Vehicle control system makes vehicle control values such as steering angle, acceleration and brake position and control vehicle's movement with steering, acceleration and brake actuators. In this research, we designed VLDA system like as low speed cruise control system and test it on real road environments.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.6
• /
• pp.614-629
• /
• 2001

As the information-intensive society in 21c based on the environment of global internet is promoted, the software is getting more large and complex, and the demand for the software is increasing briskly. So, it becomes an important issue in academic and industrial field to activate reuse by developing and exchanging the standardized component. Currently, the information services as a product type of each company are provided in foreign market place for reusing a commercial component, but the components which are serviced in each market place are different, insufficient and unstandardized. That is, construction for Component Data Registry based on ISO 11179, is not accomplished. Hence, the national government has stepped up the plan for sending out public component at 2001. Therefore, the systems as a tool for sharing and exchange of data, have to support the meta-information of standardized component. In this paper, we will propose the C_MDR system: a tool to register and manage the standardized meta-information, based upon ISO 11179, for the commercialized common component. The purpose of this system is to systemically share and exchange the data in chain of acceleration of reusing the component. So, we will show the platform of specification for the component meta-information, then define the meta-information according to this platform, also represent the meta-information using XML for enhancing the interoperability of information with other system. Moreover, we will show that three-layered expression make modeling to be simple and understandable. The implementation of this system is to construct a prototype system of the component meta-information through the internet on www, this system uses ASP as a development language and RDBMS Oracle for PC. Thus, we may expect the standardization of the exchanged component metadata, and be able to apply to the exchanged reuse tool.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.574-579
• /
• 2002

This paper proposes the method to develop information system for maintenance of urban transit. We have to develop the standard information system, but have difficult to get user's requirement. To solve this problem, we propose the method, web-based, component-based, and prototype-based development method. Proposed method may provide a procedure to develop information system that have hard to get user's requirement.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.36 no.1
• /
• pp.39-55
• /
• 2011

Process monitoring has been emphasized for the monitoring of complex system such as chemical processing industries to achieve the efficiency enhancement, quality management, safety improvement. Recently, ICA (Independent Component Analysis) based MSPC (Multivariate Statistical Process Control) was widely used in process monitoring approaches. Moreover, DICA (Dynamic ICA) has been introduced to consider the system dynamics. However, the existing approaches show the limitation that their performances are strongly dependent on the statistical distributions of control variables. To improve the limitation, we propose a novel approach for process monitoring by integrating DICA and LOF (Local Outlier Factor). In this paper, we aim to improve the fault detection rate with the proposed method. LOF detects local outliers by using density of surrounding space so that its performance is regardless of data distribution. Therefore, the proposed method not only can consider the system dynamics but can also assure robust performance regardless of the statistical distributions of control variables. Comparison experiments were conducted on the widely used benchmark dataset, Tennessee Eastman process (TE process), and showed the improved performance than existing approaches.

• The Journal of Korean Association of Computer Education
• /
• v.4 no.2
• /
• pp.115-123
• /
• 2001

In the early stage of Web-based Instruction, it didn't gain preference in spite of it's benefit of convenience. The main reason is, I think, the lack of generality at the education system which eventually results in unsatisfactory facilities compared with the requirement of teachers and students. And the early systems don't make good use of the plenty data in distributed environment, and don't show so good reliablity due to lack of systematic design and development. In this paper, we suggest WBI developing technology using the concept of WBSE. WBI developing is consist of component of pre-developed education software, integration of component using its reusability, and production of more requirement-satisfactory education software.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.9
• /
• pp.621-628
• /
• 2013

This paper presents a framework for context-aware smart phone applications based on Android. The mobile context-aware system is composed of a low level context collection module, a high level context generation module and a service provision module. Existing android system cannot provide an appropriate application framework to integrate these independent modules. In this paper, we provide an application framework which make each module a component, and provide appropriate services to each component. This framework hides the Android platform, so that the complexity for organical combination can be minimized and the application developers can make the mobile context-aware applications easily.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.2 s.6
• /
• pp.21-43
• /
• 2001

The environment to development information system including a GIS has been drastically changed in recent years in the perspectives of the complexity and diversity of the software, and the distributed processing and network computing, etc. This leads the paradigm of the software development to the CBD(Component Based Development) based object-oriented technology. As an effort to support these movements, OGC has released the abstract and implementation standards to enable approaching to the service for heterogeneous geographic information processing. It is also common trend in domestic field to develop the GIS application based on the component technology for municipal governments. Therefore, it is imperative to adopt the component technology considering current movements, yet related research works have not been made. This research is to propose a component-based GIS development methodology-ATOM(Advanced Technology Of Methodology)-and to verify its adoptability through the case study. ATOM can be used as a methodology to develop component itself and enterprise GIS supporting the whole procedure for the software development life cycle based on conventional reusable component. ATOM defines stepwise development process comprising activities and work units of each process. Also, it provides input and output, standardized items and specs for the documentation, detailed instructions for the easy understanding of the development methodology. The major characteristics of ATOM would be the component-based development methodology considering numerous features of the GIS domain to generate a component with a simple function, the smallest size, and the maximum reusability. The case study to validate the adoptability of the ATOM showed that it proves to be a efficient tool for generating a component providing relatively systematic and detailed guidelines for the component development. Therefore, ATOM would lead to the promotion of the quality and the productivity for developing application GIS software and eventually contribute to the automatic production of the GIS software, the our final goal.

• Journal of Broadcast Engineering
• /
• v.19 no.6
• /
• pp.819-825
• /
• 2014

In this paper, monaural ambient component extraction algorithm based on nonnegative matrix factorization (NMF) is described. The ambience component extraction algorithm in this paper is developed for audio upmixing system; Recent researches have shown that they can enhance listener envelopment if the extracted ambient signal is applied into the multichannel audio upmixing system. However, the conventional method stores all of the audio signal and processes all at once, so it cannot be applied to streaming system and digital signal processor (DSP) system. In this paper, the ambient component extraction algorithm based on on-line nonnegative matrix factorization is developed and evaluated to solve the problem. As a result of analysis of the processed signal with spectral flatness measures in the experiment, it was shown that the developed system can extract the ambient signal similarly with the conventional batch process system.