• Journal of Wetlands Research
• /
• v.6 no.1
• /
• pp.133-147
• /
• 2004

Environmental quality(water and sediment) was analyzed in the tidal flat of Saemangum of Jeonbuk Province, the west coast of Korea, using the 101 sediment samples and 69 water samples collected in September 4~13, 2001. Major water quality parameters with the means of 69 surface water samples are as follows; $25.51{\pm}0.68^{\circ}C$ for water temperature, $29.88{\pm}5.01$ for salinity, $1.40{\pm}0.78mg/L$ for COD, $0.352{\pm}0.417mg/L$ for DIN, and $0.027{\pm}0.023mg/L$ for phosphate, respectively. Higher values were found at the subestuary of Dongjin and Mangyung River, and lower values at the Saemangum embayment and Gomso Bay. There was a significant negative correlation between salinity and the other water quality parameters(p<0.0001) such as COD, nutrients, SS and N/P. This correlation suggested that the major pollution sources be from terrestrial inputs through tributaries in this area. Principal component analysis clearly revealed a spatial variation of water quality; stations with higher values of nutrients and COD located subestuary of tributaries. 14 sediment quality parameters including 8 trace metals were measured using the 101 surface sediment samples. Average values for the parameters are as follows; Al $2.28{\pm}0.92%$, Cd $0.61{\pm}0.27ppm$, Cu $8.95{\pm}4.06ppm$, Fe $1.19{\pm}0.37%$, Mn $182.31{\pm}77.45ppm$, Ni $10.83{\pm}4.97ppm$, Pb $15.20{\pm}4.35ppm$, Zn $41.34{\pm}34.62ppm$, COD $2.68{\pm}1.85mg/g\;dry$, AVS $0.04{\pm}0.08mg/g\;dry$, IL $1.29{\pm}1.08%$, water content $24.11{\pm}4.49%$, TN $0.02{\pm}0.02%$, TC $0.22{\pm}0.30%$. Spatial variations of sediment quality were not clear as water quality. Some higher values were found at the subestuary of Gum River and lower values at the other area. There was a significant positive correlation between the heavy metal concentrations and organic materials within the sediment(p<0.05). Enrichment factors showed the ranges of 1~2 for most of the metals in the sediment except zinc(1~6), indicating no serious exogenous input of heavy metals in the study area. Also, the heavy metal concentrations in the sediment were within the ranges found at the natural marine environments.

• Korean Journal of Ecology and Environment
• /
• v.50 no.4
• /
• pp.441-451
• /
• 2017

The present study was conducted from August to December 2016 in a cylindrical water tank with a diameter of 1 m, a height of 4 m and a capacity of 3,000 L. The field water and sediment from the Nakdong River were also sampled for the experimental culture (field water+sediment) and control culture (field water), respectively. In this study, we aimed to investigate phytoplankton succession pattern using the phytoplankton functional group in the enclosed culture system. A total of 50 species in 27 genera including Chlorophyceae (30 species), Bacillariophyceae (11 species), Cyanophyceae (7 species), and Cryptophyceae (2 species) were identified in the experimental and control culture systems. A total of 19 phytoplankton functional groups (PFGs) were identified, and these groups include B, C, D, F, G, H1, J, K, Lo, M, MP, N, P, S1, $T_B$, $W_0$, X1, X2 and Y. In particular, $W_0$, J and M groups exhibited the marked succession in the experimental culture system with higher biovolumes compared to those of the control culture system, which may be related to the internal cycling of nutrients by sediment in the experimental culture system. The principal component analyses demonstrated that succession patterns in PFG were associated with the main environmental factors such as nutrients(N, P), water temperature and light intensity in two culture systems. In conclusion, the present study showed the potential applicability of the functional group for understanding the adaptation strategies and ecological traits of the phytoplankton succession in the water bodies of Korea.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.1
• /
• pp.66-75
• /
• 2014

