• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.21-30
• /
• 2004

This paper describes the design of RF link between RSE and OBU of ETCS and the analysis of the antenna beam pattern to get a proper communication area in the cross direction and traveling direction of lanes. This stage should be performed prior to determination of system requirements of ITS service based on active DSRC. This study is important and fundamental technical analysis to design and implement base station of ETCS.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.319-323
• /
• 2005

As the software industry develops at a rate speed, anyone can copy or plagiarize without difficulty contents that are becoming digitalized. To make it worse, the development of various contents that be illegally copied and plagiarized are resulting in the increasing infringement on and the plagiarism of the intellectual property. This dissertation tries to put forth the method and the theory to effectively detect any plagiarism of the source code of programs realized in various languages. This dissertation analyzes the advantage and disadvantage of the plagiarism test software, and especially, presents a method to detect possible plagiarism by using the Pattern Matching to overcome its disadvantage. And it also intends to introduce more developed automatic detection system by overcoming the problems with the method of Pattern Matching.

• Journal of Sensor Science and Technology
• /
• v.26 no.3
• /
• pp.173-178
• /
• 2017

In this paper, we newly developed an omnidirectional receiver for visible light communication (VLC). The omnidirectional receiver was composed of a flexible solar cell attached on a cylindrical surface with its axis in vertical direction. The solar cell surface was symmetrical and showed an almost uniform receiving pattern in a horizontal plane. The maximum difference in a receiving pattern was within 7% of its peak value in a horizontal plane. This configuration is very easy to fabricate and useful in constructing wireless sensor networks in which one receiver needs to detect multiple LED signals in different directions.

• Journal of Korean society of Dental Hygiene
• /
• v.17 no.5
• /
• pp.943-955
• /
• 2017

Objectives: This study aims to suggest the future direction to improve dental hygienists' competencies to communicate with patients to increase the compliance and dental service satisfaction, based on the analysis of survey data given to patients on dental hygienists' communication patterns with patients. The findings of this research is aimed to serve as the basic data for future researches on related area. Methods: A survey was conducted to ordinary people with experiences of receiving dental treatment in Gwangju and Jeonnam from July 29th 2017 to September 10th 2017. 224 copies of the questionnaire were used for final analysis. Results: The scores of each communication pattern (informative, friendly, and authoritative patterns) of dental hygienists perceived by research subjects were as follows: $3.76{\pm}0.76$, $3.47{\pm}0.62$, and $2.64{\pm}0.70$ respectively. In the effects of communication patterns on the compliance of patients, it was found that the informative communication pattern (${\beta}=0.227$, p=0.008) and friendly communication pattern (${\beta}=0.216$, p=0.012) had positive (+) effects. Conclusions: Thus, the results of this study verified that dental hygienists' communication patterns are important elements affecting patients' compliance and their satisfaction. For the smooth patient-centered bilateral communications, it will be necessary to continuously develop educational programs related to dental hygienists' communication, and also to have continuous researches targeting patient groups for the comparison to meet dental service satisfaction.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.65-70
• /
• 2011

These days, printed electronics attract attention from electronics industry. In this paper, the fabrication of the fine patterns by Near Field Electro Spinning (NFES) was studied by using Ag ink on silicon wafer (substrate). Two types of ink, the high viscous ink Ag-200 and low viscous ink Ag-15, were used. The fine and uniform patterns were easily fabricated by using Ag-200 because jet breakup is less occurred in high viscosity solution. As increasing flow rate of solution, aspect ratio of Ag pattern decreased. And there was optimum applied voltage for fine pattern. In case of Ag-200, the optimum applied voltage was about 2.02KV. When pattern was fabricated by NFES, the pattern width and height were affected by many factors such as viscosity, flow rate of solution, applied voltage etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.666-670
• /
• 2015

This paper presents radiation pattern reconfigurable antenna for Fitbit Flex wristband which detects vital signal. Also, the paper presents Specific Absorption Rate (SAR) from the loop-dipole radiation pattern reconfigurable antenna based on the position of human body. The proposed loop-dipole radiation pattern reconfigurable antenna produces two opposite side direction radiation pattern using two RF switches. The resonant frequency of the radiation pattern reconfigurable antenna is Bluetooth communication bandwidth (2.4 - 2.485 GHz) and the maximum gain of the proposed antenna is 1.96 dBi. The proposed antenna satisfied the standard SAR value of 1.6 W/kg in 1 g tissue of the human body when the Bluetooth communication input average power of 0.04 W is excited to five parts of human body (head, chest, stomach, back, wrist). The maximum SAR value of in this simulation is presented in the part of head.

