• Bulletin of the Society of Naval Architects of Korea
• /
• v.22 no.2
• /
• pp.35-48
• /
• 1985

The present work develops a method of evaluating thrust deduction and wake for different loads of the propeller using the concerted application of the theoretical tools and experimental techniques. It also shows the applicability of the new method to the design of optimum hull form. Firstly, the problem of hull-propeller interaction was analyzed in terms of inviscid as well as viscous components of the thrust deduction and wake. The wavemaking resistance of a hull and propeller were mathematically represented by sources on the hull surface and sink on the propeller plane, respectively. The strength of sink was determined by utilizing the radial distributions of propeller load and nominal wake. The resistance increment due to a propeller and the axial perturbation flow induced by the hull in the propeller plane were calculated. Especially, the inviscid component of the thrust deduction was calculated by subtraction the wavemaking resistance of a bare hull, the wavemaking resistance of a free-running propeller and the augmentation of propeller resistance due to hull action from the wavemaking resistance of the hull with a propeller. The viscous components of the thrust deduction and wake were estimated as functions of propeller load which were established by the propeller load varying test after deduction the calculated inviscid components. Secondly, an analysis method of powering performance was developed based on the potential theory and the propeller load varying test. The hybrid method estimates the thrust deduction, wake and propeller open-water efficiency for different propeller load. This method can be utilized in the analysis of powering performance for the propeller load variation such as the added resistance due to hull surface roughness, the added resistance due to wind, etc. Finally, the hybrid method was applied to the optimum design of hull form. A series of afterbody shapes was obtained by systematically varying the waterplane and section shapes of a parent afterbody without changing the principal dimensions, block coefficient and prismatic coefficient. From the comparison of the predicted results such as wavemaking resistance, thrust deduction, wake and delivered power, an optimum hull form was obtained. The delivered power of the optimized hull form was reduced by 5.7% which was confirmed by model tests. Also the predicted delivered power by the hybrid method shows fairly good agreement with the test result. It is therefore considered that the new analysis method of powering performance can be utilized as a practical tool for the design of optimum hull form as for the analysis of powering performance for the propeller load variation in the preliminary design stage.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.4
• /
• pp.1-10
• /
• 2011

This study investigates the performance of composite (steel-concrete) frame structures through numerical experiments on individual connections. The innovative aspects of this research are in the use of connections between steel beams and concrete-filled tube (CFT)columns that utilize a combination of low-carbon steel and shape memory alloy (SMA) components. In these new connections, the intent is to utilize the recentering provided by super-elastic shape memory alloy tension bars to reduce building damage and residual drift after a major earthquake. The low-carbon steel components provide excellent energy dissipation. The analysis and design of these structures is complicated because the connections cannot be modeled as being simply pins or full fixity ones they are partial restraint (PR). A refined finite element (FE) model with sophisticated three dimensional (3D) solid elements was developed to conduct numerical experiments on PR-CFT joints to obtain the global behavior of the connection. Based on behavioral information obtained from these FE tests, simplified connection models were formulated by using joint elements with spring components. The behavior of entire frames under cyclic loads was conducted and compared with the monotonic behavior obtained from the 3D FE simulations. Good agreement was found between the simple and sophisticated models, verifying the robustness of the approach.

• Journal of Korea Water Resources Association
• /
• v.53 no.5
• /
• pp.323-336
• /
• 2020

Owing to climate change, the annual precipitation in Korea has increased since the 20th century, and it is projected to continue increasing in the future. This trend of increasing precipitation will raise the possibility of floods; hence, it is necessary to establish national adaptation plans for floods, based on a reasonable flood risk assessment. Therefore, this study focuses on developing a framework that can assess the flood risk across the country, as well as computing the flood risk index (FRI). The framework, which is based on IPCC AR5, is established as a combination of three indicators: hazard, exposure, and capacity. A data-based approach was used, and the weights of each component were assigned to improve the validity of the FRI. A Spearman correlation analysis between the FRI and flood damage verified that the index was capable of assessing potential flood damage. When predicting scenarios for future assessment using the HadGEM3-RA based on RCP 4.5 and 8.5, the flood risk tends to be lower in the early and mid-21st century, and it becomes higher at the end of the 21st century as compared with the present.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.4
• /
• pp.271-281
• /
• 2004

