Journal of information and communication convergence engineering

The Korea Institute of Information and Commucation Engineering (한국정보통신학회)
권호 표지
DOI QR코드

DOI QR Code

Design of Inset Microstrip Patch Antenna for Wireless Power Transmission at 2.45 GHz

  • Pradhan, Sajina (Department of Information and Communication Engineering, Chosun University) ;
  • Noh, Sun-Kuk (Department of Electronics Engineering, Chosun University) ;
  • Choi, Dong-You (Department of Information and Communication Engineering, Chosun University)
  • Received : 2012.03.06
  • Accepted : 2012.04.09
  • Published : 2012.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

In communication systems, there are various types of microstrip antenna that can be used for many applications. This paper mainly focuses on the simple design of an inset rectangular microstrip patch antenna to operate at a frequency of 2.45 GHz for rectenna design. The study involves using an high frequency structure simulator to design the antenna dimensions and to determine its performance. This antenna is based on a thickness of 1.6 mm flame retardant 4 (FR-4) substrate having a dielectric constant of approximately 4.7, an inset feed, and a ground plane. After simulation, the antenna performance characteristics such as its return loss, voltage standing wave ratio, gain, and radiation pattern were obtained and compared with the fabricated measured antenna.

Keywords

References

  1. C. A. Balanis, Antenna Theory: Analysis and Design, 2nd ed., New York, NY: John Wiley & Sons, 1997.
  2. D. M. Pozar, Microwave Engineering, 2nd ed., New York, NY: John Wiley & Sons, 1998.
  3. Y. Hu, D. R. Jackwon, J. T. Williams, and S. A. Long, "A design approach for inset-fed rectangular microstrip antennas," Proceedings of IEEE Antennas and Propagation Society International Symposium, Albuquerque, NM, pp. 1491-1494, 2006.
  4. M. Ramesh and K. Yip, "Design formula for inset fed microstrip patch antenna," Journal of Microwaves and Optoelectronics, vol. 3, no. 3, pp. 5-10, 2003.
  5. I. Surjati, K. N. Yuli, and A. Astasari, "Microstrip patch antenna fed by inset microstrip line for Radio Frequency Identification (RFID)," Proceedings of Asia-Pacific Symposium on Electromagnetic Compatibility, Beijing, China, pp. 1351-1353, 2010.