• Title/Summary/Keyword: Compensation Methods

Search Result 1,073, Processing Time 0.657 seconds

Factors Affecting the Level of Self-Perceived Health Recovery among Injured Workers (산재근로자의 주관적 건강회복 수준에 영향을 미치는 요인 분석)

  • Ko, Min-Seok
    • The Korean Journal of Health Service Management
    • /
    • v.9 no.4
    • /
    • pp.183-196
    • /
    • 2015
  • Objectives : The purpose of this study was to analyze the factors affecting the level of subjective health recovery among injured workers. The aim in this study was to find an efficient worker's compensation service for subjective health recovery among injured workers. Methods : From the 1st panel study of worker's compensation insurance, data for 2,000 injured workers was analyzed with SPSS 22.0 and AMOS 22.0. Results : There was a statistically significant difference in the level of self-perceived health recovery depending on socio-demographic characteristics, disability characteristics and medical care services. Factors such as gender, education level, socio-economic level, disability level, claim duration, and treatment duration appropriacy affected the level of self-perceived health recovery. Conclusions : Worker's compensation services should take into consideration the factors that affect the health recovery of injured workers.

Modeling & Error Compensation of Walking Navigation System (보행항법장치의 모델링 및 오차 보정)

  • Cho, Seong-Yun;Park, Chan Gook
    • The Transactions of the Korean Institute of Electrical Engineers D
    • /
    • v.51 no.6
    • /
    • pp.221-227
    • /
    • 2002
  • In this paper, the system model for the compensation of the low-cost personal navigation system is derived and the error compensation method using GPS is also proposed. WNS(Walking Navigation System) is a kind of personal navigation system using the number of a walk, stride and azimuth. Because the accuracy of these variables determines the navigation performance, computational methods have been investigated. The step is detected using the walking patterns, stride is determined by neural network and azimuth is calculated with gyro output. The neural network filters off unnecessary motions. However, the error compensation method is needed, because the error of navigation information increases with time. In this paper, the accumulated error due to the step detection error, stride error and gyro bias is compensated by the integrating with GPS. Loosely coupled Kalman filter is used for the integration of WNS and GPS. It is shown by simulation that the error is bounded even though GPS signal is blocked.

A Novel Multi-Function PV Micro-Inverter with an Optimized Harmonic Compensation Strategy

  • Zhu, Guofeng;Mu, Longhua;Yan, Junhua
    • Journal of Power Electronics
    • /
    • v.16 no.6
    • /
    • pp.2284-2293
    • /
    • 2016
  • With the rapid development of clean energy, photovoltaic (PV) generation has been utilized in the harmonic compensation of power systems. This paper presents a novel multi-function PV micro-inverter with three stages (pseudo-two-stage). It can inject active power and compensate harmonic currents in the power grid at the same time. In order to keep the micro-inverter working under the maximum allowable output power, an optimized capacity limitation strategy is presented. Moreover, the harmonic compensation can be adjusted according to the customized requirements of power quality. Additionally, a phase shedding strategy in the DC/DC stage is introduced to improve the efficiency of parallel Boost converters in a wide range. Compared with existing capacity limitation methods, the proposed strategy shows better performance and energy efficiency. Simulations and experiments verify the feasibility of the micro-inverter and the effectiveness of the strategy.

An Efficient Video Coding Algorithm Applying Brightness Variation Compensation (밝기변화 보상을 적용한 효율적인 비디오 코딩 알고리즘)

  • Kim Sang-Hyun
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.5 no.4
    • /
    • pp.287-293
    • /
    • 2004
  • This paper proposes an efficient motion compensation algorithm for video sequences with brightness variations. In the proposed algorithm, the brightness variation parameters are estimated and local motions are compensated. To detect the frame with large brightness variations, we employ the frame classification based on the cross entropy between histograms of two successive frames, which can reduce the computational redundancy. Simulation results show that the proposed method yields a higher peak signal to noise ratio (PSNR) than that of the conventional methods, with a low computational load, when the video scene contains large brightness changes.

  • PDF

Workers' Compensation of Semiconductor Leukemia Victims (S 전자 근로자 집단 백혈병 사건)

  • Baak, Young Mann
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.22 no.1
    • /
    • pp.26-31
    • /
    • 2012
  • Objectives: To review the occurrence of cancer cluster in S Electronics semiconductor factories, process of epidemiological researches and lawsuit for industrial accident compensation. Methods: Occupational Safety and Heatlh Research Institute (OSHRI) epidemiological research report, Seoul National University (SNU) field survey report and Seoul Administrative Court ruling were investigated. Result:: OSHRI denied the association between working environment and outbreak of cancers, but SNU survey team reported that carcinogens do exist in workplace and the workers are exposed to them. Seoul Administrative Court ruled that 2 victims got cancer due to hazardous chemicals in working environment and be compensated but 3 victims were not acknowledged. Conclusions: Procedure of current OSHRI epidemiological research should be reassessed by the purpose of Occupational Accident Compensation Insurance Law.

