• 헤리티지:역사와 과학
• /
• 제56권3호
• /
• pp.138-156
• /
• 2023

우리나라 문화유산에서 상당한 비중을 이루는 금속문화재 중 일부는 고유 기능과 역할, 규모 등으로 인해 야외에 설치·전시되고 있다. 그렇기에 안정적 환경에서보다 다양하고 복합적인 훼손이 발생할 수 있다. 따라서 야외 설치 문화유산의 보존상태 진단을 위한 조사뿐만 아니라 조사 결과로 확보한 기초 자료를 장기적이고 지속적인 보존관리의 데이터로 활용하기 위해서는 정확한 진단과 체계화된 조사법을 접목할 필요가 있다. 제작 당시부터 야외에 설치·전시된 국보 창경궁 자격루 누기는 지속적인 보존관리에도 손상이 발생하여, 전면적인 보존처리에 앞서 보존상태 진단을 위한 과학적인 조사를 실시하였다. 먼저 조사 목적에 따라 제원 및 육안조사, 과거 보수이력 조사를 통해 보존상태를 조사하였다. 그리고 3D 스캔과 표면 문양 조사, 색차 분석을 통한 정밀조사와 P-XRF, FT-IR, Py-GC/MS 분석으로 재질과 오염물을 분석하였다. 과학적 조사 결과에 대한 검토를 통해 과거 보존처리 과정에서 사용된 스쿠알란(squalane)과 실리콘 오일(silicone oil)이 야외 환경 요인에 직접적으로 노출되어 손상이 발생하였으며, 그 위에 먼지 등의 이물질이 두텁게 고착되어 오염이 심화된 것으로 확인되었다. 상대적으로 노출 영향이 높은 부분을 중심으로 손상의 발생 정도가 큰 것이 확인되었으며, 이는 색차 데이터를 그룹화(grouping)하여 파악한 경향성과 일치하였다. 이처럼 보존상태를 진단하고 기초자료를 확보하는데 다양한 조사법을 접목한 결과 발생한 손상 원인과 양상을 파악할 수 있었다. 또한 조사에서는 다양하게 활용 가능한 디지털 데이터의 확보 과정과 가시적으로 확인되는 손상을 과학적 데이터로 제시하고 손상 양상 등의 경향성을 파악할 수 있는 색차 분석이 효과적인 것으로 확인되었다.

• 대한영상의학회지
• /
• 제82권5호
• /
• pp.1258-1273
• /
• 2021

목적 풍선-스텐트 테크닉(balloon-stent technique; 이하 BST)은 복잡한 동맥류를 치료하는 보조술로서 그 고유한 장점을 가지고 있다. 저자들의 기관에서 Atlas의 출시 이래 Scepter-Atlas 조합의 BST를 치료에 적용해 온 경험을 공유하고자 한다. 대상과 방법 초기에 Atlas를 Scepter 카테터에 진입시키지 못하는 기술적 실패를 겪은 뒤 이를 해결하기 위해 문제가 되었던 기구들을 면밀히 관찰하였다. 2018년 3월부터 2019년 12월까지 총 57개의 비파열성 원위내경동맥 동맥류에 대해 코일 색전술을 시행하였고, 이중 25개(23명)의 증례는 BST로 치료하였다. 포함된 증례들의 영상 및 임상 정보는 후향적으로 수집하고 분석하였다. 결과 이 논문에서 소개하는 간단한 팁을 알게 된 이후 Scepter-Atlas 조합의 기술적 성공률은 50%에서 100%로 상승하였다. BST로 치료한 환자군에서 시술 직후에 84%, 추적검사에서 95.8%가 완전하거나 거의 완전한 폐색을 보였고 stent-assisted coil 그룹에서는 각각 96.3%, 88.4%가 시술 직후와 추적검사에서 같은 결과를 보였다. 소수의 환자에서 합병증을 보였지만 임상적으로 문제가 된 증례는 없었다. 결론 Scepter-Atlas 조합을 이용한 BST는 원위내경동맥에 위치한 비파열성 동맥류를 치료하는 데 효과적이고 안전한 방법이 될 수 있다. Scepter는 Atlas를 매개하는 카테터로 충분히 사용될 수 있다.