This study aims to understand environmental factors that determine spatial distribution of macrozoobenthic community in the southern area (ca 100-500 m depth) of East Sea, Korea, known as a candidate site for carbon storage under the seabed. From sixteen locations sampled in the summer of 2012, a total of 158 species were identified, showing density of $843indiv/m^2$ and biomass of $26.2g\;WW/m^2$, with increasing faunal density towards biologically higher diverse locations. Principal component analysis showed that a total of 33 environmental parameters were reduced to three principal components (PC), indicating sediment, bottom water, and depth, respectively. As sand content was increasing, number of species increased but biomass decreased. Six dominant species including two bivalve species favored high concentrations of ${\Omega}$ aragonite and ${\Omega}$ calcite, indicating that the corresponding species can be severely damaged by ocean acidification or $CO_2$ effluent. Cluaster analysis based on more than 1% density dominant species classified the entire study area into four faunal assemblage (location groups), which were delineated by characteristic species, including (A) Ampelisca miharaensis, (B) Edwardsioides japonica, (C) Maldane cristata, (D) Spiophanes kroeyeri, and clearly separated in terms of geography, bottom water and sediment environment. Overall, a discriminant function model was developed to predict four faunal assemblages from five simply-measured environmental variables (depth, sand content in sediment, temperature, salinity and pH in bottom water) with 100% accuracy, implying that benthic faunal assemablages are closed linked to certain combinations of abiotic factors.

• Economic and Environmental Geology
• /
• v.24 no.2
• /
• pp.131-150
• /
• 1991

The Weolseong diatreme was temporally and spatially related to the intrusion of the Gadaeri granite, and was -mineralized by meteoric aqueous fluids. In the Nokdong As-Zn deposit, pyrite, aresenopyrite and sphalerite are the most abundant sulfide minerals. They are associated with minor amount of magnetite, pyrrhotite, chalcopyrite and cassiterite, and trace amounts of Pb-Sb-Bi-Ag sulphosalts. The AsZn ore probably occurred at about $350^{\circ}C$ according to fluid inclusion and compositional data estimated from the arsenic content of arsenopyrite and iron content of sphalerite intergrown with pyrrhotite + chalcopyrite + cubanite. Heating studies of fluid inclusions in quartz indicate a temperature range between 180 and $360^{\circ}C$, and freezing data indicate a salinity range from 0.8 to 4.1 eq.wt % NaCl. The coexisting assemblage pyrite + pyrrhotite + arsenopyrite suggests that $H_2S$ was the dominate reduced sulfur species, and defines fluid parameter thus: $10^{-34.5}$ < ${\alpha}_{S_2}$ < $10^{-33}$, $10^{-11}$ < $f_{S_2}$ < $10^{-8}$, -2.4 < ${\alpha}_{S_2}$ < -1.6 atm and pH= 5.2 (sericte stable) at $300^{\circ}C$. The sulfur isotope values ranged from 1.8 to 5.5% and indicate that the sulfur in the sulfides is of magmatic in origin. The carbon isotope values range from -7.8 to -11.6%, and the oxygen isotope values from the carbonates in mineralized wall rock range from 2 to 11.4%. The oxygen isotope compositions of water coexisting with calcite require an input of meteoric water. The geochemical data indicate that the ore-forming fluid probably was generated by a variety of mechanisms, including deep circulation of meteoric water driven by magmatic heat, with possible input of magniatic water and ore component.