Adenoid cystic carcinoma is malignant tumor in salivary gland, and its behavior is very invasive. Of all malignant tumor adenoid cystic carcinoma is occured in frequency of 4.4% in major salivary gland, and 1.29% in minor salivary gland. Histopathologically, adenoid cystic carcinoma is characterized by a cribriform appearance, and tubular form and solid nest type tumor can be seen. The tumor cell structure composed of modified myoepithelial cell, and basaloid cell. Extracellular matrix of this tumor cell contains variable ground substance with basement membrane component. Basement membrane matrix composed of collagen fibers, glycoproteins, proteoglycans, and its function is well known that it participate in differentiation, proliferation, and growth of tumor cell. Basement membrane molecule is essential for invasion of peripheral nerve, blood vessel, skeletal muscle in tumor cell of adenoid cystic carcinoma. In many studies, the tumor cell of adenoid cystic carcinoma containing modified myoepithelial cell participate in synthesis of proteoglycan. In this study, tissue sample of adenoid cystic carcinoma of human salivary gland were obtained from 15 surgical specimen, and all specimen were routinely fixed in 10% formalin and embedded. Serial $4-{\mu}m$ thick sections were cut from paraffin blocks. the histopathologic evaluation was done with light microscopy. And, the immunohistochemical staining, characteristics of glycosaminoglycan were observed. For biochemical analysis of glycosaminoglycan, isolation of crude glycosaminoglycan from tumor tissue and Western bolt analysis were carried out. With transmission electomicroscopy, tumor cell were observed. Biologic behavior of adenoid cystic carcinoma was observed with distribution and expression of basement membrane of glycosaminoglycan in tumor cells, The results obtained were as follows: 1. In immunohistochemical study, chondroitin sulfate is postively stained in tumor cell and interstitial space, dermatan sulfate is weakly stained in ductal cell. But keratan sulfate is negatively stained. 2. In immunohistochemical study, heparan sulfate is strong positive stained in tumor cell and basement membrane, especially in invasion area to peripheral nerve tissue. 3. In transmission electromicroscpic view, the tumor cells are composed modifed myoepithelial cells, and contains many microvilli and rough endoplasmic reticulum. 4. In Western blot analysis, the expression of glycosaminoglycan is expressed mostly in heparan sulfate. From the results obtained in this study, tumor cell of adenoid cystic carcinoma is composed modified myoepithelial cell, and glycosaminoglycan of basement membrane molecule of heparan sulfate and chondroitin sulfate mostly participate in the development and invasiveness of adenoid cystic carcinoma by immunohistochemical study and western blot analysis.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.18 no.2
• /
• pp.123-129
• /
• 2007

Objectives: Autism is a complex neurodevelopmental spectrum disorder with a strong genetic component. Previous neurochemical and genetic studies have suggested the possible involvement of the serotonin system in autism. Tryptophan 2,3-dioxygenase(TDO2) is the rate-limiting enzyme in the catabolism of tryptophan, which is the precursor of serotonin synthesis. The aim of this study was to investigate the association between the TDO2 gene and autism spectrum disorders(ASD) in a Korean population. Methods: The patients were diagnosed with ASD on the basis of the DSM-IV diagnostic classification outlined in the Korean version of the Autism Diagnostic Interview-Revised and Autism Diagnostic Observation Schedule. The present study included the detection of four single nucleotide polymorphisms(SNPs) in the TDO2 gene(rs2292536, rs6856558, rs6830072, rs6830800) and the family-based association analysis of the single nucleotide polymorphisms in Korean ASD trios using a transmission disequilibrium test(TDT) and haplotype analysis. The family trios of 136 probands were included in analysis. 87.5% were male and 86.0% were diagnosed with autism. The mean age of the probands was $78.5{\pm}35.8$ months(range: 26-264 months). Results: Two SNPs showed no polymorphism, and there was no significant difference in transmission in the other two SNPs. We also could not find any significant transmission in the haplotype analysis(p>.05). Conclusion: We could not find any significant statistical association between the transmission of SNPs in the TDO2 gene and ASD in a Korean population. This result may not support the possible involvement of the TDO2 gene in the development of ASD, and further exploration might be needed to investigate other plausible SNP sites.

• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.83-90
• /
• 1997

Aiming at the treatment of large volumes of gas with a low concentration of poorly water soluble VOC(Volatile Organic Compound), a new system is proposed: the combination absorption tower/bioreactor. In the scrubber part of the bioscrubbing system, the contaminating compounds are absorbed in a aqueous phase. The contaminated scrubbing liquid is transported to the bioreactor, where the compounds are biodegraded by aerobic microorganisms (mainly to carbon dioxide, water, and biomass). In this study, separation of a volatile organic compound(VOC) out of a waste gas stream has been carried out using a re-cyclable high boiling point extrant(HBE). The liquid stream containing a high boiling point entrant(HBE) scrubs the gas stream in a direct gas-liquid countercurrent contacting operation in a packed tower for the removal of said component from the gaseous stream. A packed-bed column using Pall Ring was set up in order to simulate practical conditions for the scrubbing tower. The liquid stream transported to the bioreactor is recovered and recycled to the scrubber. The model gas, which contained 400 mg/$\textrm{m}^3$ of toluene, at a rate of 100 L/min, flowed into the packed column where the scrubbing liquid trickled over the packing in countercurrent to the rising gas at 10~15L/min. The bioscrubber designed for large volume air streams containing VOCs showed removal efficiency up to 80% in an optimum operating conditions during the tests fer removing toluene from an air stream by scrubbing the air stream with HBE.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.421-432
• /
• 2020