• 자원환경지질
• /
• 제8권2호
• /
• pp.73-87
• /
• 1975

한국(韓國)의 대단위지층(大單位地層)들은 "계(系)" 혹은 "층군(層群)"으로 불리워 왔으나 광역부정합(廣域不整合)을 그 상하면(上下面)으로 하는 것이 가장 기본적(基本的)인 특징(特徵)이므로 SYNTHEM간계(間系)이란 단위명(單位名)이 적당(適當)하다. 한반도(韓半島)는 그 면적(面積)의 대부분(大部分)이 준강괴적(準剛塊的) 성격(性格)을 띄고 있는데 그러한 지역(地域)에 발달(發達)된 지층(地層)을 대부정합(大不整合)에 기준(基準)하여 분류(分類)하면 상원(詳原), 조선(朝鮮), 평안(平安), 대동(大同) 및 경상(慶尙)의 제간계(諸間系)들이 인정(認定)된다. 이들 사이의 부정합(不整合)들은 조산운동(造山運動)에 기곤(基困)한 것과 조륙운동(造陸運動) (및 수직조구조(垂直造構造))에 기곤(基困)한 것으로 나눌 수 있다. 상원간계(詳原間系)와 선상원기반누층(先詳原基盤累層)(basement complex)과의 경계(境界)는 확연(確然)한 무정합(無整合)(noncomformity)이다. 상원(詳原), 조선(朝鮮), 및 평안(平安) 간계(間系)들 사이의 부정합(不整合)은 선(先)캠브리아 영대후기(永代後期) 및 고생대(古生代) 동안 이들이 분포(分布)하는 지각부분(地殼部分)이 안정(安定)을 유지하였음을 표상(表象)하는 비정합(非整合)(disconformity)들이다. 평안(平安), 대동(大同), 및 경상간계(慶尙間系)들 사이의 부정합(不整合)은 중생대조산운동(中生代造山運動)들을 대표(代表)하는 경사부정합(傾斜不整合)들이다. 경상간계(慶尙間系) 상하(上下)의 부정합(不整合)들은 곳에 따라 (주라기(紀) 중기(中期)내지 후기(後期) 및 백악기(白堊紀) 말기(末期)의 화강암(花崗岩)들 위의) 무정합(無整合)이다. 연천(漣川) 및 마천령(摩天嶺) 누층군(累層群)들은 화강암질암(花崗岩質岩)을 사이에 두고 서로 떨어져 있어 상호(相互) 관계(關係)가 직접(直接)으로 표시(表示)되어 있는 곳은 없으나, 그 변형변성(變形變成)의 정도(程度)와 암질(岩質)이 현저한 차이(差異)를 나타냄에 비추어 서로 시대(時代)를 달리할 가능성(可能性)이 크다는 생각은 오래 전 부터 있었다. 남한(南韓)의 편마암류(片麻岩類)에 대한 가장 확실성(確實性)있는 방사능(放射能) 연령측정치(年齡測定値)가 20억년전(億年前) 내외(內外)라는 근래(近來)의 자료(資料)는 연천누층군(漣川累層群)을 포함(包含)하는 한반도(韓半島)의 최고기(最古期) 기반누층(基盤累層)을 가장 광역적(廣域的)으로 변성(變成) 화강암화(花崗岩化) 시킨 시기(時期)가 바로 그 때임을 의미(意味)하는 것으로 생각된다. 이에 반(反)하여 마천령누층군(摩天嶺累層群) 발달말기(發達末期) 또는 직후(直後)에 관입(貫入)한 것으로 생각되는 이원화성암군(利原火成岩群)의 방사능(放射能) 연령치(年齡値)는 10수억년전(數億年前)으로 측정(測定)되어 있다. 