• Economic and Environmental Geology
• /
• v.51 no.4
• /
• pp.345-358
• /
• 2018

In this study, we have performed electron probe micro analyzer (EPMA), X-ray differaction (XRD), inductively coupled plasma spectroscopy (ICP), Fourier transform Raman spectroscopy (FT-Raman), far-infrared (FIR), nuclear magnetic resonance (NMR), and pH-DO Analyses for characterizing medicinal mineralogy aspect of the black tourmaline (Shantung, china), black and pink tourmaline (Minas Geraris, Brazil), black touemaline (Daeyu mine, Korea). In addition, heating effects of the tourmaline sauna as well as the effects of tourmaline powder-added soap on skin troubles have been investigated. It has been revealed that chemical composition of the tourmaline is either high in Fe-, Al-, B-rich types. Ratio of the K-Ca, Na-K, and Fe-B reflects the component change property of solid solution. $CaO/CaO+Na_2O$ and MgO/FeO+MgO ratio show high positive correlation. When tourmaline reacts with distilled water, extended reaction time DO values approximately decrease and it stabilizes at DO = 10. Otherwise, pH values increase until 6 hours and it stabilizes at pH = 8 after 24 hours. Distilled water changes to alkaline when it reacts with tourmaline powder and particles. Tourmaline showed lower absorption spectrum strength and transmittance at short wave, where absorption spectrum wavelength and strength were determined by the content of the composition elements and characteristics of crystallography. Increase of the Fe content has been confirmed to be the cause for the reduction of irradiation. For the chemical composition and spectral property of the tourmaline particle samples, it has been found that Si and Fe contents show positive correlation with Far-Infrared irradiation, while Al and Mg contents show negative correlation. For tourmaline powder, it has been confirmed that $^{17}O-NMR$ FWHM (full width at half maximum) decreases when reacts with distilled water. Tourmaline sauna (approximately $100^{\circ}C$) was found to increase $0.5-1.5^{\circ}C$ of body temperature, average of 12 heartbeat, and 10mg Hg of blood pressure. Tourmaline soap had very good aesthetic effect to skin and was confirmed to have above the average improvements to skin troubles (e.g., allergy or atopy).

• Korean Journal of Ecology and Environment
• /
• v.38 no.1 s.110
• /
• pp.54-62
• /
• 2005

The present study was to determine how seasonal rainfall intensity influences nutrient dynamics, ionic contents, oxygen demands, and suspended solids in a lotic ecosystem. Largest seasonal variabilities in most parameters occurred during the two months of July to August and these were closely associated with large spate of rainfall. Dissolved oxygen (DO) had an inverse function of water temperature (r = = = - 0.986, p<0.001). Minimum pH values of<6.5 were observed in the late August when rainfall peaked in the study site, indicating an ionic dilution of stream water by precipitation. Electrical conductivity (EC) was greater during summer than any other seasons, so the overall conductivity values had direct correlation (r = 0.527, p<0.01) with precipitation. Ionic dilution, however, was evident 4 ${\sim}$ 5 days later in short or 1 ${\sim}$ 2 weeks in long after the intense rain, indicating a time-lag phenomenon of conductivity. Daily COD values varied from 0.8 mg $L^{-1}$ to 7.9 mg $L^{-1}$ and their seasonal pattern was similar (r = 0.548, p<0.001) to that of BOD. Total nitrogen (TN) varied little compared to total phosphorus (TP) and was minimum in the base flow of March. In contrast, major input of TP occurred during the period of summer monsoon and this pattern was similar to suspended solids, implying that TP is closely associated (r = 0.890, p<0.01) with suspended inorganic solids. Mass ratios of TN : TP were determined by TP (r= -0.509, p<0.01) rather than TN (r= -0.209, p<0.01). The N : P ratios indicated that phosphorus was a potential primary limiting nutrient for the stream productivity. Overall data suggest that rainfall intensity was considered as a primary key component regulating water chemistry in the stream and maximum variation in water quality was attributed to the largest runoff spate during the summer monsoon.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.

• Journal of Life Science
• /
• v.27 no.10
• /
• pp.1111-1120
• /
• 2017

This study was conducted to select pepper lines that were tolerant to excessive water injury among the pepper germplasm and investigate the genetic characteristics of those lines to contribute to the breeding of pepper cultivars with stable productivity in abnormal weather. Each of the tolerant and susceptible lines went through immersion treatment, and differentially expressed genes between them were analyzed. The tolerant line showed increased expression of the CA02g26670 gene, which is involved in the CONSTANS protein pathway and regulation of flowering by day length, but it exhibited decreased expressions of CA01g21450, CA01g22480, CA01g34470, CA02g00370 and CA02g00380. The susceptible line showed increased gene expressions of CA02g09720, CA02g21290, CA03g16520, CA07g 02110, and CA12g17910, which are involved in the inhibition of proteolytic enzyme activity, DNA binding, inhibition of cell wall-degrading enzyme, and inhibition of nodulin, respectively. Meanwhile the expressions of CA02g02820, CA03g21390, CA06g17700 and CA07g18230 decreased in the susceptible line, in relation to calcium-ion binding, high temperature, synthesis of phosphocholine and cold stress, respectively. The expressions of genes related to apoptosis and peroxidase increased, while that of CA02g16990, which functions as a nucleoside transporter, decreased in both the tolerant and susceptible lines. Based on the different gene expressions between the tolerant and susceptible lines, further studies are needed on breeding abiotic stress-tolerant lines.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.203-215
• /
• 2006

