• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2952-2959
• /
• 2013

In this paper, a smart meter applying the international communication protocols has been developed. A smart meter requires communication protocols for two-way communication and control technology, registration and deregistration of electronic devices between electric power suppliers to exchange data. Standardization for communication protocols of a smart meter has been proceeding both in the US and Europe. The smart meter developed in this paper applied ANSI C12.22 as a communication protocol which is a north american standard. A smart meter should also provide the electric consuming information and electricity charge information to the customer in real time. Thus, the customer can behave the demand response based on this information. In this paper, the measured electricity from the smart meter is reported to the customer, and IHD(In Home Display) implemented with the windows software presents the reported real time data.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.159-164
• /
• 2013

Recently the solution integrated of vision and motion controller which are important element in automatiomn system has been many developed. However typically such a solutions has a many case that integrated vision processing and motion control into network or organized two chip solution on one module. We implement one chip solution integrated into vision and motion controller using Zynq-7000 that is developed recently as extended processing platform. We also apply EtherCAT to motion control that is industrial Ethernet protocol which have compatibility for open standardization Ethernet in order to control of motion because EtherCAT has a secure to realtime control and can treat massive data.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.31-43
• /
• 2006

As of March 2005, the standard of traffic signal controllers became effective. The standard presents specifications and functions of a traffic signal controller which collects traffic information, sends it to the traffic control center, and controls traffic signal with adequate traffic signal timing provided by the traffic control center. Since the controllers by the previous standard lack parts compatibility and have different control functions and communication protocol, the maintenance cost has been increased. Also, some important functions like conflict detection have not worked out perfectly. To overcome these disadvantages, first of all, this standard secures hardware compatibility. Conflict detection method has been enhanced. Communication protocol to the traffic control center was included in the standard. With this standard, independent maintenance system and prompt treatment of hardware malfunctions becomes possible. Also, the unified intersection traffic control method will increase traffic safety.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1602-1608
• /
• 2013

PoC (Push-to-Talk over Cellular) provides one-to-one as well as one-to-many communications with VoIP technology based on SIP over cellular networks. According to above property, PoC is considered as perscrptive technology for public protection for disaster relief networks. For this networks, group communication is the essential function. However, since current standardization process takes into general scenarios account without any consideration for mentioned networks, it have some problems in the point of adaptability. To solve above problem, in this paper, we propose how to reduce the overhead on the PoC server to reduce the transmission delay. Simulation results are shown to evaluate the improved performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.6
• /
• pp.1182-1189
• /
• 2007

As ubiquitous environment rapidly emerges due to the development of network and information communication technology, ubiquitous computing is being noticed as a technology that will take the lead in information technology industry of the future. To the end, the data recognized from each sensors, collected and processed need be transferred to applied service so that they may be used as data for providing sum to users. However, in reality as the definitions of metadata and platform for each sensor are not clear, approach from applied service for data use is difficult and there are limitations in transferring sensor measurement data of the applied service because of the difference of platform and protocol. In this paper, we designed sensor service technology language that expresses sensor and measurement data and describes the service though sensor data service. Also the researcher implemented a sensor data processing system that transfers sensor data to the applied service by using web service. The thesis will apply a reference model for standardization to guarantee mutual compatibility in exchanging sensor data through the system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.91-98
• /
• 2021

In most hacking attacks, hackers tend to access target systems in a variety of circumvent connection methods to hide their original IP. Therefore, finding the attacker's IP(Internet Protocol) from the defender's point of view is one of important issue to recognize hackers. If an attacker uses a proxy, original IP can be obtained through a program other than web browser in attacker's computer. Unfortunately, this method has no effect on the connection through VPN(Virtual Private Network), because VPN affects all applications. In an academic domain, various IP traceback methods using network equipments such as routers have been studied, but it is very difficult to be realized due to various problems including standardization and privacy. To overcome this limitation, this paper proposes a practical way to use client's network configuration temporarily until it can detect original IP. The proposed method does not only restrict usage of network, but also does not violate any privacy. We implemented and verified the proposed method in real internet with various VPN tools.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.132-138
• /
• 2012

VANET(Vehicular Ad-hoc Network), standardization of IEEE 802.11p specification is in process. 802.11 MAC protocol grants all nodes equal opportunity to acquire channel without regard to their bit-rates, making it possible for lower bit-rate nodes to occupy communication channel for a fair amount of time thus keeping the higher bit-rate nodes from acquiring connection channel which downward-equalize the overall network performance. Also with the 802.11p MAC protocol, the probability of collision occurring increases as the number of nodes grow. The proposed algorithm is a new MAC protocol that guarantees nodes with acquired channel a firm priority over other nodes for a fixed amount of time with TXOP concept added to 'packet burst' according to the current transmitting speed. This newly designed algorithm allows the construction of wireless network with enhanced network throughput, decreased probability of collisions as well as providing the means to grant each node a fair chance of acquiring connection according to their channel conditions. The algorithm sets the CW's (Contention Window) width wider than the standard's and modulates the continuous transmitting threshold value depending on channel acquired time, thus improving the overall performance of the network.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.59-63
• /
• 2022

In recent years, research on smart factory wireless mobile communication technology that wirelessly remotely controls utilities is being actively conducted. The Wi-SUN(Wireless Smart Utility Network) Alliance proposed Wi-SUN protocol structure suitable for building a platform such as a smart factory as a new wireless communication standardization standard based on EEE802.15.4g/e. It analyzes the performance of the IEEE802.15.4e CSL(Coordinated Sampled Listening) Mode MAC(Media Access Control) in terms of power consumption and looks at considerations for efficient operation. Although CSL-MAC can dramatically reduce power consumption at the receiving end in an asynchronous manner, it has been found that the transmitting end has a disadvantage in that power consumption occurs due to an excessive wake-up sequence.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.65-70
• /
• 2024

In recent years, research on smart factory wireless mobile communication technology that wirelessly remotely controls utilities is being actively conducted. The Wi-SUN (Wireless Smart Utility Network) Alliance proposed a Wi-SUN protocol structure suitable for building a platform such as a smart factory as a new wireless communication standardization standard based on EEE802.15.4g/e. It analyzes the performance of the IEEE802.15.4e Receiver Initiated Transmission(RIT) Mode Media Access Control (MAC) in terms of throughput and latency, and looks at considerations for efficient operation. RIT mode shows that as the check interval becomes longer, delay time and throughput decrease. It was shown that as the traffic load increases, if the RIT check interval is shortened, the delay time can be shortened and throughput can be increased. RIT mode has the advantage of low power consumption and has neutral characteristics between IEEE802.15.4 and CSL mode in terms of delay time and throughput.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.1
• /
• pp.45-52
• /
• 2009

Currently broadcasting and telecommunication has integrated, And IPTV Service has appeared who called TPS(Triple Play Service) which integrated with broadcasting, telecommunication and Phone Service. IPTV provide broadcasting service and VOD(Video on Demand) service, and it must be satisfied digital content security. For this condition, IPTV Forum working on standardization of interface for digital content security. The Security solution for broadcasting and VOD are CAS (Conditional Access System) and DRM(Digital Rights Management). But these solutions manufactured by many vendors, so there is no inter-operability. And after finished standardization of interface for CAS and DRM system, the problem of inter-operability with them will be issued. For this reason, Rights management system which possible to operate independently with platform is necessary. In this paper, To protect multimedia digital content, we designed and implemented Conditional Access Management System.