이러한 절대연령자료(絶對年齡資料)들은 연천누층군(漣川累層群)이 마천령누층군(摩天嶺累層群)보다 고기(古期)라는 견해(見解)를 뒷받침한다. 마천령누층군(摩天嶺累層群)의 대비층(對比層)이 남한(南韓)에서는 발견(發見)되지 않는 사실(事實)은 상원간계(詳原間系) 또한 남한(南韓)에서 발견(發見)되지 않는다는 사실(事實)과 더불어 주목(注目)을 요(要)한다. 상원간계(詳原間系)의 사당우층군(祠堂隅層群)과 구현층군(駒峴層群) 사이에 있는 평행부정합(平行不整合)은 상원간계(詳原間系)와 조선간계(朝鮮間系) 사이에 있는 평행부정합(平行不整合) 못지않게 큰 것이나, 후자(後者)는 선(先)캠브리아 영대층(永代層)과 현생영대층(顯生永代層)을 갈라놓는 중요(重要)한 구실때문에 중요시(重要視)되어 왔다. 상원간계(詳原間系)는 중국(中國)의 광의(廣意)의 진단계(震旦系)(Sinan)에 대비(對比)된다. 표식진단계(標式震旦系)의 기저(基底)의 연령(年齡)은 13억년전(億年前)으로 측정(測定)되어 있다. 중국(中國) 북부(北部)와 북한(北韓)에 있어서 상원간계(詳原間系)와 조선간계(朝鮮間系)는 그 분포(分布)가 흔히 병행하고 구조적(構造的)으로 흡사하며 암질(岩質)에도 공통점(共通點)이 많아 하나의 대단위지층(大單位地層)("낙랑계(樂浪系)")으로 간주된 일까지 있다. 조선간계(朝鮮間系) 기저(基底)에서 화석(化石)이 산출(産出)된 곳으로는 북한(北韓)의 문산리(文山里) 부근(附近)이 있는데 이곳에서는 캠브리아기(紀) 초기중(初期中) 비교적초기(比較的初期)의 것으로 인정(認定)되는 화석군(化石群)이 산출(産出)되었다. 조선간계(朝鮮間系)의 층서(層序)가 비교적(比較的) 잘 연구(硏究)된 곳은 강원도(江原道) 대기(大基)-동점(銅店) 지방(地方)인데 이곳의 최상위층(最上位層)인 직운산층(織雲山層) 및 두위봉층(斗圍峰層)에서는 유럽의 Llandeilian 계(階) 및 Caradocian 계(階)와의 공통속(共通屬)으로는 인정(認定)된 화석(化石)들이 산출(産出)되었다. Llandeilian과 Caradocian의 경계(境界)를 가지고 오르드뷔스기(紀)의 중부(中部)와 상부(上部)의 경계(境界)를 삼 관례(慣例)에 따르면 조선간계(朝鮮間系)는 그 시대(時代)가 캠브리아기(紀)와 오르드뷔스기(紀) 중기(中期)(후기(後期)의 전기(前期)에까지?) 걸친다고 보게된다. 조선간계(朝鮮間系)가 여러번의 해침(海浸)과 해퇴(海退)를 반영(反影)하고 있음에 반(反)하여 평안간계(平安間系)는 하나의 큰 해퇴형단면(海退形斷面)을 이룬다. 조선간계(朝鮮間系)의 암질지층단위(岩質地層單位)들이 국지적(局地的)임에 반(反)하여 평안간계(平安間系)의 홍점(紅店), 사동(寺洞), 고방산(高坊山), 및 녹암(綠岩)의 제층(諸層)들은 널리 인정(認定)되며 시간지층단위(時間地層單位)로도 사용(使用)이 가능(可能)하다. 