This paper proposes a 2-kW solid-state power amplifier (SSPA) developed by employing power amplifier pallets designed using gallium-nitride high electron mobility transistors, which is used in S-band military radars and to replace existing traveling-wave tube amplifier (TWTA). The SSPA consists of a high-power amplifier module, which combines eight power amplifier pallets, a drive amplifier module, a digital control module, and a power supply unit. First, the amplifier module and component were integrated into a small package to account for space limitations; next, an on-board harmonic filter was fabricated to reject spurious components; and finally, an auto gain control system was designed for various duty ratios because recent military radar systems are all active phase radars using the pulse operation mode. The developed SSPA exhibited a max gain of 48 dB and an output power ranging between 63-63.6 dBm at a frequency band of 3.1 to 3.5 GHz. The auto gain control function showed that the output power is regulated around 63 dBm despite the fluctuation of the input power from 15-20 dBm. Finally, reliability of the developed system was verified through a temperature environment test for nine hours at high (55 ℃) / low (-40℃) temperature profile in accordance with military standard 810. The developed SSPA show better performance such as light weight, high output, high gain, various safety function, low repair cost and short repair time than existing TWTA.

• Journal of The Korean Association For Science Education
• /
• v.32 no.5
• /
• pp.1007-1026
• /
• 2012

The purpose of this study was to develop analytic framework for dialogic argumentation to show the context and flow visualizing interactions of argumentation, to be able to present quality of argumentation specifically. For this, we formulated a method of the argumentation diagram using feature of diagram simple and structurally visualizing interrelation between argument components, and then quantified quality of argumentation to argument level score on this basis. We have developed the learning material for argumentation about a vertical circular motion and used the obtained translations from applying it in developing the framework. We chose argument statements among full transcript and then coded as Toulmin's argument components, and these codes was effectively arranged and linked to show argumentation diagram. Results by argumentation diagram could be useful understanding of interactive argumentation context and the flow and present frequency, the combination of argument elements, rough qualitative level of argumentation. To quantify argumentation quality, we gave different scores to different link lines reflecting indication of argumentation quality like that diversity of argument component, justification, presence or absence of rebuttals. The process of identification of argument level is very simple, qualitative level of argumentation represented as concrete score could present various and concrete argument level. Developed analytic framework might contribute to argumentation research field, because it can present effectively dialogic argumentation result. Also, various analysis cases might guide designing an effective argumentation practice and circular motion learning.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.175-181
• /
• 2019

For the purpose of Application to the small radar sensor, the MMIC Chip, which is the core component of the W-band, was designed in Korea according to the characteristics of the transceiver and manufactured by 0.1㎛ GaAs pHEMT process, and compared with the MMIC chip purchased overseas. The noise figure of low noise amplifier, insertion loss of the switch and image rejection performance of the down-converted mixer MMIC chip showed better characteristics than those of commercial chips. The MMIC chip developed in domestic was applied to the transmitter and receiver through W-band waveguide low loss transition structure design and impedance matching to verify the performance after the fabrication is 9.17 dB, which is close to the analysis result. As a result, it is judged that the transceiver can be applied to the small radar sensor better than the MMIC chip purchased overseas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.4
• /
• pp.362-369
• /
• 2014

A railway SCADA system is a control systems that provide the trains with the electricity. A railway SCADA system sends commands to the RTUs(remote terminal unit) and then it gathers status information of the field devices in the RTUs or controls field devices connected with the RTUs. The RTU can controls input output modules directly, gathers the status information of the field devices connected with it, and send the information to the control center. In this way, a railway SCADA system monitors and controls the electricity power for running trains. The cyber attackers may use some vulnerabilities in the railway SCADA system software to attack critical infrastructures. The vulnerabilities might be created in the railway software development process. Therefore it need to detect and remove the vulnerabilities in the control system. In this paper we propose a new control protocol fuzzing method to detect the vulnerabilities in the DNP3 protocol based application running on VxWorks in RTU(Remote Terminal Unit) that is a component of the centralized traffic control system for railway. Debug-channel based fuzzing method is required to obtain process status information from the VxWorks.