• Journal of Technology Innovation
• /
• v.16 no.1
• /
• pp.107-139
• /
• 2008

We studied how to achieve successful implementation of massive research and development projects requiring collaboration among industries, universities and government-supported research institute. We have set up an engineering process innovation model to be deemed most adequately for all practical purposes, relying on the theoretical studies on the merits and analysis of the effect of the information system based on Milestone Management, Work Breakdown Structures and Web, which is known to be effective for research project (schedule) management and the objective management, and implemented a real-world web-based project objective management system. After a review of various R & D Project Schedule Management methods, we found that this information system was very compatible with project objective management. This project objective management information system carries out research and development projects effectively and efficiently, getting together in cyber-space and sharing information, and has been equipped with an Early Warning Subsystem to allow for pre-analysis and timely response to potential problems arising from the course of the project. The system also contains an Executive Information System that in real time, automatically provides the management information required by managers with the rate of project progress (achievement, fulfillment and delay). Lastly, actual progress can be cross-checked through both on-line objective management on the web-based information system and design review meeting held on site, to improve the efficiency and validity of the information system. Moreover, overall effect was analyzed through questionnaires on how well the system and generated information meet requirements and on the ultimate impact of the system upon objective management and communication. The questionnaire on the system effect revealed that the information system was useful to objective management and communication, and that the quality of the system was more than acceptable as well.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.51-60
• /
• 2004

In open GIS environment, a GIS client can access spatial data in different types of GIS sowers with the same Interfaces. This means that open GIS components software ensures the interoperability throughout the heterogeneous GIS servers. The user response time, however, tends to be increased, if the client makes use of the standard interfaces for data accesses that can ensure interoperability. This is because the format of spatial data accessed from a specific GIS server must be transformed into common format, such as Rowset in OLE/DB, which is compatible with the standard interfaces. In this paper, we develop efficient techniques for data buffering in GIS client to reduce the response time. We design the buffer management method, which Is based on the space partitioning, and Integrate buffer management components into MapBase, an open GIS component software. And we also, show that buffer management proposed in this paper yields significant performance improvement in GIS client.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.4
• /
• pp.35-43
• /
• 2011

This study examined the structural behaviors of foam insulated concrete sandwich panels subjected to uniform pressure. Finite element models were used to simulate the detailed shear resistance of connectors and the nonlinear behaviors of concrete, foam and rebar components. The models were then validated using data from static tests performed at the University of Missouri. Both composite and non-composite action had a significant effect on the response of the foam insulated concrete sandwich panels, indicating that the simulated shear tie resistance should indeed be incorporated in numerical analyses. The modeling approach used here conveniently simulated the structural behaviors during all loading stages (elastic, yielding, ultimate and post-failure) and was compatible with the American Concrete Institute (ACI) Code and existing design practices. The results of this study will therefore provide useful guidelines for the analysis and design of foam insulated sandwich panels under both static and dynamic loadings.

• Journal of IKEEE
• /
• v.11 no.1 s.20
• /
• pp.69-76
• /
• 2007

This paper presents the design of LVDS (Low-Voltage-Differential-Signaling) transmitter for Gb/s-per-pin operation. The proposed LVDS transmitter is designed using BiCMOS technology, which can be compatible with CMOS technology. To reduce chip area and enhance the robustness of LVDS transmitter, the MOS switches of transmitter are replaced with lateral bipolar transistor. The common emitter current gain($\beta$) of designed bipolar transistor is 20 and the cell size of LVDS transmitter is $0.01mm^2$. Also the proposed LVDS driver is operated at 1.8V and the maximum data rate is 2.8Gb/s approximately In addition, a novel ESD protection circuit is designed to protect the ESD phenomenon. This structure has low latch-up phenomenon by using turn on/off character of P-channel MOSFET and low triggering voltage by N-channel MOSFET in the SCR structure. The triggering voltage and holding voltage are simulated to 2.2V, 1.1V respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.105-108
• /
• 2008

For the early seismic isolation design in Korea, foreign products of isolation bearings were used. But these days, the application of domestic products of isolation bearings is increasing. However various experimental studies can be found very seldom on the extreme and lonr term behaviors of isolation bearings. In this study, we considered the laminated rubber type isolation bearings that have many application cases in Korea and we evaluated their shear strength, long term characteristics such as aging and creep affecting shear strength of bearings in long term period. For the reality of experiments, fabricated isolation bearing specimens are designed for a real structure and shear loading was applied under design compressive loads. To evaluated aging effect, the specimens were exposed to high temperature environment for certain period and their shear properties were measured to compare with their original values. Also we measured creep amount of isolation bearings under constant compressive load for 1,000 hours and estimated creep amount after 60 years compatible with general life cycle of bridges.