홍점층(紅店層) 혹은 홍점통(紅店統)은 해서화석(海棲化石)을 다산(多産)하는데 이들은 본층(本層)의 퇴적(堆積)이 석탄기(石炭紀) Moscovian 계(階) 초(初)에 시작(始作)되었음을 가리킨다. 녹암통(綠岩統) 혹은 태자원통(太子院統)은 화석(化石)이 극(極)히 희귀(希貴)하여 시대결정(時代決定)이 어려우나, 중국남부(中國南部)에 있어서는 그 대비층(對比層)에 해성층(海成層)이 협제되어 있고 페름기(紀) 후기(後期)의 표준화석(標準化石)들이 산출(産出)되었다. 평안간계(平安間系)가 삼첩계(三疊系)의 일부(一部)를 포함(包含)한다는 증거는 발견(發見)되지 않는다. 선(先)캠브리아후기(後期)와 고생대(古生代) 동안 한반도(韓半島)와 중국북부(中國北部)에는 조산운동(造山運動)이 없었으나 중생대(中生代)에는 이곳에 여러번의 변동기(變動期)가 있었고 한반도(韓半島)에는 두번의 절정기(絶頂期)가 있었다. 평안간계(平安間系)는 삼첩기(三疊紀) 전반기간(前半期間)에 있은 송임조산운동(松林造山運動)으로 곤(困)하여 습곡(褶曲)되었으며 반도북동부(半島北東部)에는 조산운동(造山運動)에 수반된 화강암(花崗岩) 관입(貫入)이 있었다. 그 방사능(放射能) 연령치(年齡値)는 2억(億)2천만년(千萬年) 내지 1억(億)8천만년(千萬年) 전(前)이나 측정치(測定値)의 대다수(大多數)는 삼첩기(三疊紀) 전반기(前半期)에 집중(集中)된다. 송임운동(松林運動)은 남한(南韓)보다 북한(北韓)에서 격렬하였으나 주라기(紀)의 대보조산운동(大寶造山運動)은 북한(北韓)보다 남한(南韓)에서 위세(偉勢)를 떨쳤던 것으로 나타난다. 대보운동(大寶運動)에 수반된 화강암(花崗岩)의 방사능연령치(放射能年齡値)는 1억(億)7천만년(千萬年) 내지 1억(億)5천만년전(千萬年前)(주라기중기(紀中期) 내지 후기(後期)의 초기(初期))이다. 대동간계(大同間系)는 송임운동이후(松林運動以後) 대보운동이전(大寶運動以前) 기간중(期間中)에 퇴적(堆積)된 지층(地層)이다. 대보운동(大寶運動) 이후(以後) 백악기(白堊紀) 동안에 걸쳐 경상간계(慶尙間系)가 퇴적(堆積)되었다. 한반도(韓半島)에 있어서 페름계(系)와 중생대층(中生代層)은 옥천류동대(沃川流動帶)의 지층(地層)을 제외(除外)하고는 모두가 육성층(陸成層)이다. 경상간계(慶尙間系)의 퇴적후기(堆積後期)에는 퇴적분지(堆積盆地)에 대규모의 화산암분출(火山岩噴出)이 있었고 이어 (백악기말(白堊紀末)에는) 대규모의 화강암(花崗岩) 관입(貫入)이 있었다. 이어 (신생대초(新生代初)에는) 퇴적분지(堆積盆地)의 소멸(消滅)을 가져온 지반(地盤)의 육기운동(陸起運動)이 일어났는데 동해(東海)와 황해(黃海)의 심강운동(沈降運動), 따라서 반도(半島)의 형성(形成)은, 이와 동시(同時)이거나 후속(後續)한 현상(現象)일 것이다. 중신세층(中新世層)이 동해안(東海岸)을 따라 분포(分布)함을 보아 중신세말(中新世末)에 반도(半島)의 경동운동(傾動運動)과 동시(同時)에 동해(東海)의 가속적(加速的) 심강(沈降)이 있었던 것으로 생각된다.

