• 한국경영과학회지
• /
• 제24권4호
• /
• pp.13-26
• /
• 1999

When we try to design a production planning system for a manufacturing company, it is a time consuming task to analyze various planning activities and identify inter-relationship among a lot of decisions made for the production planning. Most of the research efforts have been concentrated to well-organized independent decision-making problems that may usually be identified only after analyzing the characteristics of the decision-making process as a whole. In this paper, a methodology is suggested to characterize the whole process of the production planning for a manufacturing company and reduce the complexity of decision-making problems. The methodology is based on an experience of developing a production planning software for an automobile component manufacturer in korea. First, it is explained how to identify and represent the dependency among various decision-making variables. And a methodology is proposed to analyze the identified dependency among decision variables and identify decision-making process. Lastly, a practical example is provided to illustrate the analysis procedure in this paper.

• 한국압력기기공학회 논문집
• /
• 제5권1호
• /
• pp.25-31
• /
• 2009

Steam Generator(SG) tube is an important component of Nuclear Power Plant(NPP), which comprises of the pressure boundary of primary system. The integrity of SG tube has been confirmed by the eddy current test every outage. In Korea, Bobbin probe and MRPC probe have been generally used for the eddy current test. Meanwhile the usage of Array probe has gradually increased in U.S., Japan and other countries. In this study, we investigated the defect detection capability of the Array probe through its preliminary application to SG tube inspection. The Array probe has the equivalent capability in the defect detection and sizing as the conventional methods. Thus it is desirable that the Array probe is generally applied to SG tube inspection in the domestic NPPs.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1277-1282
• /
• 2009

The main objective of this prototype is to control resonance frequency of DTL system through the temperature control of cooling water. It is to resonant frequency of the drift tube cavities to 350 MHz. This paper describes the design of a prototype cooling water skid required for the temperature control of the DTL cavities, focusing in the modeling and simulation of the cooling system, the sizing of water pumping skid component.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.460-465
• /
• 2003

The modeling of PEM (Proton Exchange Membrane) fuel cell system consisting of fuel cell stack and BOP (Balance of Plant) is presented in this paper. The effects of temperature, pressure (air, hydrogen), and humidity on the fuel cell system performance were mainly investigated using thermo-dynamical and electro-chemical equations. To understand the power distribution characteristics of fuel cell system, the effects of operating temperature and air pressure on maximum power and system power were also demonstrated. Through this study, we can get the basic insight into the fuel cell stack and BOP component sizing and it can be used effectively for the optimization of the practical fuel cell systems in purpose.

• 대한안전경영과학회지
• /
• 제14권1호
• /
• pp.75-85
• /
• 2012

In this study, the representative hand shapes for the adult Koreans were analyzed by factor analysis and cluster analyses. The analyses were conducted on the anthropometric data of 58 hand dimensions from 325 subjects having nonhomogeneous demographics. Maximum hand circumference, first phalanx length of index finger, and ratio between the two measures were the independent variables for the cluster analyses. The results of the study showed that Korean hand shapes can be divided into 2 clusters irrespective of their size for each of the male and female group. There were slight differences in component ratio of hand shapes with respect to the occupation and the age, but their differences were not statistically significant. The representative Korean hand shapes and their anthrpometric dimensions could be used to design and establish proper sizing system for various hand operating devices.

• 에너지공학
• /
• 제12권2호
• /
• pp.84-92
• /
• 2003

구리밀봉 증기발생기의 열적크기 계산을 위한 1차원 열수력코드를 개발하였다. 고온 및 저온측 전열관사이의 구리의 열전도는 1차원으로 가정하고, 전열관 피치의 함수로 열저항을 구하였다 물/증기측 유동영역은 아냉, 포화핵비등, 포화막비등, 과열영역의 4 구간으로 구분하였다. 매개변수 연구를 위한 전열관 갯수는 250에서 3500이며, P/D비율은 각각1.4, 1.6, 1.8로 하였다. 계산결과, 전열관 갯수가 2500일 때 전열관 길이는 약 12 m, 직경은 약 3 m이다. P/D를 증가시키면 구리에 의한 열저항 성분이 증가하지만 전열관 길이는 큰 차이가 없음을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.33-38
• /
• 2016