• Journal of information and communication convergence engineering
• /
• v.10 no.2
• /
• pp.123-128
• /
• 2012

In communication systems, there are various types of microstrip antenna that can be used for many applications. This paper mainly focuses on the simple design of an inset rectangular microstrip patch antenna to operate at a frequency of 2.45 GHz for rectenna design. The study involves using an high frequency structure simulator to design the antenna dimensions and to determine its performance. This antenna is based on a thickness of 1.6 mm flame retardant 4 (FR-4) substrate having a dielectric constant of approximately 4.7, an inset feed, and a ground plane. After simulation, the antenna performance characteristics such as its return loss, voltage standing wave ratio, gain, and radiation pattern were obtained and compared with the fabricated measured antenna.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5
• /
• pp.1426-1433
• /
• 2000

As distributed computing systems become popular, many modeling techniques and methods have been developed in specify the specification formally and verify the distributed/concurrent sytems. In spite of importance of communication in distributed object-oriented systems, specifying of communication method generally has not been emphasized in the design phase. One reason is due to the system designer misunderstanding, that is, a specification needs to be independent on the implementation. However, since defining communication pattern indistributed object-oriented systems is more serious than the required message passing method in the design phase. specifying the communication pattern is necessary instead of postponing until the implementation. In this paper, two formal specification techniques, temporal logic method and Petri nets method, for the communication in distributed systems are discussed. One is based on the temporal logic, which specifies the different patterns of primitive predicates. This method enable to define the underlying mechanism which can be interpreted as constraints. The Petri net method helps to specify the dynamic behavior of communicational patterns using the properties of Petri nets.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1256-1259
• /
• 2002

In this paper, we have proposed license plate recognition system for multi-national vehicle license plate using geometric features along with hybrid and seven segment pattern vectors. In the proposed system, we suggested to find horizontal and vertical relation after going through preparation process with inputted real-time license plate image of Korea and Japan, and then to classify license plate with using characteristic and geometric information of license plates. It classifies the extracted license plate images into letters and numbers, such as local name, local number, classification character and license consecutive numbers, and recognize license plate of Korea and Japan by applying hybrid and seven segments pattern vectors to classified letter and number region. License plate extraction step of the proposed system uses width and length information along with relative rate of Korean and Japanese license plate. Moreover, it exactly segmentation by letters with using each letter and number position information within license plate region, and recognizes Korean and Japanese license plates by applying hybrid and seven segment pattern vectors, containing characteristics related to letter size and movement within segmented letter area. As the result of testing the proposed system in real experiment, it recognized regardless of external lighting conditions as well as classifying license plates by nations, Korea and Japan. We have developed a system, recognizing regardless of inputted structural character of vehicle licenses and external environment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.10
• /
• pp.1712-1732
• /
• 2011

Cloud provides dynamically scalable virtualized computing resources as a service over the Internet. To achieve higher resource utilization over virtualization technology, an optimized strategy that deploys virtual machines on physical machines is needed. That is, the total number of active physical host nodes should be dynamically changed to correspond to their resource usage rate, thereby maintaining optimum utilization of physical machines. In this paper, we propose a pattern-based prediction model for resource provisioning which facilitates best possible resource preparation by analyzing the resource utilization and deriving resource usage patterns. The focus of our work is on predicting future resource requests by optimized dynamic resource management strategy that is applied to a virtualized data center in a Cloud computing environment. To this end, we build a prediction model that is based on user request patterns and make a prediction of system behavior for the near future. As a result, this model can save time for predicting the needed resource amount and reduce the possibility of resource overuse. In addition, we studied the performance of our proposed model comparing with conventional resource provisioning models under various Cloud execution conditions. The experimental results showed that our pattern-based prediction model gives significant benefits over conventional models.