• 한국유통학회:학술대회논문집
• /
• 한국유통학회 2005년도 춘계학술대회 발표논문집
• /
• pp.383-405
• /
• 2005

재래시장은 지역의 중심지적인 특성과 문화적인 특성이 고스란히 반영된 지역 거점지이며 인근 지역주민의 상거래라는 1차적 장소적 기능과 사회문화적 측면의 상호 정보문화교류, 커뮤니티 공간 형성으로 유통의 집객시설과 집적시설로서 중요한 역할과 기능을 하고 있다. 5인 이하 가족 단위의 생계형으로 취급상품, 구입방범, 판매방식 등이 전근대적인 경영기법을 통해 한국의 대표적 소매업태로서의 역할을 해오고 있다. 1990년대 이후 신유통업태와 대형할인점 진출로 인해 재래시장은 급격한 경쟁력 상실과 소비자들의 생활수준의 향상, 구매패턴의 변화, 인터넷의 급속한 확산 등 외부적인 유통 환경변화에서 경쟁력을 상실하고 설 자리를 잃어가고 있다. 정부의 지역경제 활성화와 국민경제의 발전 측면에서 고령화된 재래시장에 대한 대책 중 정부의 예산지원 정책으로 환경개선사업, 연구용역, 경영현대화중심의 국고지원 사업은 2001년부터 2004년까지 총 3,853억원의 국고가 지원되었으나 활성화 사업의 실효성에는 아직 정확히 나타나고 있지 않은 상황으로 조사되었다. 또한 지원사업을 추진함에 있어 시장상인리더들의 전문성결여로 종합적인 추진전략과 중장기적 계획수립 및 자발적인 상인들의 합의점 유도 반감으로 지속적인 사업추진방향에 한계점을 나타냈다. 재래시장이 단순히 물건을 사고파는 물리적인 장소적 의미에서 벗어나 새로운 지역 장소적 생활공간으로 커뮤니티적 접근을 통한 장소적 창조전략이 필요하다. 이에 시대적 패러다임 변화에 따른 새로운 사업 방향 전환을 통해 재래시장의 장소적 기능 도입을 동해 문화적 경제적 의미를 지닌 공간으로 재조명을 동해 발전방향을 제시하고자 한다. 재래시장은 지역 기반으로 한 지역생활자들과 자연스럽게 커뮤니티를 상호 형성하고 정보와 지식 공유를 통해 부 창출 공간으로 재생되어야 할 것이다 재래시장이 부 창출 공간으로 재생하려면 시대적 장소적 환경에 맞는 시설과 교류활동을 통찬 상호신뢰구축 활동 속에서 고객이 원하는 방향으로 영업환경도 변화하여야 하며, 지역단위 중심 영국의 TCM, 미국의 BID, 일본의 TMO 등 해외 벤치마킹을 통한 단위 시장상가 점포단위의 점(點)정책에서 선(線)단위의 상가로 환경사업과 거시적인 지역단위중심인 면(面) 정책적 접근을 통한 커뮤니티적인 발상 전환이 필요하다. 국내외 사례비교 분석을 통해 사회적 정책수요 발굴과 기존의 추진방법에 대한 선진사례 연구를 통한 NPO, NGO 등의 시민기업가와 이를 수행키 위한 혁신성과 전문성조정능력을 갖춘 리더자 양성이 무엇보다 중요하다. 특히 지역자원 활용 소스 중심의 문화관린 산업의 seeds 발굴과 향토상품의 상품화와 네트워크 조직망 구축을 위한 지역중심의 복합 생활문화 공간이 필요할 것이며, 이를 촉진키 위한 mentor academy시스템 접근을 통해 점점 고령화되어 가고 있는 재래시장에 대해 차별적 특성이 반영된 종합적이고 체계적 접근 방법연구가 필요하다.

