• 국제초고층학회논문집
• /
• 제10권4호
• /
• pp.345-364
• /
• 2021

Developments in the understanding of fire behaviour for large open-plan spaces typical of tall buildings have been greatly outpaced by the rate at which these buildings are being constructed and their characteristics changed. Numerous high-profile fire-induced failures have highlighted the inadequacy of existing tools and standards for fire engineering when applied to highly-optimised modern tall buildings. With the continued increase in height and complexity of tall buildings, the risk to the occupants from fire-induced structural collapse increases, thus understanding the performance of complex structural systems under fire exposure is imperative. Therefore, an accurate representation of the design fire for open-plan compartments is required for the purposes of design. This will allow for knowledge-driven, quantifiable factors of safety to be used in the design of highly optimised modern tall buildings. In this paper, we review the state-of-the-art experimental research on large open-plan compartment fires from the past three decades. We have assimilated results collected from 37 large-scale compartment fire experiments of the open-plan type conducted from 1993 to 2019, covering a range of compartment and fuel characteristics. Spatial and temporal distributions of the heat fluxes imposed on compartment ceilings are estimated from the data. The complexity of the compartment fire dynamics is highlighted by the large differences in the data collected, which currently complicates the development of engineering tools based on physical models. Despite the large variability, this analysis shows that the orders of magnitude of the thermal exposure are defined by the ratio of flame spread and burnout front velocities (V_S / V_BO), which enables the grouping of open-plan compartment fires into three distinct modes of fire spread. Each mode is found to exhibit a characteristic order of magnitude and temporal distribution of thermal exposure. The results show that the magnitude of the thermal exposure for each mode are not consistent with existing performance-based design models, nevertheless, our analysis offers a new pathway for defining thermal exposure from realistic fire scenarios in large open-plan compartments.

• 대한조선학회논문집
• /
• 제51권2호
• /
• pp.148-153
• /
• 2014

Submerged bodies such as autonomous underwater vehicles (AUV) or remotely operated vehicles (ROV) are widely used in various fields of exploring underseas. Those bodies keep ballasting and deballasting for stable navigation and operation. Identifying the internal volumetric spaces of the bodies is a primary step for such an operation. Unfortunately, most CAD models given to the engineer do not properly represent the compartments since each face of a compartment exists as an independent entity rather than as a face that belongs to the compartment. In this paper, an algorithm that automatically identify the faces as a group that forms a closed volumetric space, i.e., a compartment is presented. A submerged body is sliced into a number of cross sections. Each sliced section is analyzed to yield closed loops that are sections of the compartment. Then, the associated closed loops are gathered along the longitudinal direction to form a compartment. The algorithm presented is shown to provide a practical and reasonable solution that can readily be used in various applications.

• Journal of applied mathematics & informatics
• /
• 제7권1호
• /
• pp.161-174
• /
• 2000

The total number of deaths and total sojourn times of African honey bees are studied using semi-markov compartment analysis. This generalizes many existing biological models.

• 한국CDE학회논문집
• /
• 제6권3호
• /
• pp.174-183
• /
• 2001

This study proposes an improved genetic algorithm (GA) to derive solutions for facility layout problems having inner walls and passages. The proposed algorithm models the layout of facilities on a flour-segmented chromosome. Improved solutions are produced by employing genetic operations known as selection, crossover, inversion, mutation, and refinement of these genes for successive generations. All relationships between the facilities and passages are represented as an adjacency graph. The shortest path and distance between two facilities are calculated using Dijkstra's algorithm of graph theory. Comparative testing shows that the proposed algorithm performs better than other existing algorithm for the optimal facility layout design. Finally, the proposed algorithm is applied to ship compartment layout problems with the computational results compared to an actual ship compartment layout.

• Nuclear Engineering and Technology
• /
• 제35권2호
• /
• pp.171-177
• /
• 2003

A dynamic compartment model was required for the prediction of radiological consequences of the tritiated vapor released from the nuclear facility after an accident. A computer code, ECOREA-T, was developed by incorporating the unit models for the evaluation of tritium behavior in the environment. Dry deposition of tritiated vapor from the atmosphere to the soil was calculated using a deposition velocity. Transport of tritium from the atmosphere to the plant was calculated using a specific activity model, and the result was compared with the Belot's analytic solution. Root uptake of tritiated water from the soil and formation of OBT from T were considered in the model. The ECOREA-T code was verified by comparing the results from the other computer codes using a scenario developed through BIOMOVS II study. The results showed good agreements.