Field observations on the spatio-temporal distribution of organic matter of the surface sediment were carried out at 15 stations in the central parts of the South Sea of Korea from April 2002 to January 2003. The range of water temperature and salinity in bottom waters, mud content and water content of surface sediment were $8.06{\sim}23.35^{\circ}C,\;29.20{\sim}34.51\;psu,\;71.2{\sim}99.9%$ and $38.7{\sim}68.9%$, respectively. Measured parameters on the surface sediments of ignition loss (IL), chemical oxygen demand (CODs), phaeopigment, particulate organic carbon (POC) and particulate organic nitrogen (PON) also ranged in $3.9{\sim}l2.5%,\;9.60{\sim}44.05\;mgO_2/g-dry,\;1.58{\sim}29.51\;{\mu}g/g-dry,\;3.12{\sim}13.01\;mgC/g-dry$ and $0.49{\sim}2.00\;mgN/g-dry$, respectively. The spatio-temporal distribution of organic matter demonstrated higher concentrations offshore than at lesions near the coastal line. Higher concentrations occurred in the summer and spring. The results indicated that the origin of organic matter in surface sediments in the central part of the South Sea was autochthonous rather than allocthonous because the organic matter had an average C/N ratio of 6.44 (${\pm}0.51$). However, the composition of autochthonous organic matter was mainly derived from detritus rather than living phytoplankton, which was Indicated by the results of the POC/phaeopigment ratio. A principal component analysis (PCA) indicated that 73.2% of the variability in the data was described by two factors: 1) an 'environmental factor concerning the accumulation of materials (57.3%)' and 2) 'origin of organic matter and the composition by primary production (15.9%)'. The sedimentary environment in the central part of the South Sea was divided into four regions from the factor score of the PCA by the concentrations of organic matter and the composition ratio of organic matters from phytoplankton in surface sediments.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.210-215
• /
• 2013

Litterfall production represents a major contribution of carbon and nutrient cycling in forest ecosystems. This study was carried out to determine the litterfall production in a broadleaved deciduous forest at the Mt. Keumsan Long Term Ecological Research (LTER) site, Southern Korea. Littefall was collected monthly or bimonthly from the site for 7 years from 2004 to2010. Leaf and reproductive (catkins) litters showed a seasonal variation, but litters of needle, branch, and barks were not changed across the seasons. Annual leaf litter of Quercus serrata and Carpinus laxiflora were significantly different (p<0.05) but that of C. cordata, Chamaecyparis obtusa, and Pinus thunbergii was not significantly changed for 7 years (p>0.05). Annual average litterfall production was 5,223 kg/ha, but annual variations were very large with minimum of 4,110 kg/ha/yr in 2004 and maximum of 6,002 kg/ha/yr in 2007. Total litterfall comprised of 2,323 kg/ha/yr in Q. serrata, 442 kg/ha/yr in C. laxiflora, 157 kg/ha/yr in C. cordata, 131 kg/ha/yr in Acer pseudosieboldianum, 390 kg/ha/yr in other deciduous tree species, 74 kg/ha/yr in P. thunbergii, 37 kg/ha/yr in C. obtusa, 672 kg/ha/yr in branches, 515 kg/ha/yr in miscellaneous, 448 kg/ha/yr in reproductive parts, and 54 kg/ha/yr in barks. respectively. The results indicate that litterfall production of the Mt. Keumsan LTER site was yearly fructurated with the positive linear relationship between leaf or total litterfall and annual mean temperature if no disturbance such as a typoon, and was lower than that of other Korean LTER sites.