The turbocharger is an essential component to realize the engine down-sizing. The moment of inertia of turbocharger rotor is an important parameter with respect to acceleration performance of the vehicle. It can be calculated from the CAD software based the geometry data and the material properties. But the accurate value of the inertia of turbocharger rotor must be measured through the experimental method. In this study, the measurement of moment of inertia of turbocharger rotor for 2.0 L spark-ignition engine was carried out. First, an experimental equipment using a trifilar method was designed and fabricated. Some optical devices, that is, photo sensor, counter, convex lens, etc, were used to increase the accuracy of the measurement. Second, error sensitivity for the equipment was analyzed. The error of period time and the radius can give big affects to the accuracy of the moment of inertia. When the amount of error of these two were each 1.0 %, maximum error of the moment of inertia was under 3.0 %. Third, the calibration for the equipment was performed using a calibration rotor which has similar shape to turbine rotor but simple. Calculated value from CAD software and measured one for the calibration rotor were compared. The total error of the equipment and the measurement is about 1.3 %. This result shows that the equipment can give the good result with resonable accuracy. Finally the moment of inertia of the turbine rotor and compressor wheel were measured. The coefficient of variations, the ratio of standard deviation to mean value, were reasonably small at 0.57 % and 0.73 % respectively. Therefore this equipment is suitable for the measurement of the moment of inertia of the turbine rotor and compressor wheel.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.73-82
• /
• 2011

Most of countries start to restrict the emission gases of vehicles especially CO2 because of the global warming. Many vehicle companies including Toyota have launched various HEVs to satisfy the restriction laws and to improve the vehicle's efficiency. However, development for heavy-duty hybrid system is not plentiful rather than the passenger car. In this study, we choose the optimal size of engine, motor and battery for heavy-duty hybrid systems using dynamic programming. Also we analyze the correlation of the system's cost and efficiency because the added cost of vehicle to make the hybrid system is very important factor for the manufacturing companies. Finally, this study suggests a method to choose the appropriate system components size considering its performance and the cost. With this method, it is possible to select the component size for various systems.

• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1603-1611
• /
• 2010

본 논문에서는 범프 및 브레이크 하중조건 하에서 자동차 넉클의 강도설계에 관한 다양한 회귀모델 기반 근사최적화 기법 및 그 성능을 비교하고자 한다. 최적설계문제는 응력, 변형 및 진동주파수의 제한조건 하에서 중량을 최소화하여 설계변수인 단면치수가 결정되도록 정식화 된다. 비교 연구를 위해 사용된 근사화 기법은 순차적 근사최적화(SAO), 순차적 이점대각이차 근사최적화(STDQAO), 그리고 개선된 이동최소 자승법(MLSM) 기반 근사최적화 기법인 CF-MLSM 와 Post-MLSM 이다. SAO 와 STDQAO 적용을 위하여 상용 프로세스통합 설계최적화(PIDO) 코드를 사용하였다. 본 연구에 적용한 MLSM 기반 근사최적화 기법들은 제한조건의 가용성을 보장할 수 있도록 새롭게 개발되었다. 다양한 근사최적화 기법에 의한 설계결과는 설계 해의 개선 및 수렴속도 등 수치적 성능을 기준으로 실제 비근사최적화 결과와 비교검토 되었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.173-176
• /
• 2007

The characteristics of the tool system give many effects into the costs and qualities for the finished components. This study proposes a new method for manufacturing of high manufacturing productivity, production process reduction and low cost through back pressure forming. The Lock-up hub is manufactured through many processes, such as upsetting($1^{st}$ Forming), piercing, direct extrusion($2^{nd}$ Forming), final sizing process($3^{rd}$ Forming). In this study, process design for closed-die forging of a Lock-up hub used for a component of automobile transmission was made using three-dimensional finite element simulations, and the strain distributions and velocity distributions are investigated through the post processor. The rigid-plastic finite-element method for back pressure forging has been used in order to reduce development time and die cost. Using the FEM simulation, we found the optimum value of back pressure. The prototypes of Lock-up hub parts were forged into the net-shape. In the experiment, lead precision of tooth are measured by the CCMM(Contact Coordinate Measuring Machine). The dimensional accuracy of forged part was improved up to the 40% when back press was applied.