• Journal of Chest Surgery
• /
• 제31권5호
• /
• pp.472-480
• /
• 1998

서울대학교 어린이병원 흉부외과에서는 1990년부터 1996년까지 104례의 기능적 단심실을 가진 선천성심기형 환아에 대하여 심장내 외측통로술을 이용한 완전폰탄술을 시행하였다. 환아의 연령 및 체중분포는 각각 평균 35.9(범위 10-72) 개월, 12.8 (범위 6.5-37.8) kg이었다. 술전진단은 삼첨판폐쇄증(18), 단심실연결을보이는 중복개구심실(53) 및 기타 기능적 단심실을 동반한 복잡심기형(33)이었다, 50례의 환아에 대하여 체폐동맥 단락술 (37), 폐동맥밴딩(13), 외과적 심방중격절제술(15), 동맥전환술(2), 대동맥하 누두부제거술(2), 총폐정맥이상연결증(2), 폐동맥-대동맥봉합술(Damus-Stansel-Kaye, 1) 등의 고식술이 시행되었다. 완전폰탄술식전 19례의 양방향성 체정맥-폐동맥단락술과 1례의 전(全)체정맥-폐동맥단락술(Kawashima procedure)이 진행되었다. 술전 혈역학소견상, 평균 폐동맥압/폐혈관저항은 14.6 (범위 5-28mmHg) / 2.2 (범위0.4-6.9)wood.unit였으며, 폐혈류/체혈류비가 평균 0.9 (범위0.3-3.0)였다. 이완기말심실압은 평균 9.0 (범위 3.0-21.0) mmHg였고 동맥혈의 산소포화도는 평균 76.0 (범위 45.6-88.0) %였다. 수술은 분계능(terminal crest) 2cm 외측으로 우심이부터 우심방-하공정맥경계부에 종절개를 가하고 하공정맥개구부부터 상공정맥개구부 또는 우심이까지 Gore-Tex 인조도관을 이용하여 외측통동을 형성시키는 방법으로 시행하였으며 필요한 경우 통로상에 4-5.5 mm 직경의 구멍을 만들어 주었다. 동시에 시행한 술식은, 폐동맥성형술(22), 심방중격절제술(21), 폐정맥이상연결증 교정(4), 영구적인 인공심박동기거치(3) 등이었고, 32례에 대하여 통로내 구멍을 만들어 주었으며 그중 1례는 조절형(adjustable)으로 시행하였다. 심방-폐동맥 연결 방법으로 시행한 폰탄술 후 4년후에 발생한 재발성 난치성 상심실형 부정맥환아 1례에 대하여 외측통로형의 변환 폰탄술식이 시행되었다. 수술 직후 혈역학 소견상 평균 폐동맥압, 이완기말심실압, 실온에서 동맥혈의 산소포화도가 각각 12.7 (8-21)mmHg, 7.6 (범위4-12)mmHg, 89.9 (범위68-100) %였다. 병원사망율은 6.7 (7/104) %였고 술후 합병증으로 지속적인 늑막삼출(11), 부정맥(8), 유미흉(9), 중추신경계손상(5), 감염 및 염증(5), 급성신부전(4)이 발생하였다. 평균 27.2 (범위1-85) 개월동안의 외래 추적결과 5명의 만기 사망이 있었다. 저자등은 본연구결과를 토대로 심장내 외측통동폰탄술식이 기능적 단심실 환자에 대하여 비교적 낮은 사망율 및 합병증과 우수한 혈역학으로 시행될수 있는 수술방법이란 사실을 입증하였다.