• The KIPS Transactions:PartD
• /
• v.9D no.2
• /
• pp.297-306
• /
• 2002

This paper handles the design and implementation of the system for transforming the XML document bated on XML Schema being different in syntax but similar in logic, with using structured differences analysis. In the system, the merge data is generated from the source and destination documents by utilizing data registry and structured differences analysis, and then XML document is generated from the generated merge data. The XML document transformation system is designed that transformation process to the present application system from the different application system gains advantage in the aspect of time, cost, and reliability. The implementation environment of the system is that it is run on IBM compatible PC and it is developed using the software of visual basic 6.0 with the Platform of Windows 2000.

• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.186-195
• /
• 1999

In this paper, the RF-modules composed of front-end, frequency synthesizer, modulator/demodulator and power control multi channel WLL personal system for W-CDMA using 10 [MHz] RF channel bandwidth has been implemented and considered. The measured transmission power is 250 [mW] which is very close to the required value. The measured flatness of power at the final output stage is ${\pm}1.5[dB]$ over the required bandwidth of the receiver. In addition, it is found that the chip rate transmitting spread signal is set to 8.192 [MHz], the required rate. The frequencies of RF_LO signal and LO signal of the modulator and the demodulator measured by a frequency synthesizer are satisfied with design requirements. The operating range of the receiving strength signal indicator and AGC units shows 60 [dB] respectively. Also the measured phasor diagram and eye pattern for deciding the RF modules compatible with baseband digital signal processing part are shown good results.

• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.257-262
• /
• 2014

Although the amount of UCC(user created content) rapidly grows nowadays, there are various problems in authoring, distribution and management of this abundant content because the platforms for fabrication and replaying content are not compatible and the authoring environments are not sufficiently interoperable with other site or with each other. In this paper, we propose a CMS(content management system) scheme improved in interoperability to solve these problems, and we design a novel system enhancing the efficiency and speed of content distribution and management by minimizing the repetitions in the processes of production, reshaping, and publication. Moreover the proposed system adopts an improved content management technology by changing from simple point-to-point method to the centralized distribution method, and as for the service scheme, we change from the site link method to the database link method, and we also take duplex interlink scheme instead of simplex one. We finally compare the proposed system to the conventional ones as points of view of compatibility and interoperability to prove the improved performance of our system.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.196-200
• /
• 2004

A guard lamp system has been installed at the PV positive center, located at Gwangju in Korea. Digital environment that is represented to internet is displacing business way of industry and business achievement way with the fast speed being giving great change on life whole, improve existence business process utilizing internet and Web connection technology, information superhighway to tradition industrialist manufacture and e-transformation's propulsion that wish to maximize productivity and administration efficiency is spread vigorously. In this paper, we wish to accomplish generation equipment's heighten stability and believability through remote monitoring and control of guard lamp system. This paper describes the design of the monitoring system for the sensing data and indirect controlling of the guard lamp system. Most of the conventional monitoring systems depend on the special hardware and software. The essential design of monitoring system is to provide the convenience for the user and the portability for the system. In order for the system to fulfill its requirements, it was designed using Labview GUI facility based on the Windows 2000 environment of IBM PC compatible and Add-on card based on the TCP/IP protocol. Advantage of the monitoring system are a personnel expenses curtailment effect, of the place restriction and unmanned system of the generation plants, etc..

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.336-339
• /
• 2013

Arduino is for design based on open source prototyping platform, artist, designer, hobby activists, etc, i has been designed for all those who are interested in the environment construct. Arduino adventage you can easily create applications hardware, without deep knowledge about the hardware. Configuration of arduino using AVR microcontroller ATmage 168, software to action arduino using arduino program, MATLAB, Processing. Arduino is open source base, you can hardware production directly and using shield additionally, the arduino can be combined. Android AKD is open source. You can create android smart phone application. By the way compatible and can be used android ADK add arduino Manifast. Using arduino program, arduino bread-board design on hardware., create button click, connection with each other. In this paper, sortware was used for arduino program and android ADK, hardware was used for arduino MegaADK board, After making one accessory using the software and hardware verification.