Nonlinear Friction Compensation using the Information of Integral Controller (적분 제어기 정보를 이용한 비선형 마찰보상)

  • 송진일;최용훈;유지환;권동수
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.17 no.1
    • /
    • pp.110-119
    • /
    • 2000
  • This paper presents simple and effective nonlinear friction compensation methods. When the direction of position command reverses, the integrator output of the PID controller does not change the sign of its output instantaneously, due to friction at zero velocity, i.e. stiction resulting tracking errors, that results in continuous push even though the command direction has been changed. To overcome this problem, we attempt to reverse the sign of the integrator output as the sign of velocity changes. The effectiveness of this approach is demonstrated by experiments on a 3-PRPS (Prismatic-Revolute-Prismatic-Shperical joints) in-parallel 6-D.O.F manipulator. The control strategy has been analyzed for stability. Also discussed are disturbance observer and velocity observer approaches for friction compensation.

  • PDF

Performance Improvement of Rapid Speaker Adaptation Using Bias Compensation and Mean of Dimensional Eigenvoice Models (바이어스 보상과 차원별 Eigenvoice 모델 평균을 이용한 고속화자적응의 성능향상)

  • 박종세;김형순;송화전
    • The Journal of the Acoustical Society of Korea
    • /
    • v.23 no.5
    • /
    • pp.383-389
    • /
    • 2004
  • In this paper. we propose the bias compensation methods and the eigenvoice method using the mean of dimensional eigenvoice to improve the performance of rapid speaker adaptation based on eigenvoice under mismatch between training and test environment. Experimental results for vocabulary-independent word recognition task (using PBW 452 DB) show that the proposed methods yield improvements for small adaptation data. We obtained about 22∼30% relative improvement by the bias compensation methods as amount of adaptation data varied from 1 to 50, and obtained 41% relative improvement in error rate by the eigenvoice method using the mean of dimensional eigenvoice with only single adaptation word.

Improved Leakage Signal Blocking Methods for Two Channel Generalized Sidelobe Canceller

  • Kim, Ki-Hyeon;Ko, Han-Seok
    • Speech Sciences
    • /
    • v.13 no.1
    • /
    • pp.117-128
    • /
    • 2006
  • The two-channel Generalized Sidelobe Canceller (GSC) scheme suffers from the presence of leakage signal in the reference channel. The leakage signal is caused by the dissimilar impulse responses between microphones, and different paths from speech source to microphones. Such leakage is detrimental to speech enhancement of the GSC since the desired reference signal becomes corrupted. In order to suppress the signal leakage, two matrix injection methods are proposed. In the first method, a simple gain compensation matrix is used. In the second, a projection matrix for reducing the error between the actual and the ideal primary and reference signals, is used. This paper describes the performance degradation resulting from leakage, and proposes effective methods to resolve the problem. Representative experiments were conducted to demonstrate the effectiveness of the proposed methods on recorded speech and noise in an actual automobile environment.

  • PDF

AMOLED Pixel Circuit with Electronic Compensation for Vth and Mobility Variation in LTPS TFTs (LTPS TFT의 Vth와 mobility 편차를 보상하기 위한 AMOLED 화소 회로)

  • Woo, Doo-Hyung
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.46 no.4
    • /
    • pp.45-52
    • /
    • 2009
  • We proposed a new pixel circuit and driving method for the large-area, high-luminance AMOLED applications in this study. We designed with the low-temperature poly-silicon(LTPS) thin film transistors(TFTs) that has poor uniformity but stable characteristic. To improve the uniformity of an image, the threshold voltage($V_{TH}$) and the mobility of the TFTs can be compensated together. The proposed method overcomes the previous methods for mobility compensation, and that is profitable for large-area applications. Black data insertion was introduced to improve the characteristics for moving images. AMOLED panel can operate in two compensation mode, so the luminance degradation by mobility compensation can be released. The scan driver for controlling the pixel circuits were optimized, and the compensation mode can be controlled simply by that. Final driving signal has large timing margin, and the panel operates stably. The pixel circuit was designed for 14.1" WXGA top-emission ANGLED panel. The non-uniformity of the designed panel was estimated under 5% for the mobility compensation time of 1us.

The Derivation of a Model to Estimate Compensation for Damages in Chartered Fisheries by Using CVP Analysis (CVP 분석을 이용한 면허어업 손실보상액 평가 모형의 도출)

  • 정형찬
    • The Journal of Fisheries Business Administration
    • /
    • v.31 no.2
    • /
    • pp.133-153
    • /
    • 2000
  • During the last several decades, Korea has been regarded as one of the fastest growing economies in the world. However, the small size of national land has not met the vigorous demand for land necessary to develop economic infra-structures such as large-scale harbors airports and highways. In order to satisfy the growing demand for land, the Korean government and industry have implemented the national land development programs to reclaim land from the sea fur the several decades. It is certain that these land development programs have resulted in a lot of property disputes between fishermen and public project administrators. This paper is to develop a quantitative model to estimate compensation for damages or restriction of charted fisheries resulting from large-scale public projects. In this paper, the compensation model is derived by using cost-volume-profit analysis framework because the compensation for charted fisheries basically depends on the factors such as the costs, production volume, profit of charted fisheries damaged or restricted by public projects. The model shows that the compensation for damages or restriction of charted fisheries is determined by the average annual profit, damage duration period, and the degree of fishery damages. In addition, the degree of fishery damages measured by the ratio of lost profit to annual average profit turns out to be determined by the following factors: annul profit, unit variable cost, decrease in production volume, the rate of increase in variable cost, and a change in fixed cost. Furthermore, this parer discusses the nam issues related to practices and regulation of the compensation for fishery damages in the current Fishery Act of Korea and suggests some appraisal methods which will be able to lead to theoretically correct and fair compensation for fisheries damages resulting from large-scale public projects.

  • PDF