• Asia Marketing Journal
• /
• 제12권2호
• /
• pp.111-133
• /
• 2010

투자상품의 확산, 고령화 등으로 인한 금융니즈 다양화와 자본시장법 시행으로 인한 금융회사간 치열한 경쟁으로 인해 금융산업 내에서 마케팅의 역할이 더욱 중요해지고 있다. 그러나, 지금까지 다른 산업에 비해 금융산업의 마케팅 연구는 상대적으로 부족하였다. 본 연구는 향후 구체적인 금융마케팅 연구들이 진행되기에 앞서 국내 금융마케팅 연구들을 정리하고, 국내 금융회사 마케팅 담당자를 In-depth 인터뷰하여 실제 국내 금융 마케팅 현황을 조사하였다. 이를 통해 향후 금융마케팅 연구에 필요한 시사점을 얻고자 하였다. 분석 결과, 다른 산업의 마케팅과 다른 금융 마케팅만의 고유 특징에 대한 이론적인 연구가 부족하였고, 금융산업 내에서 은행, 증권, 보험, 카드 산업 간의 마케팅 특징 차이에 대한 연구도 부족하였음을 알 수 있었다. 소비자행동 관점에서 금융고객의 의사결정 과정에 관한 연구도 부족하였다. 또한, 우리나라의 금융회사의 마케팅 현황은 외형적으로 어느 정도 성숙 단계에 접어들었다고 볼 수 있으나, 실제 업무는 여전히 과거의 영업지원, 혹은 프로모션 및 CRM 데이터 분석 등 단기적인 부분에 치중되어 있었다. 그리고, 은행, 증권, 보험, 카드 회사 등 각 세부 금융산업별 마케팅 담당자들이 중요하게 생각하는 금융마케팅의 키워드와 문제 인식 정도도 서로 다름을 알 수 있었다. 본 연구는 이러한 분석 결과를 바탕으로 향후 금융마케팅 연구를 위한 시사점과 함께 6가지의 연구명제를 제안하였다.

• 심성연구
• /
• 제37권2호
• /
• pp.99-148
• /
• 2022

이순신 ≪난중일기≫를 중심으로 이순신의 인격의 몇 가지 의식적 측면을 살펴보고 이순신의 꿈을 분석심리학적으로 해석함으로써 무의식의 목적의미를 추론하고자 하였다. 그의 인간성은 알려진 바와 같이 충, 효를 철저하게 실천했고 나라를 위해 헌신한 영웅의 상과 일치한다. ≪난중일기≫에는 그의 강직함과 함께 매우 인간적인 감성, 오해와 정치적 박해를 겪어야하는 말할 수 없는 고통, 절망과 고독, 육친을 잃은 통곡이 숨김없이 묘사되고 있다. 일기쓰기와 이순신의 '아니마'의 또 다른 표현인 달밤의 시, 피리와 거문고 소리, 그리고 또한 불가해한 꿈을 보고 점을 쳐서 미래를 알아봄으로써 그는 그의 고독을 스스로 치유했다. 미래의 영웅을 키우고 이끌어준 어머니의 위대한 역할과 융이 말하는 모성콤플렉스와의 관계를 살펴보았고, 이순신이 평생 괴로워한 '흉인', 원균이 이순신의 '그림자'로서 이순신이 의식화해야 했던 무의식의 열등한 인격이었다고 추정했다. 이순신의 죽음을 둘러싼 추측은 근거 없는 것으로 확인되었다. ≪난중일기≫에 기술된 이순신의 꿈 중 꿈의 내용이 조금이라도 기술된 꿈 32개와 이순신의 조카 이분(李芬)이 남긴 ≪이충무공행록≫에 수록된 꿈 3개, 총 35개를 살피고 특히 원형적 꿈을 분석심리학적 입장에서 해석하였다. 그 결과 첫째로 받은 인상은 꿈이 이순신에게 '신격에 의해 선택된 사람'이라는 사실을 되풀이 알려주고 있다는 사실이다. 이순신은 이를 바로 그대로 받아들이지 않았다. 그러한 태도 때문에 오히려 자아의 팽창에 빠지지 않았다. 동시성 현상이라고 할 수 있는 꿈과 이에 대한 이순신의 태도를 소개했다. 건강을 해치거나 편견에 빠질 위험을 경고하는 꿈도 있었고 '아니마'상, '자기'의 상징, 창조적 변환의 상징도 꿈에 나타났다. 