• Nuclear Engineering and Technology
• /
• 제37권4호
• /
• pp.385-390
• /
• 2005

The effect of the Wolsong Tritium Removal Facility on the change of tritium concentration in the soil water was assessed by introducing a dynamic compartment model. For the mathematical modeling, the tritium in the environment was thought to come from two different sources. Three global tritium cycling models were compared with the natural background concentration. The dynamic compartment model was used to model the behavior of the tritium from the nuclear power plants at the Wolsong site. The source term for the dynamic compartment model was calculated with the dry and wet deposition rates. The area around the Wolsong nuclear power plants was represented by the compartments. The mechanisms considered in deriving the transfer coefficients between the compartments were evaporation, runoff, infiltration, hydrodynamic dispersion, and groundwater flow. We predicted what the change of the tritium concentration around the Wolsong nuclear power plants would be after future operation of the tritium removal facility to show the applicability of the model. The results showed that the operation of the tritium removal facility would reduce the tritium concentration in topsoil water quickly.

• 자동차안전학회지
• /
• 제14권1호
• /
• pp.32-38
• /
• 2022

In the automobile industry, lamps are frequently used as a mean to emphasize each company's brand identity. Therefore, many detailed design models have emerged in order to realize a differentiated image in preparation for competitive vehicles. Among them, the design of a multi compartment lighting image concept that realizes light divided in multiple space also being introduced by various manufacturers. In this study, in order to solve the problem of cost and weight rise that the existing multi compartment image lamp has, using TRIZ method such as functional analysis modeling and trimming. Through this process, an idea to minimize cost and weight was derived. As the idea was designed in detail, the formation of light did not go as desired, and the diffusion of light also proceeded differently than intended. In order to overcome this problem, a new concept of corrosion and diffusion structure was applied. Eventually, it overcomes various problems and successfully applied it to a real vehicle. The idea was actually reflected in the "Santa Fe" model. Later, the media focused on the lamps to which the idea was applied, and contributed to the sale of a large number of vehicles by providing consumers with a new light sensibility. During the research process, it was possible to secure a number of patents and knowledge of new design concepts.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.218-219
• /
• 2002

In the past, the development of pharmacokinetic/pharmacodynamic (PK/PD) models for quantitating the time course of drug responses was mainly based on two types of models, the empirical effect compartment model that simply accounts for the delay between effect and plasma concentration (hysteresis) and the mechanism-based so-called indirect response model. The first approach traces back to a paper by Segre (1) and its application was popularized by Holford and Sheiner (2); indirect response models were introduced by Jusko's group (3). (omitted)

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.478-492
• /
• 2021

In this study, hull dimensions of an FPSO were optimized to maximize its operability at Brazil field. In contrast with the previous works which have used simplified models to evaluate some indicators related to stability and hydrodynamic performances of FPSOs for its own optimal design, we developed a generic hull and compartment modeler and sophisticated stability and hydrodynamic calculation modules. With the aid of the developed tools, the hull optimization was performed with initial dimensions of an FPSO originally designed for west Africa field. The optimization results indicated the relative importance of hydrodynamic performances compared with stability performances for the FPSO hull dimensioning by showing that there were 3 active constraints related to them, which were the natural periods of heave and roll and the maximum pitch angle under 1-year return period waves at full load condition. To the author's knowledge, this study is the first attempt to combine altogether the hull and compartment modeling and full set of stability and hydrodynamic calculations precisely to optimize an FPSO's hull dimensions within 30 min. Also, it is worthwhile to mention that the developed methods are generic enough to be applied to all types of ship-shaped offshore platforms.

• Journal of the korean society of oceanography
• /
• 제39권2호
• /
• pp.136-147
• /
• 2004

Different model formulations in available models were compared with Microplankton-Detritus (MPB) model, and well documented FDM and ERSEM models were the candidate for these comparison. Different formulations in both candidate models were expressed in terms of MPD parameterization. Even though there are differences in the control of autotroph growth among models, it was found that some of the more important microplankton parameters expressed incomparable terms have broadly similar values in all the models. However, an important difference was proved to be the direct contribution of microheterotrophs to the Detritus compartment in FDM and ERSEM, whereas in MPD microplankton biomass passes to Detritus only by way of mesozooplankton grazing.