그리고 무엇보다 그가 왕권을 행사할 수 있는 자격을 갖춘 사람임을 시사하는 꿈이 있었다. 그는 이를 몰랐거나 알았더라도 그런 생각에 관심이 없었을 것이다. 왜냐하면 그는 현세적 왕보다 더 위대한 호국신이 될 것이기 때문이다. 이순신은 항상 천명(天命)을 살폈다. 그리고 천명은 그를 영웅의 길로 인도하면서 영웅신화에 불가결한 고행의 시련을 주었다. 박해자와 위로하는 자가 함께 그의 길을 인도했다. 그의 어머니, 원균, 선조, 그리고 영의정, 유성용까지 모두 이순신 영웅신화를 구체화하는데 기여했다. 이순신은 죽고 신이 되었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국유통학회지:유통연구
• /
• 제16권4호
• /
• pp.65-93
• /
• 2011

B2B 시장에서 구매자와 판매자간의 관계는 매우 밀접하고 장기화되는 것이 특징이므로 결국 단순한 제품을 판매하는 것에 그치는 것이 아닌 지속적인 서비스에 대한 중요성이 날로 커지고 있다. 산업재 연구 전반에 걸쳐서도 서비스에 대한 중요성과 관심이 증대되면서 고객이 서비스를 사용하는데 있어서 그 서비스의 품질과 함께 최근 소비자들은 얼마나 빠르고 쉽게 서비스가 제공되어 투입되는 노력을 최소화시킬 수 있는가를 매우 중요하게 생각하기 때문에 편의성이 중요한 요인으로 고려되어지고 있다. 이에 따라, 본 연구에서는 산업재 시장에서 관계만족과 관계성과를 형성하는데 중요하게 생각할 수 있는 새로운 요인이 어떤 것인가 라는 의문점에서 출발하여, 서비스 편의성과 관계성과 사이의 구조적 관계를 조사하고자 하였다. 이 연구의 가장 큰 학문적 기여점은 산업재 연구에서 주류를 이루고 있는 관계품질과 관계성과의 새로운 선행요인을 검증한 것이다. 또한 소비재 시장에서 주로 연구되었던 서비스 편의성 척도를 산업재 시장에 적용하여 그 활용도를 실험해 보았다는 데 의의가 있다. 본 연구는 서비스 편의성의 구성요소인 서비스 편의성을 결정편의성, 접근편의성, 거래편의 성, 편익편의성, 사후편익편의성 다섯가지 차원으로 구분하고 관계적 요인인 관계만족에 미치는 영향과 이러한 관계만족이 관계몰입과 관계성과에 어떠한 영향을 미치는가를 분석하여 서비스 편의성의 관리와 투자에 대한 마케팅 측면의 중요성을 제시하고 있다. 실증분석을 위해 산업재 서비스를 이용하고 있는 기업의 직원들을 대상으로 설문을 통해 데이터를 수집하였으며 서비스 편의성 ${\rightarrow}$ 관계만족 ${\rightarrow}$ 관계몰입 $\{rightarrow}$ 관계성과에 대한 인과적 구성모텔에 대해 구조방정식 모델분석으로 검증하였다. 구성모텔에 대한 분석결과 서비스 편의성을 구성하는 요소 중 접근편의성을 제외한 나머지 결정편의성, 거래편의성, 편익편의성, 사후편익편의성은 모두 관계적 요인들에 긍정적인 영향을 미쳤으며, 그 중 편익편의성이 관계적 요인에 가장 큰 영향을 주는 것으로 나타났다. 또한 추가적으로 매개효과검증을 실시하여, 서비스 편의성과 관계성과의 관계를 살펴보는데 있어서, 서비스 편의성이 관계만족과 관계몰입을 통해서 관계성과에 긍정적인 영향을 주는 구조적 인 관계를 가지고 있음을 알 수 있었다. 이는 높은 서비스 편의성에 대한 관리와 투자가 구매자로 하여금 관계에 만족하게 만들고 이렇게 형성된 관계만족은 관계에 몰입하게 하여 결과적으로는 관계성과를 가져올 수 있음을 시사한다.